This Hi-Isolation amplified network loaded DC blocked GPS splitter features one input and eight outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other ports J2—J8 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.
This Hi-Isolations amplified GPS splitter (Alternate Part# NHIALDCBS) features one input and eight outputs, SMA-type female connectors, 5-volt output voltage, and 9-32 VDC [customer supplied] source voltage with MIL DC Connector (Includes Mate).
- Excellent amplitude balance: <1 dB variation between ports
- Flat group delay: <1 ns between L1 & L2
- High output gain: 14 dB across operating frequencies
- Wide accepted frequency range: covers entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
- Matched phase balance: < 14° variation between ports
Product Codes | |
|---|---|
| Mfr Part No: | NHIALDCBS1X8-S/5/MC |
Weight: 19.3 oz (547 g)Dimensions: 1.3 x 5.25 x 2.5 inOperating Temperature: -57°C to 87°CFrequency Response: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩInput SWR: 2.0:1Output SWR: 2.0:1Noise Figure (Typical): L1: 2.25 dB L2: 4.75 dBGain Flatness: 0.5 dB, typical (1.0 dB, max.)Amplitude Balance: 1.0 dB, max.Phase Balance: 14°, max. between portsIsolation: L1: 16 dB L2: 12 dBGroup Delay Flatness: 0.25 ns, typical (1 ns, max.)Input P1dB: -23 dBmSource Voltage: 9-32 VDC [customer supplied] Mil DC Connector (Includes Mate)Output Voltage Option: 5V @ 130 mAConnector Option: SMA type
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: NHIALDCBS1X8-S/5/MC
