The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards.
This mil-spec GPS splitter (Alternate Part# MILLDCBS-S) features one input & two outputs, and has SMA-type connectors.
- Precise amplitude balance: < 1 dB variation between ports
- Flat group delay: < 1 ns between L1 & L2 bands
- Low insertion loss: -4.0 dB loss across operating frequencies
- Wide accepted frequency range: covering entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm fauls
- Matched phase balance: < 2° variation between ports
- Qualification and test reports available
Product Codes | |
|---|---|
| Mfr Part No: | MIL-LDCBS1X2-SMA |
Weight: 10.2 lb, max.Dimensions: 1.3 x 3.25 x 2.5 in (without connectors)Operating Temperature: -57°C to 87°CHousing base plate Finish: electroless nickel-plated (MIL-C-26074C, class 1)Frequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩInput SWR: 2.0:1, max.Output SWR: 2.0:1, max.Insertion Loss: -3.0 dB to -5.0 dB (-4.0 dB, typical)Gain Flatness: 0.25 dB, typical (1.0 dB, max.)Amplitude Balance: 0.10 dB, typical (1.0 dB, max.)Phase Balance: 1.0°, typical (2.0°, max.)Isolation: L1: 22 dB L2: 15 dBGroup Delay Flatness: 0.10 ns, typical (1.0 ns, max.)Connector Option: SMA-type female
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: MIL-LDCBS1X2-SMA
