AIRCRAFT JACKING SOLUTIONS NOSE GEAR T STAND 4360-5..

Airframe Structures Aviation Maintenance Technician Book ASA AMT-STRUC..

Airframe Systems Aviation Maintenance Technician Book ASA AMT-SYS..

AIRWAY MANUAL ACCESSORY PACK 10011316-000Airway Manual Accessory PackThe Airway Manual accessory pack contains everything pilots need to keep their charts and flight planning gear organized. Included in this kit are chartabs (set of 3), approach chart protector sleeves (set of 10), NavLog/Flight plan forms (set of 50), multitabs (set of 13), lined pilot notes (set of 25). Accessory pack includes:Chartabs (set of 3)Approach chart protector sleeves (set of 10)NavLog/Flight plan forms (set of 50)Multitabs (set of 13)Lined pilot notes (set of 25)Product CodesMfr Part No:10011316-000ECCN:EAR99SCHEDULE B CODE:4901.90.0020 ..

ALTERNATOR ASM- GEAR DRIVE 633962. Landing gear or drive-gear component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 633962 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ALTITUDE MANAGEMENT SYSTEM (AMS) 918900-01AMS-2000 Altitude Management System (AMS)The AMS 2000 is an Altitude Management and Alert System. It alerts when approaching or deviating from the target altitude. Other features include alerts when reaching the Decision Height or Minimum Descent Altitude, and a landing gear reminder when approaching the destination altitude. The AMS 2000 also will calculate density altitude and engine performance.Time based altitude alertingDensity altitude displayReal-time IVS display100 ft increment displayProduct CodesMfr Part No:918900-01ECCN:7A994SCHEDULE B CODE:8803.30.0010Weight: 9 oz Dimensions: 1.5x 3.125 x 5.75 in. Power: 10 to 28 VDC 300 mA max Altitude display range: -1000 feet to upper limit of encoder Resolution: 100 feet (10 feet with serial Encoder)..

ANTENNA/L Band blade, 4 hole mount, C connector, glossy Red DMNI50-2-6DM NI50 DME/ATC L-Band Antenna | 960MHz – 1,220MHz, Type C Male Connector, Glossy RedThe DM NI50 reduces maintenance costs due to its low profile, all-metal blade that provides unequalled mechanical strength and reliability. The NI50 antennas are engineered for use on business, commercial, and military aircraft. NI50 DME antennas can be used will all standard L-Band equipment operating on the 960 MHz to 1,220 MHz frequency band. These antennas are interchangeable with with virtually all L-band blade, flush mountable antennas currently in service on commercial and military aircraft. This DM NI50 DME/ATC antenna (Alternate Part# DMNI50-2-6) has a type C male connector, and a four-hole mounting pattern, and is painted glossy red.Extremely high side load strength guards against breakage by ground handling gearCompletely sealed construction prevents moisture intrusionLightning protection circuits safeguard electronic equipmentLow-profile, all- metal blade antennaDirect current ground designInterchangeable with most L-band blade and flush mount antennasMultiple color and connector configurations availableProduct CodesMfr Part No:DMNI50-2-6Weight: 4 oz Height: 2.2 in Frequency Range: 960 MHz – 1,220 MHz VSWR: < 1.7:1 (960 MHz – 1,220 MHz) < 1.5:1 (1,000 MHz – 1,100 MHz) Gain: 0 dB, average @ horizon Impedance: RF: 50Ω DC: short circuit Polarization: vertical Radiation Pattern: hemispherical Power Handling: 3kW (peak), 100 watts (average) ENVIRONMENTAL: Aerodynamic Drag (@ sea level): 2 oz (mach 0.5) 4.5 oz (mach 0.8) Side Load: TSO C34c ARINC: 532 E (ATC transponder) 521 D (DME) FAA: TSO-C74 (ATC transponder) TSO-C66a (DME)..

ANTI-SEIZE GREASE PINT PTI-ASG-PT. Aircraft pin or fastener pin. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number PTI-ASG-PT against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Apprentice STS 1.5m BNF Basic Smart Trainer with SAFE EFL 3750..

Apprentice STS 1.5m RTF Smart Trainer with DXS EFL 37000..

