Kannad Integra Easy ELT With Rod Antenna USA 1002808..

KNIPEX PLIERS WRENCH - COMFORT GRIP 6 inch 86 05 150..

KNIPEX PLIERS WRENCH 6 inch 86 03 150 SBA. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 86 03 150 SBA against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Large Professional Series Air Tank, 700 ml (43ci) JMP 700..

Large UAT, 8.8 oz Air Trap V2, Horizontal Mount, 1/8 inch Fittings with Single Outlet JMP AT-LH..

Large UAT, 8.8 oz Air Trap V2, Vertical Mount, 1/8 inch Fittings with Single Outlet JMP AT-LV..

LIGHTWEIGHT IN EAR HEADSET/ For use with AIRBUS, Noise reduction, noise cancelling electret mic, 30dB noise reduction, music input, dual volume control. 3 year warranty FARO-AIR-ABUSFaro™ Air In-Ear Headset | Air Bus XLR-5 ConnectorThe Faro™ In-Ear headset is extremely lightweight — weighing only 1 oz — and provides 30 dB of noise reduction using slow-recovery composite foam ear tips. The ear plugs are slightly longer fitting deeper into the ear canal to create an effective seal that exerts low pressure within the ear. Premium features also include speakers rated at 280Ω, a noise cancelling electret microphone, replaceable foam ear tips, and padded ear hooks for a secure and comfortable fit. This Faro Air headset (Alternate Part# FAROAIRBUS) has an Air Bus XLR-5 Connector.Lightweight — weighing only 1 ozProvides over 30 dB passive noise reductionAuxiliary audio inputDual volume controlMono/Stereo switchReplaceable foam ear plugsProduct CodesMfr Part No:FARO-AIR-ABUSECCN:EAR99SCHEDULE B CODE:8518.30.2000Weight: 1 oz Connector: Air Bus XLR-5 Connector (Alternate Part# FAROAIRBUS) Operating Temperature: -4°F to 94°F (-20°C to 70°C) Storage Temperature: -31°F to 167°F (-35°C to 75°C) Cord Length: 150 cm Headphone: Type: dynamic Frequency response: 50 Hz – 20 kHz Sensitive: 95 ±5 dB SPL Microphone & Amplifier: Type: Noise canceling electret Frequency response: 100 Hz to 5 kHz Matching Impedance: 150Ω – 1,000Ω Sensitivity: -33 ±4 dB..

Loctite Aviation Gasket Sealant Liquid LOC 30516. Aviation aftermarket seal or gasket. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number LOC 30516 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Low Pressure Hose, 0.125 in ID AQ 306-2. Fluid hose or line component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AQ 306-2 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Low Pressure Hose, 0.250 in ID AQ 306-4. Fluid hose or line component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AQ 306-4 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Low Pressure Hose, 0.375 in ID AQ 306-6. Fluid hose or line component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AQ 306-6 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Low Pressure Hose, 0.500 in ID AQ 306-8. Fluid hose or line component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AQ 306-8 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Low Pressure Hose, 0.625 in ID AQ 306-10. Fluid hose or line component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AQ 306-10 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Lubricap Grease Fitting Cover, Dozen MS M-24529-DOZ..

LW-12056 LYCOMING SPACER - OIL PRESSURE FITTING LW-12056..

LW-14170 LYCOMING FITTING-ELBOW PIPE TO HOSE 45 LW-14170..

Male Branch Tee Tube Fitting, 1/4 inch tube to 1/8 inch NPT IE 272N-04X02..

MALE BRANCH TEE/BRASS/ Tube to Male Pipe Thread to Tube , 1/4 inch tube outside diameter, 1/8 inch pipe thread. 272P04X02Poly-Type Brass Male Branch Tee | Fits 1/4in Tubing, 1/8in Pipe ThreadPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing. This Brass Male Branch Tee fitting (Alternate Part# 272P04X02) couples together Poly-Type, PVC, EVA, lmpolene, nylon, and soft metal tubing with an outside diameter of 1/4 inch and has a 1/8-inch pipe thread.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:272P04X02ECCN:EAR99SCHEDULE B CODE:7419.91.0050Tube Size: 1/4 in (272P04X02) Pipe Thread: 1/8 in Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves; Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..

