TEMPERATURE PROBES EGT Type K Thermocouple 1"-2" Clamp Style 2B21EGT Type K ThermocoupleDial Range:1"-2" Clamp StyleDial Markings and Colors:..

THE NOSE JOB 1 FOR RV NOSE GEAR (P/N: AAP163576). Landing gear or drive-gear component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AAP163576 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

THE NOSE JOB 2 FOR RV NOSE GEAR (P/N: AAP163577). Landing gear or drive-gear component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AAP163577 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

THERMOCOUPLE PROBE/For use with exhaust gas temperature gauge: 12-560-1K7 2B20TEMPERATURE PROBES EGT Type K Thermocouple 1 5/8"-2 1/2" Clamp Style (Lycoming) 2B20EGT Type K ThermocoupleDial Range:1 5/8"-2 1/2" Clamp StyleDial Markings and Colors:(Lycoming)..

TI1200 STATIC INVERTER (115 VAC/1200 VA) 6431200-1TI1200 DC-to-AC Interver | 115 VAC, 60 HzThe TI1200 DC-to-AC Inverter supplies 1200 watts to power multiple cabin accessories, galley equipment, and entertainment systems. It has a small and lightweight footprint and includes the same connector as legacy designs. The TI200 features overload and short-circuit protection up to 150% of its rated load.This TI1200 model (Alternate Part# TI1200): 1,200 watt, 115 VAC at 60 Hz output20 VDC – 36 VDC, 60A at 28 VDC inputFeatures: Supplies 1200 watts to power multiple cabin accessories, galley equipment, and entertainment systemsIdeal for use in emergency medical service, law enforcement, and VIP cabin configurationsCompact and lightweight designweights only 7.3 lb88% efficient operationInput transient, overload, and short-circuit protection for up to 150% of rated loadOptional remote On/OffDesigned and built in Wichita, Kansas, USAProduct CodesMfr Part No:6431200-1PROAPP:PT3738CE,PQ3738CE,OL2R061LRTCA:DO-160GSCHEDULE B CODE:8504400040SIN:334511TSO:C73Weight: 7.3 lb Dimensions: 12 x 6.32 x 3.46 in Input Voltage: 20 VDC – 36 VDC Input Current: 50A @ 28 VDC Output Voltage: 115 VAC ±3% Output Power: 1,200 VA Output Frequency: 60 Hz ±0.1% Output Waveform: Single phase, true sine wave, < 3% THD Altitude: 55,000 ft Humidity: Tested to greater than 95% for 10 days, temperature cycle of 75°F to 160°F Temperature: –65°F to 160°F (-55°C to 70°C) Integral Cooling: Dual, electronically-controlled brushless fans Mating Connector: MS3106A24-12S MS3057-16A (cable clamp/backshell) Case: Anodized aluminum extrusion, blue Certification: FAA TSO-C73 certified EASA ETSO-C73 certified RTCA DO-160G qualified..

TI2000 DC to AC INVERTER/20-36 VDC, 2000 Watts, 115 VAC, Single phase. Includes install kit. 6432000-1TI2000 DC-to-AC Inverter | 115 VAC, 60 HzThe TI2000 DC-to-AC Inverter provides 2,000 watts of power for cabin and galley accessories — including entertainment systems, person electronic devices, microwave ovens, and coffee makers. The TI2000 is capable of three-phase operation to produce 6,000 watts of power.This TI2000 model (Alternate Part# TI2000): Supplies 2000 watts at 115 VAC, 60 Hz output20 VDC – 36 VDC, 80A, 28 VDC inputFeature: Supplies 2,000 watts of wall outlet powerProvides 6,000 watts in three-phase operationIdeal for emergency medical equipment, special mission, and VIP cabin configurationslightweight — only 7.7 lb93% efficientInput transient, overload and short-circuit protection — up to 150% of rated load without damageOptional remote On/OffDesigned and built in Wichita, Kansas, USAProduct CodesMfr Part No:6432000-1ETSO:C73RTCA:DO-160GTSO:C73Weight: 7.7 lb Dimensions: 6.32 x 12 x 3.46 in Model Number: TI2000 Input Voltage: 20 VDC – 36 VDC Input Current: 80A at 28 VDC Output Voltage: 115 VAC ±3% Output Frequency: 60 Hz ±0.1% Output Power: 2,000 VA Output Waveform: Single phase, true sine wave, < 3% total harmonic distortion Altitude: 55,000 ft Humidity: Tested to greater than 95% for 10 days, temperature cycle of 75°F to 160°F Temperature: -67°F to 158°F (-55°C to 70°C) Mating Connector: P/N 9018784-1 P/N 9018550-2 (cable clamp / backshell) Case: Anodized aluminum extrusion, blue Certificate: FAA TSO-C73 certified EASA ETSO-C73 certified RTCA DO-160G qualified..

