Out of Stock - On Backorder
ANTENNA/VHF/UHF Broadband, 30-512 MHZ 9-33-26P3
ANTENNA/VHF/UHF Broadband, 30-512 MHZ 9-33-26P3Type 9-33-26 VHF/UHF Broadband Antenna / 30 MHz - 512 MHz
The 9-33-26P3 VHF/UHF Broadband Antenna is designed to provide communications over the 30 MHz to 512 MHz frequency range for general purpose airborne applications. This VHF/UHF antenna is configured as a broadband fan monopole incorporating a frequency dependent matching network to ensure acceptable VSWR at lower frequencies, while preserving optimum gain at higher frequencies. A susceptance compensation network is included for gain enhancement at lower frequencies. The 9-33-26P3 is composed of a pressure molded composite radome housed within which houses the electrical assembly, and an aluminum alloy baseplate supports a single RF connector.
- VHF/UHF broadband antenna
- Covers 30 MHz – 512 MHz frequency range
- Moulded composite radome with aluminum baseplate
Product Codes | |
|---|---|
| Mfr Part No: | 9-33-26P3 |
Weight: 1 kgDimensions: 331 x 66 x 173.5 mm, maximumAerodynamic Loads: 3500 kgf/m2 (5 psi) (minimum ultimate)Aerodynamic Drag: 19N (1.95 kgf) at 250 knots EAS and 457.2 mMounting Configuration: 8 holes fixed locationElectrical:Frequency: 30 to 512 MHzGain: > -25 dBi @ 30 MHz > -15 dBi @ 88 MHz > -4 dBi @ 118 to 174 MHz > 0 dBi @ 225 to 215 MHzPolarization: Predominantly vertical when mounted verticallyRadiation Pattern: Omni-directional in azimuthPower Rating: 25 W CW @ 30 to 174 MHz, maximum 45 W CW @ 225 to 400 MHz, maximumImpedance: 50Ω, nominalVSWR: < 2.5:1Connector: TNC Type FemaleEnvironmental:High Temperature: MIL-STD-810E, Method 501.3, Procedures I and II Continuous Operational: 55°C Intermittent Operational: 71°C Storage: 85°CLow Temperature: MIL-STD-810E, Method 502.3,Procedures I and II Operational: -54°C Storage: -57°CAltitude: MIL-STD-810E, Method 500.3, Procedures I and II Operational: 15,240 m Storage: 15,240 mTemperature Shock: MIL-STD-810E, Method 503.3Vibration: MIL-STD-810E, Method 514.4, Procedure I, Category 4 0.01 g2/Hz 15 to 2000 Hz L1 = 0.6 g2/Hz at 68 HzShock: MIL-STD-810E, Method 516.4, Procedures I and V Functional: 20 g, 11 ms, sawtooth Crash Hazard: 40 g, 11 ms, sawtoothRain: MIL-STD-810E, Method 506.3, Procedure I Normal operation when exposed to blowing rainHumidity: MIL-STD-810E, Method 507.3, Procedure III 95% relative humidity at 60°CSalt Fog: MIL-STD-810E, Method 509.3, Procedure I 48 hours exposure to 5% salt solutionAcceleration: MIL-STD-810E, Method 513.4, Procedure I 13.5 g all axesMagnetic Effect: RTCA DO-160D, Section 15, Category Z Less than 1° deflection at 300 mm
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: 9-33-26P3
$0.00
