RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MCVariable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput VoltageThis variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna. Custom gain, DC power, and connector configurations are available. This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors, and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. Re-radiating amplifier with external power supply: 30 dB typical gainOption mounting kit hardwareOptional variable gain amplifier: adjustable from 1 dB — 25 dBOptional variable gain amplifier with LCD: adjustable from 1 dB — 30 dBProduct CodesMfr Part No:VGLCDPNRRKIT-TNC/0/MCRe-Radiating Antenna:
Weight:
1.7 oz (48 g)
Dimensions:
0.67 x 2.6 x 2.6 in
Operating Temperature:
-40°C to 85°C
Frequency:
1.572 GHz — 1.578 GHz
Axial Ratio:
3 dB, max.
Peak Gain:
4 dBic
Bandwidth:
20 MHz, min.
Input SWR:
1.5:1, max.
Characteristic Impedance:
50Ω
Â
Re-Radiating Amplifier
Weight:
9.9 oz (281 g)
Dimensions:
1.25 x 3.25 x 2.5 in, max. (not including connectors)
Operating Temperature:
-57°C to 87°C
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Req. DC Input V.:
3.3 VDC — 15 VDC
Current Draw:
36 mA, typical (40 mA, max.)
Gain:
29 dB — 31 dB (30 dB, typical)
Input SWR:
2.0:1
Output SWR:
2.0:1, max. (1.8:1, typical)
Noise Figure:
L1: 2.0 dB
L2: 4.25 dB
Band Gain Flatness:
0.5 dB, typical (1 dB, max.)
Group Delay:
L1: 1.5 ns
L2: 2.0 ns
Reverse Isolation:
L1: -55 dB
L2: -60 dB
Input P1dB:
L1: -21.5 dBm
L2: -23 dBm
3rd Order Intercept:
-13 dBm
Source Voltage Option:
9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector)
Source Option:
custom
Connector Option:
TNC type..
$679.00
28.5VDC/105AMP POWER SUPPLY-REGULAR SIZE 5310553105 Start Pac Aircraft Power Supply | 28.5VDC Output, 220V InputThe Start Pac model 53105 is designed to power up 24-volt aircraft systems and provides a continuous current up to 105-amps. The 28.5 volt output is designed to simulate the aircraft's power when operating on its own.Start Pac aircraft power supplies have been specifically designed for avionics maintenance to power up various functions such as inverters, avionics, and GPS programming/ equipment. Technicians can preform aircraft maintenance without using the aircraft's onboard battery thus preventing unnecessary wear and conserving aircraft power for startup purposes. The low VOC powder coating protects the Start Pac from wear and weather conditions. This Start Pac aircraft power supply (Alternate Part# 53105R) operations on 220-volt AC power and includes a 50ft, extension cable with a blank end. Compact, lightweight portable aircraft power supplyNo duty cycle – provides clean continuous powerMaximum current output: 28.5-volts @ 105-ampsResistant aluminum case with low VOC, durable powder-coat finishDesigned for heavy-duty usageOverload protectionProduct CodesMfr Part No:53105ECCN:5A991SCHEDULE B CODE:8504.40.9580Weight:
12 lb (5.4 kg)
Dimensions:
16 x 4-3/8 x 5-1/4 in (40 x 11.5 x 13.3 cm)
Continuous Current Output:
105A, max.
DC Voltage Output:
28.5 VDC
AC Voltage Input:
180 VAC — 240 VAC
AC Current Input:
14A @ 220 VAC, at maximum DC power output
Phase:
Single
Forced Air Cooling:
yes
Circuit Protection:
over-current, over-voltage, over-temperature..
$2,851.80
28.5VDC/25AMP POWER SUPPLY 53025/24V53025/24 Start Pac Light Aircraft Power Supply | 28.5VDC Output, 25A Current, 220V InputThe Start Pac model 53025/24 is designed to power up 24-volt aircraft systems and provides a continuous current up to 25-amps. The 28.5 volt output is designed to simulate the aircraft's power when operating on its own.Start Pac mini aircraft power supplies have been specifically designed for light avionics maintenance to power up various functions such as inverters, avionics, and GPS programming/ equipment. Technicians can preform aircraft maintenance without using the aircraft's onboard battery thus preventing unnecessary wear and conserving aircraft power for startup purposes. The low VOC powder coating protects the Start Pac from wear and weather conditions.This Start Pac aircraft power supply (Alternate Part# 53025/24) operations on 220-volt AC power and has a 50A/12-volt current output.Compact, lightweight portable aircraft power supplyNo duty cycle – provides clean continuous powerMaximum current output: 28.5-volts @ 25-ampsResistant aluminum case with low VOC, durable powder-coat finishDesigned for heavy-duty usageOverload protectionProduct CodesMfr Part No:53025/24VECCN:5A991SCHEDULE B CODE:8504.40.9580Weight:
7 lb (3 kg)
Dimensions:
11-3/4 x 5 x 4 in (30 x 13 x 10 cm)
Continuous Current Output:
25A, max.
DC Voltage Output:
28.5 VDC
AC Voltage Input:
90 VAC — 240 VAC
AC Current Input (max. DC output power):
7A @ 110 VAC
3.5 @ 220 VAC
Phase:
single
Forced Air-Cooling:
yes
Circuit Protection:
over-current, over-voltage, over-temperature..
$1,011.23