APU CHARGER/ 14VDC, 100Amps, 220Vac 60Hz with Piper and Cessna Plugs , 50FT Cord P-14100/2P 50FT CORDAuxiliary Power Unit | 14V, 100A, 220V, 60Hz, Piper & Cessna PlugsThe P-14100 APU provides the amps necessary for gear retraction tests as well as the filtered power for all types of avionics service. The P-14100 supplies up to 100 amps at 14 VDC for commercial aircrafts. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes.Version (Alternate Part# P14100/2P) is designed as a power supply only unit with 14 volt output, 100 amps, 220 volt input, 60Hz frequency, and Includes Piper & Cessna plugs.100 amperes filtered 14 volt supplyAircraft APU connectors furnishedOperates from 220 VAC, 60 Hz50ft Piper & Cessna plugsFerro-resonant regulated supplyDC current limitedFront panel meter, controlsPortable, weighs only 61 lbExtensive testing by FBO'sProduct CodesMfr Part No:P-14100/2P 50FT CORDWeight: 61 lb Dimensions: 13 x 9 x 10 in. Input voltage: 220VAC AC input amperage: 17.5A Input frequency: 60Hz Output voltage: 14VDC DC output amperage: 100A Output wattage: 1400W..

APU CHARGER/ 28VDC, 100Amps, 220Vac 60Hz with Piper and Cessna Plugs , 50FT Cord P-28100/P 50 FT CORDAuxiliary Power Supply | 28V, 100A, 220V, 60Hz, Piper & Cessna PlugsThe P-28100 APU provides the amps necessary for gear retraction tests as well as the filtered power for all types of avionics service. The P-28100 supplies up to 100 amps at 28 VDC for commercial aircrafts. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes.Version (Alternate Part# P28100P) is designed as a power supply only unit with 28 volt output, 100 amps, 220 volt input, 60Hz frequency, and Includes Piper & Cessna plugs.50ft Piper and Cessna plug connector100 amperes filtered 28 volt supplyOperates from 220 VAC, 60 Hz8 foot DC cable furnishedFerro-resonant regulated supplyDC current limitedFront panel meter, controlsPortable, weighs only 64 lbExtensive testing by FBO'sProduct CodesMfr Part No:P-28100/P 50 FT CORDWeight: 62 lb Dimensions: 13 x 9 x 10 in. Input voltage: 220VAC AC input amperage: 35A Input frequency: 60Hz Output voltage: 28VDC DC output amperage: 100A Output wattage: 2800W..

APU CHARGER/28 VDC, 100 AMP, 110 VAC, 60 Hz, Dual Meters (Voltmeter & Ammeter) P-28100/1SDual Meter Auxiliary Power Supply | 28V, 100A, 110V/60Hz, Cessna PlugThe P-28100 APU provides the amps necessary for gear retraction tests as well as the filtered power for all types of avionics service. The P-28100 supplies up to 100 amps at 28 VDC for commercial aircrafts. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes.Version (Alternate Part# P-28100/1S) is designed as a power supply only unit with 28 volt output, 100 amps, 110 volt input, 60Hz frequency, and has dual meters (voltmeter & ammeter). Includes Cessna plug.VoltmeterAmmeter100 amperes filtered 28 volt supplyAircraft APU connectors furnishedOperates from 110 VAC, 60 Hz8 foot DC cable furnishedFerro-resonant regulated supplyDC current limitedFront panel meter, controlsPortable, weighs only 62 lbExtensive testing by FBO'sProduct CodesMfr Part No:P-28100/1SWeight: 62 lb Dimensions: 13 x 9 x 10 in. Input voltage: 110VAC AC input amperage: 35A Input frequency: 60Hz Output voltage: 28VDC DC output amperage: 100A Output wattage: 2800W..

APU CHARGER/Eclipse, 28 VDC, 100 AMP, 110 VAC, 60 Hz P-28100ECLPS-28100 Series Aircraft Ramp Power Supply | 28VDC, 100A, 120VAC, 60Hz, EclipseThe Bycan PS-28100 Aircraft Ramp Power Supply is an aircraft flight line service and maintenance tool. The APU unit has a filtered 28 volt DC power supply with up to 100 amperes capability for tests of aircraft electrical systems. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version PS-28100ECL operates on 120VAC, 60Hz, 100A, designed for Eclipse E-500 aircraft.100 amperes filtered 28 volt supplyPlugs directly to aircraft APU connectorActivated by electrical system master switchAircraft APU connectors furnishedFront panel meteringOperates from 120 VAC, 60 HzDC current limited8 foot DC cable furnishedPortableFerro-resonant regulated supplyProduct CodesMfr Part No:P-28100ECLECCN:EAR99SCHEDULE B CODE:8504.40Weight: 62 lb Dimensions: 13 x 9 x 10 in. Input voltage: 120VAC AC input amperage: 35A Input frequency: 60Hz Output voltage: 28VDC DC output amperage: 100A Output wattage: 2800W..