MALE BRANCH TEE/BRASS/ Tube to Male Pipe Thread to Tube , 3/8 inch tube outside diameter, 1/8 inch pipe thread. 272P06X02Poly-Type Brass Male Branch Tee | Fits 3/8in Tubing, 1/8in Pipe ThreadPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing. This Brass Male Branch Tee fitting (Alternate Part# 272P06X02) couples together Poly-Type, PVC, EVA, lmpolene, nylon, and soft metal tubing with an outside diameter of 3/8 inch and has a 1/8-inch pipe thread.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:272P06X02ECCN:EAR99SCHEDULE B CODE:7419.91.0050Tube Size: 3/8 in (272P06X02) Pipe Thread: 1/8 in Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves; Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyalomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..

MALE BRANCH TEE/NYLON/ Tube to Tube to Male Pipe Thread, 1/4 inch tube outside diameter, 1/4 inch pipe thread. 272N04X04NYLO-Seal Male Branch Tee | Fits 1/4in Tubing, 1/4in Pipe ThreadNYLO-Seal Nylon Male Branch Tees have excellent resistance to acids, alkalis, dilute mineral acids, most organic acids, petroleum oils and greases, and photographic solutions. Installation time is reduced with NYLO-Seal fittings when compared to regular compression or flare fittings. Also, stress on the tubing is relieved during installation as the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensures reliability. NYLO-Seal Nut & Sleeves are made of molded nylon to be strong and resistant to abuse, and the acetal copolymer sleeves provide maximum performance. They can continuously operate at temperatures of 200°F and intermittently at temperature as high as 250°F. NYLO-Seal fittings are excellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applications.This NYLO-Seal male branch tee (Alternate Part# 272N04X04) fits 1/4-inch tubing and has a 1/4-inch pipe thread.Excellent resistance to chemicalsReduces installation timeEliminates stress on plastic tubing during installationExceptionally strong and resistant to abuseContinual Operation at temperatures as high as 200°FCouples most types of thermoplastic tubingExcellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applicationsProduct CodesMfr Part No:272N04X04ECCN:EAR99SCHEDULE B CODE:3926.90.9887Type: Tube to Tube to Male Pipe Thread Tube Size: 1/4 in O.D. (272N04X04) Pipe Thread: 1/4 in Maximum Working Pressure: 250 PSI Materials: Molded Nylon Bodies and Nuts. Acetal Copolymer Sleeves (Celcon®) Compatible Tubing: NYLO-SEAL fittings can be used to couple to most types of thermoplastic tubing..

MALE BRANCH TEE/NYLON/ Tube to Tube to Male Pipe Thread, 1/4 inch tube outside diameter, 1/8 inch pipe thread. 272N04X02NYLO-Seal Male Branch Tee | Fits 1/4in Tubing, 1/8in Pipe ThreadNYLO-Seal Nylon Male Branch Tees have excellent resistance to acids, alkalis, dilute mineral acids, most organic acids, petroleum oils and greases, and photographic solutions. Installation time is reduced with NYLO-Seal fittings when compared to regular compression or flare fittings. Also, stress on the tubing is relieved during installation as the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensures reliability. NYLO-Seal Nut & Sleeves are made of molded nylon to be strong and resistant to abuse, and the acetal copolymer sleeves provide maximum performance. They can continuously operate at temperatures of 200°F and intermittently at temperature as high as 250°F. NYLO-Seal fittings are excellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applications.This NYLO-Seal male branch tee (Alternate Part# 272N04X02) fits 1/4-inch tubing and has a 1/8-inch pipe thread.Excellent resistance to chemicalsReduces installation timeEliminates stress on plastic tubing during installationExceptionally strong and resistant to abuseContinual Operation at temperatures as high as 200°FCouples most types of thermoplastic tubingExcellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applicationsProduct CodesMfr Part No:272N04X02ECCN:EAR99SCHEDULE B CODE:3926.90.9887Type: Tube to Tube to Male Pipe Thread Tube Size: 1/4 in O.D. (272N04X02) Pipe Thread: 1/8 in Maximum Working Pressure: 250 PSI Materials: Molded Nylon Bodies and Nuts. Acetal Copolymer Sleeves (Celcon®) Compatible Tubing: NYLO-SEAL fittings can be used to couple to most types of thermoplastic tubing..