TIT Probe Only, clamp on JPI M111T. Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number JPI M111T against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

TIT Probe with Harness, JPI Option for EDM Series JPI TIT..

TNC MALE CONNECTOR CLAMP/Solder Attachment For RG213, RG214, RG8, RG9, RG11, RG225, RG393 PE4088TNC Male Connector | Straight, Clamp/SolderThe PE4088 TNC male connector features a clamp/solder attachment for RG213, RG214, RG8, RG9, RG11, RG225, RG393, RG144, RG215, and RG216 coaxial cable. The connector operates up to a maximum frequency of 11 GHz and offers VSWR of 1.3:1. This TNC connector has a brass body with nickel plating and uses brass contact.TNC male connectorMIL-STD-348A50Ω impedance11 GHz Max. operating frequencyVSWR 1.3:1Gold-plated brass contactProduct CodesMfr Part No:PE4088ECCN:ear99SCHEDULE B CODE:8536.69.4010Weight: 0.01 lb (45.36 g) Dimensions: 1.7 x 0.75 in (43.18 x 19.05 mm) Body Geometry: straight Connect Interface Types: RG213, RG214, RG8, RG9, RG11, RG225, RG393, RG144, RG215, RG216 Contacts: gold-plated brass contact Minimum Contact Plating: 30 µ-in..

TRU-RMS CLAMP METER/Provided with Calibration Certificate FLUKE 325Fluke 325 True RMS Clamp MeterThe Fluke 325 True-RMS Clamp Meter is a reliable, versatile troubleshooting tool for commercial and residential electricians, featuring True-RMS measurements, a slim design for easy transport and use, and a large display for efficient troubleshooting. This rugged True-RMS clamp meter with dc current and frequency measurements troubleshoots problems safely and accurately.Includes:Fluke 325 True-RMS Clamp Meter, TL75 Test Leads, Type K Thermocouple, Two AAA Batteries (Installed), Soft CaseFeatures:CAT III 600 V, CAT IV 300 V safety ratingProvides True RMS AC voltage and current for accurate measurements on non-linear signalsMeasures AC/DC current up to 400 AMeasures AC/DC voltage to 600VMeasures resistance to 40 kΩ with continuity detection ≤ 30ΩMeasures temperature from -10C to 400CMeasures capacitance to 1000µFMeasures frequency from 5Hz to 500HzMin/Max function records important valuesBacklight and hold function captures a reading on the displayProduct CodesMfr Part No:FLUKE 325Weight: 0.62 lb (283 g) Dimensions: 8.15 x 2.95 x 1.34 in. (207 x 75 x 34 mm) AC current: Range 40.00 A / 400.0 A Accuracy 2% ± 5 digits (45 Hz to 65 Hz), 2.5% ± 5 digits (65 Hz to 400 Hz) DC current: Range 40.00 A / 400.0 A Accuracy 2% ± 5 digits AC voltage: Range 600.0 V Accuracy 1.5% ± 5 digits DC voltage: Range 600.0 V Accuracy 1.0% ± 5 digits Resistance: Range 400.0 Ω / 4000 Ω / 40.00 kΩ Accuracy 1.0% ± 5 digits Continuity: ≤ 30 Ω Capacitance: 0 to 100.0 μF / 100μF to 1000 μF Frequency: 5.0 Hz to 500.0 Hz AC response: True-RMS..

TRUE RMS 2000 A CLAMP METER/58 mm jaw capacity, CAT IV 600 V, CAT III 1000 V safety rating, high voltage measurements, backlit display. FLUKE 355..