APU CHARGER/European and Piper plug, 28 VDC, 50 AMP, 230 VAC, 50 Hz P-2850EPAPU/CHARGER/PIPER/28V/50AThe Bycan PS-2850 Aircraft Ramp Power Supply and Battery Charger is a dual-purpose aircraft flight line service and maintenance tool. The unit has a filtered 28 volt DC power supply with up to 50 amperes capability for tests of aircraft electrical systems and a secondary mode for recharging run-down batteries. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service. The PS-2850 plugs directly into the aircraft APU connector and is tied to the electrical system when the master switch is activated. The battery charging mode is selectable by a front panel switch. The charging process is fully automatic. When the charge is in progress a red LED is illuminated. This is replaced by a green LED when the aircraft battery is fully charged. The on/off switch on the unit also resets the unit. The 14 volt version, PS-1450 provides 50 amperes of filtered DC at 14 volts. FEATURES 50 amperes filtered 28 volt supply Aircraft APU connectors furnished Operates from 115 VAC, 60 Hz AC circuit breaker included 7 foot DC cable furnished Weighs only 30 pounds. Portable Ferro-resonant regulated supply One year warranty Extensive testing by FBO's Product CodesMfr Part No:P-2850EPECCN:EAR99SCHEDULE B CODE:8504.40..

APU CHARGER/Piper plug, 28 VDC, 50 AMP P-2850PPS-2850 Series APU & Battery Charger | 50A, 28VDC, 115V, 60Hz, PiperThe PS-2850 Aircraft Ramp Power Supply and Battery Charger is a dual-purpose aircraft flight line service and maintenance tool. The unit has a filtered 28 volt DC power supply with up to 50 amperes capability for tests of aircraft electrical systems and a secondary mode for recharging run-down batteries. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version PS-2850P is designed as a power supply and battery charger unit with a 60Hz frequency, 115V, 50A, and includes the Piper coaxial connector.50 amperes filtered 28 volt supplyPlugs directly to aircraft APU connectorActivated by electrical system master switchAircraft APU connectors furnishedFront panel switching functionalityLED charging status indicatorFully automatic charging processOn/off switch on the unit also resets the unitOperates from 115 VAC, 60 HzAC circuit breaker included7 foot DC cable furnishedPortableFerro-resonant regulated supplyProduct CodesMfr Part No:P-2850PECCN:EAR99SCHEDULE B CODE:8504.40Weight: 45 lb Dimensions: 12 x 8 x 9 in. Input voltage: 115VAC AC input amperage: 18A Input frequency: 60Hz Output voltage: 28VDC DC output amperage: 50A Output wattage: 1400W..

APU RED BARON/14 VDC, 28 VDC, 25 AMP R-14/28-25RB-14/28-25 Series APU | 25A, 14/28VDC, 115V, 60HzThe RB-14/28-25 Series Aircraft Ramp Power Supply is an aircraft flight line service and maintenance tool. The APU unit has a filtered 14 or 28 volt DC power supply with an amperage capability up to 25 amperes for testing of aircraft electrical systems. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version R-14/28-25 is designed as a power supply only unit with a 60Hz frequency.Voltage is filtered to eliminate hum and is regulated against input AC line voltage changesOutput DC voltage and current are displayed on front panel metersDC voltage is also protected by a circuit breakerSelection of output voltage by front panel switch which is protected by a switch guardClosing the guard forces the switch to the 14 volt positionPlugs directly into the APU receptacle on the aircraftAC/DC cable length is 8' eachSteel housingRubber feet and handleProduct CodesMfr Part No:R-14/28-25ECCN:EAR99SCHEDULE B CODE:8504.40.9530Weight: 32 lb Dimensions: 8 x 10 x 10 in. Input voltage: 115 VAC AC input amperage: 4.5/9 A Input frequency: 60Hz Output voltage: 14/28 VDC DC output amperage: 25A Output wattage: 350/700 W..