MALE BRANCH TEE/NYLON/ Tube to Tube to Male Pipe Thread, 3/8 inch tube outside diameter, 1/8 inch pipe thread. 272N06X04NYLO-Seal Male Branch Tee | Fits 3/8in Tubing, 1/4in Pipe ThreadNYLO-Seal Nylon Male Branch Tees have excellent resistance to acids, alkalis, dilute mineral acids, most organic acids, petroleum oils and greases, and photographic solutions. Installation time is reduced with NYLO-Seal fittings when compared to regular compression or flare fittings. Also, stress on the tubing is relieved during installation as the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensures reliability. NYLO-Seal Nut & Sleeves are made of molded nylon to be strong and resistant to abuse, and the acetal copolymer sleeves provide maximum performance. They can continuously operate at temperatures of 200°F and intermittently at temperature as high as 250°F. NYLO-Seal fittings are excellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applications. This NYLO-Seal male branch tee (Alternate Part# 272N06X04) fits 3/8-inch tubing and has a 1/4-inch pipe thread.Excellent resistance to chemicalsReduces installation timeEliminates stress on plastic tubing during installationExceptionally strong and resistant to abuseContinual Operation at temperatures as high as 200°FCouples most types of thermoplastic tubingExcellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applicationsProduct CodesMfr Part No:272N06X04SCHEDULE B CODE:8803.90.9010Type: Tube to Tube to Male Pipe Thread Tube Size: 3/8 in O.D. (272N06X04) Pipe Thread: 1/4 in Maximum Working Pressure: 250 PSI Materials: Molded Nylon Bodies and Nuts. Acetal Copolymer Sleeves (Celcon®) Compatible Tubing: NYLO-SEAL fittings can be used to couple to most types of thermoplastic tubing..

MALE BRANCH TEE/NYLON/ Tube to Tube to Male Pipe Thread, 3/8 inch tube outside diameter, 3/8 inch pipe thread. 272N06X06NYLO-Seal Male Branch Tee | Fits 3/8in Tubing, 3/8in Pipe ThreadNYLO-Seal Nylon Male Branch Tees have excellent resistance to acids, alkalis, dilute mineral acids, most organic acids, petroleum oils and greases, and photographic solutions. Installation time is reduced with NYLO-Seal fittings when compared to regular compression or flare fittings. Also, stress on the tubing is relieved during installation as the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensures reliability. NYLO-Seal Nut & Sleeves are made of molded nylon to be strong and resistant to abuse, and the acetal copolymer sleeves provide maximum performance. They can continuously operate at temperatures of 200°F and intermittently at temperature as high as 250°F. NYLO-Seal fittings are excellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applications. This NYLO-Seal male branch tee (Alternate Part# 272N06X06) fits 3/8-inch tubing and has a 3/8-inch pipe thread.Excellent resistance to chemicalsReduces installation timeEliminates stress on plastic tubing during installationExceptionally strong and resistant to abuseContinual Operation at temperatures as high as 200°FCouples most types of thermoplastic tubingExcellent for instrument, lubricant, air, hydrocarbon fuel, oil coolant, low pressure hydraulic lines, laboratory, and chemical applicationsProduct CodesMfr Part No:272N06X06Type: Tube to Tube to Male Pipe Thread Tube Size: 3/8 in O.D. (272N06X06) Pipe Thread: 3.8 in Maximum Working Pressure: 250 PSI Materials: Molded Nylon Bodies and Nuts. Acetal Copolymer Sleeves (Celcon®) Compatible Tubing: NYLO-SEAL fittings can be used to couple to most types of thermoplastic tubing..

MALE CONNECTOR/BRASS/Tube to Male Pipe Thread , 1/4 inch tube outside diameter, 1/8 inch pipe thread. 268P04X02Poly-Type Brass Male Connector | Fits 1/4in Tubing, 1/8in Pipe ThreadPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing.This flareless brass male connector fitting (Alternate Part# 268P04X02) couples together Poly-Type, PVC, EVA, lmpolene, nylon, and soft metal tubing with an outside diameter of 1/4 inch and has a 1/8-inch pipe thread.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:268P04X02ECCN:EAR99SCHEDULE B CODE:7419.91.0050Tube Size: 1/4 in (268P04X02) Pipe Thread: 1/8 in Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves; Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..

MALE CONNECTOR/BRASS/Tube to Male Pipe Thread , 3/8 inch tube outside diameter, 1/8 inch pipe thread. 268P06X04Poly-Type Brass Male Connector | Fits 3/8in Tubing, 1/4in Pipe ThreadPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing. This flareless brass male connector fitting (Alternate Part# 268P06X04) couples together Poly-Type, PVC, EVA, lmpolene, nylon, and soft metal tubing with an outside diameter of 3/8 inch and has a 1/4-inch pipe thread.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:268P06X04ECCN:EAR99SCHEDULE B CODE:3926.90.9887Tube Size: 3/8 in (268P06X04) Pipe Thread: 1/4 in Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves;Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..