TRUE RMS 2000 A CLAMP METER/Provided with Calibration Certificate FLUKE-353Fluke 353 True RMS 2000A Clamp MeterConfidently take reliable readings with the Fluke 353 True RMS digital clamp meter. The Fluke 353 is the tool of choice for high current clamp-on amp meter measurement up to 2000A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads.Includes:FLUKE 353 clamp meter, C43 Soft carrying case, 6 AA batteries, and user manualFeatures:Reliably handle a wide range of high-current applications with 2000 A AC + DC true-rms, 1400 A ac, and 2000 A DCThe large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductorsCAT IV 600 V, CAT III 1000 V rating for added user protectionIn-rush current measurement captures ‘power-on’ surge current with accuracy and repeatabilityAccurately measure frequency up to 1 kHz for optimum troubleshootingQuickly analyze readings using the MIN, MAX, and AVG functionsA large backlit display allows for easy visibility in low-lit areasUse the display hold feature to capture readings even when the display cannot be viewedUse the low-pass filter to smooth out noisy loads and stabilize readingsProduct CodesMfr Part No:FLUKE-353Weight: 0.814 kg (1.8 lb) Jaw size: 58 mm (2.28 in) Dimensions: 300 x 98 x 52 mm (12 x 3.75 x 2 in) Batteries: Six 1.5 V AA NEDA 15 A or IEC LR6 Battery life: 100 hours (with typical usage, backlight off) Test leads: Rated to 1000 V Safety rating: IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III Operating temperature: 32°F to +122°F (0°C to +50°C) Storage temperature: -4°F to 140°F (-20°C to +60°C) Operating humidity: 0 to 95% (non-condensing) Operating altitude: 2000 m Storage altitude: 10,000 m IP rating: IP42 (indoor use only) Drop test requirements: 1 m EMI, RFI, EMC: FCC part 15, IEC/EN 61326-1:1997 class B IEC/EN 61326:1997 3V/m, performance criteria B, EN61325 Safety rating: IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III..

TRUE RMS AC/DC CLAMP METER with iFLEX/Provided with Calibration Certificate/CAT IV 600 V, CAT III 1000 V, min-max-average recording, inrush measurement technology, backlit display, three year warranty, includes soft carrying case. FLUKE-376-FCFluke 376 FC True-RMS AC/DC Clamp Meter with iFlexThe Fluke 376 FC is a True-RMS AC/DC clamp meter with an iFlex flexible current probe. This True-RMS multimeter logs measurements to pinpoint intermittent faults, wirelessly transmits measurements via the Fluke Connect app, creates and sends reports from the field, and takes measurements from safe distances using Bluetooth connectivity to Apple and Android devices.Includes:Fluke 376 FC True-RMS Clamp Meter with iFlex18-inch iFlex® Flexible Current ProbeTPAK magnetic hanging strapTL75 Test LeadsTwo AA batteries (Installed)Soft carrying caseCoated instruction cardSafety information sheetFeatures:Connects to a smartphone with the Fluke Connect AppMeasurements can be read at a safe distance using a smartphoneRecords measurements to a smartphone and to the cloudCaptures intermittent faults while performing other tasksCreate and share reports from the field via email, or converse in real-time with ShareLive video callsiFlex flexible current probe expands the measurement range to 2,500A AC and provides access to included large conductors in tight spacesIncludes TPAK magnetic hanging strapIntegrated VFD low-pass filter for accurate motor drive measurementsProprietary inrush measurement technology filters out noise and captures motor starting current exactly as the circuit protection sees itCAT IV 600 V, CAT III 1,000 V safety ratingProduct CodesMfr Part No:FLUKE-376-FCWeight: 395 g Dimensions: 249 x 85 x 45 mm Jaw opening: 34 mm Flexible current probe diameter: 7.5 mm Flexible current probe cable length: 1.8 m (head to electronics connector) Maximum voltage: 1000 V (between any terminal and earth ground) Batteries: 2 AA, NEDA 15A, IEC LR6 Operating temperature: -10 °C to +50 °C Storage temperature: -40 °C to +60 °C Operating humidity non-condensing (< 10°C): ≤90% RH (at 10 °C to 30 °C) ≤75% RH (at 30 °C to 40 °C) ≤45% RH (at 40 °C to 50 °C) Operating altitude: 2000 m Storage altitude: 12,000 m IP rating: IEC 60529: IP30, non-operating Radio Frequency Certification FCC ID: T68-FBLE IC:6627A-FBLE Resistance: Range: 60 kΩ Resolution: 0.1 Ω (≤600 Ω), 1 Ω (≤6000 Ω), 10 Ω (≤60 kΩ) Accuracy: 1% ±5 digits Capacitance: Range: 1000 μF Resolution: 0.1 μF (≤ 100 μF), 1 μ F (≤ 1000 μF) Accuracy: 1% ±4 digits Frequency via Flexible Current Probe Range: 5.0 Hz to 500.0 Hz Resolution:  0.1 Hz Accuracy:  0.5% ±5 digits Trigger level: 5 Hz to 20 Hz, ≥25 A, 20 Hz to 100 Hz, ≥20 A, 100 Hz to 500 Hz, ≥25 A Frequency via Jaw Range: 5.0 Hz to 500.0 Hz Resolution:  0.1 Hz Accuracy:  0.5% ±5 digits Trigger level: 5 Hz to 10 Hz, ≥10 A, 10 Hz to 100 Hz, ≥5 A, 100 Hz to 500 Hz, ≥10 A DC Current Range: 999.9 A Resolution: 0.1 A Accuracy: 2% ±5 digits DC Voltage Range: 1000 V Resolution: 0.1 V (≤600.0 V), 1 V (≤1000 V) Accuracy: 1% ±5 digits AC Voltage Range: 1000 V Resolution: 0.1 V (≤600.0 V), 1 V (≤1000 V) Accuracy: 1.5% ±5 digits (20 Hz to 500 Hz) AC Current via Jaw Range: 999.9 A Resolution: 0.1 A Accuracy: 2% ±5 digits (10 Hz to 100 Hz), 2.5% ±5 digits (100-500 Hz) Crest Factor (50 Hz/60 Hz): 3 @ 500 A, 2.5 @ 600 A, Add 2% for C.F. >2 AC Current via Flexible Current Probe Range: 2500 A Resolution: 0.1 A (≤ 600 A), 1 A (≤ 2500 A) Accuracy: 3% ±5 digits (5 – 500 Hz) Crest Factor (50/60Hz): 3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, Add 2% for C.F. > 2..