APU RED BARON/European and Piper plug, 14 VDC, 28 VDC, 25 AMP, 230 VAC, 50 Hz R-14/28-25EPRB-14/28-25 Series APU | 25A, 14/28VDC, 50Hz, 220V, PiperThe RB-14/28-25 Series Aircraft Ramp Power Supply is an aircraft flight line service and maintenance tool. The APU unit has a filtered 14 or 28 volt DC power supply with an amperage capability up to 25 amperes for testing of aircraft electrical systems. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version R-14/28-25EP is designed as a power supply only unit with a 50Hz frequency, 220V, 25A, and includes the Piper coaxial connector.50 amperes filtered 14 volt supplyPlugs directly to aircraft APU connectorActivated by electrical system master switchAircraft APU connectors furnishedFront panel switching functionalityLED charging status indicatorFully automatic charging processOn/off switch on the unit also resets the unitOperates from 220 VAC, 50 HzAC circuit breaker included7 foot DC cable furnishedPortableFerro-resonant regulated supplyProduct CodesMfr Part No:R-14/28-25EPECCN:EAR99SCHEDULE B CODE:8504.40.9530Weight: 38 lb Dimensions: 12 x 8 x 9 in. Input voltage: 220VAC AC input amperage: 9A Input frequency: 50Hz Output voltage: 14VDC DC output amperage: 50A Output wattage: 700W..

APU RED BARON/European, 14 VDC, 28 VDC, 25 AMP, 230 VAC, 50 Hz R-14/28-25ERB-14/28-25 Series APU | 25A, 14/28VDC, 50Hz, 220VThe RB-14/28-25 Series Aircraft Ramp Power Supply is an aircraft flight line service and maintenance tool. The APU unit has a filtered 14 or 28 volt DC power supply with an amperage capability up to 25 amperes for testing of aircraft electrical systems. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version R-14/28-25E is designed as a power supply only unit with a 50Hz frequency and 220VAC.Voltage is filtered to eliminate hum and is regulated against input AC line voltage changesOutput DC voltage and current are displayed on front panel metersDC voltage is also protected by a circuit breakerSelection of output voltage by front panel switch which is protected by a switch guardClosing the guard forces the switch to the 14 volt positionPlugs directly into the APU receptacle on the aircraftAC/DC cable length is 8' eachSteel housingRubber feet and handleProduct CodesMfr Part No:R-14/28-25EECCN:EAR99SCHEDULE B CODE:8504.40Weight: 32 lb Dimensions: 8 x 10 x 10 in. Input voltage: 220 VAC AC input amperage: 4.5/9 A Input frequency: 50Hz Output voltage: 14/28 VDC DC output amperage: 25A Output wattage: 350/700 W..

APU RED BARON/Piper plug, 14 VDC, 28 VDC, 25 AMP. Includes: standard Piper coaxial connector and standard 3 prong connector. R-14/28-25PRB-14/28-25 Series APU | 25A, 14/28VDC, 60Hz, PiperThe RB-14/28-25 Series Aircraft Ramp Power Supply is an aircraft flight line service and maintenance tool. The APU unit has a filtered 14 or 28 volt DC power supply with an amperage capability up to 25 amperes for testing of aircraft electrical systems. This ramp or hangar accessory is an absolute must for avionics service, gear and flap actuator exercising and other electrical system service.Version R-14/28-25P is designed as a power supply only unit with a 60Hz frequency and also includes the Piper coaxial connector.Voltage is filtered to eliminate hum and is regulated against input AC line voltage changesOutput DC voltage and current are displayed on front panel metersDC voltage is also protected by a circuit breakerSelection of output voltage by front panel switch which is protected by a switch guardClosing the guard forces the switch to the 14 volt positionPlugs directly into the APU receptacle on the aircraftAC/DC cable length is 8' eachSteel housingRubber feet and handleProduct CodesMfr Part No:R-14/28-25PECCN:EAR99SCHEDULE B CODE:8504.40Weight: 32 lb Dimensions: 8 x 10 x 10 in. Input voltage: 115 VAC AC input amperage: 4.5/9 A Input frequency: 60Hz Output voltage: 14/28 VDC DC output amperage: 25A Output wattage: 350/700 W..

ARTEX 345 PILOT KIT 2259.1. FAA-approved aircraft parts kit. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 2259.1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ASA AIR CLASSICS PILOT BAG ASA-BAG-PILOT-1. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ASA-BAG-PILOT-1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ASA AIRCLASSICS FLIGHT BAG ASA-BAG-FLT-2. Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ASA-BAG-FLT-2 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ASA AIRCLASSICS PRO FLIGHT BAG ASA-BAG-PRO-2. Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ASA-BAG-PRO-2 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ASA AVIATOR TRIP FLIGHT BAG ASA-BAG-TRIP-1. Aircraft lighting component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ASA-BAG-TRIP-1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...