TRUE RMS CLAMP METER WITH CALIBRATION (P/N: FLUKE-374). Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number FLUKE-374 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

TRUE RMS CLAMP METER/400 A AC current measurement, 600 V AC/DC measurement, CAT IV 300V/CAT II 600 V safety rating, includes two year warranty and soft carrying case. FLUKE-323Fluke 323 True RMS Clamp MeterThe Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. It's designed to perform in the toughest environments and provide noise-free, reliable results.Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.Includes:Test leads, soft case, and user's manualFeatures:Slim, ergonomic design for measuring in tight cable compartmentsPresents measurements on a large, easy-to-read displayRugged, reliable basic True-RMS clamp meter for measuring current up to 400 AMeasures AC current to 400 AMeasures AC voltage and DC voltage to 600 VProvides True RMS AC voltage and current for accurate measurements on non-linear signalsMeasures resistance to 4 kΩ with continuity detectionHold function captures a reading on the displayFeatures a CAT III 600 V, CAT IV 300 V safety ratingProduct CodesMfr Part No:FLUKE-323ECCN:3A992SCHEDULE B CODE:9030.31.0000Weight: 265 g Dimensions: 207 x 75 x 34 mm Max wire diameter: 30 mm (600 MCM) AC current: Range: 400.0 A Accuracy: 2% ± 5 digits (45 Hz to 65 Hz) / 2.5% ± 5 digits (65 Hz to 400 Hz) AC voltage: Range: 600.0 V Accuracy: 1.5% ± 5 digits DC voltage: Range: 600.0 V Accuracy: 1.0% ± 5 digits Resistance: Range: 400.0 Ω/ 4000 Ω Accuracy: 1.0% ± 5 digits Continuity: ≤ 70 Ω Category rating: CAT III 600 V CAT IV 300 V Warranty: Two-year..

TRUE RMS HVAC CLAMP METER/Backlit display, auto shut-off, three year warranty. FLUKE 902..

TRUE-RMS AC/DC CLAMP METER FLUKE 365. Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number FLUKE 365 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

TURTLE BEACH VELOCITYONE FLIGHT SIMULATOR UNIVERSAL CONTROL YOKE AND THROTTLE SYSTEM..

Type-K EGT Thermocouple, Clamp Type, 1.5 inch & Up, Experimental MGL EGT CLAMP..

Type-K EGT Thermocouple, Clamp Type, Up to 1.5 inch, Experimental MGL EGT CLAMP-SM..

Type-K EGT Thermocouple, M8 x1 Thread, Experimental MGL EGT..

UMA 1-1/4 SINGLE EGT GAUGE (2700 SWEEP) - NON TSO N12117K1K7F000..

UMA 2-1/4 SINGLE EGT GAUGE (2700 SWEEP) - NON TSO 1..

UNHEATED PITOT TUBES STRAIGHT TYPE PITOT-STATIC TUBE 15150..

UNHEATED PITOT TUBES STRUT TYPE PITOT-STATIC TUBE 15155..