IC OPC515L..

10ft POWER CABLE FROM DC POWER SOURCE TO AMPLIFIED SPEAKER ARRAY ( OR PSAMP600N OR PSAMP1200N) PSCBL-DC-10..

136-174MHz, NO DISPLAY, 8 CHANNELS F5011 51F5011 VHF Transceiver | 136-174 MHz, No Display, 8 ChannelsThe F5011 is a versatile, VHF Transceiver is designed with rugged construction and simple operation. This radio has four programmable buttons and eight channels communication with 2-tone, 5-tone, MDC 1200, CTCSS, and DTCS capabilities as standard to set up customized talk zones. A priority scan mode allows users to monitor one or two priority channels while scanning other channels. The F5011 series built military rugged and tested to MIL-STD 810 F specifications to survive harsh environments and keep on working.This F5011 VHF Transmitter (Alternate Part# F5011 51) has no display, 8-channels, and 136 MHz - 174 MHz frequency coverage. Simple operation for instant communicationBuilt-in 2-Tone, 5-Tone, MDC 1200, CTCSS and DTCS capabilities as standard featuresBuilt-in MDC 1200 for transmitting a PTT ID and emergency signal and for receiving radio check, stun and reviveEnhanced scan features: monitor one or two priority channels while scanning non-priority channels Remote channel control with optional ACC cableFour watt front mounted speakerWide frequency coverage Programable microphone hanger actionOptional DTMF microphone (HM-152T)Optional voice scrambler unit (UT-109R or UT-110R)DTMF autodial functionPC programmableTalk around functionPower-on password functionNuisance delete functionTime-out-timer, lock-out penalty timerProduct CodesMfr Part No:F5011 51Output Power (at 13.6 VDC): 50W, 25W, 5W (Hi, L2, L1) Max. Frequency Deviation: ±5.0 kHz/±2.5 kHz (Wide/Narrow) Frequency Stability: ±2.5 ppm Spurious Emissions: 70 dB min. FM Hum and Noise: 46/40 dB typ. (Wide/Narrow) Audio Harmonic Distortion (AF 1 kHz 40% deviation): 3%, typical External Microphone Impedance: 600Ω (8-pin modular)  RECEIVER: Sensitivity (at 12 dB SINAD): 0.25 μV, typical Adjacent Channel Selectivity: 75/65 dB typical (Wide/Narrow) Spurious Response Rejection: 70 dB min. Intermodulation Rejection: 75 dB typ. Hum and Noise: 45/40 dB typ. (Wide/Narrow) Audio Output Power: 4W typical (at 5% distortion, 4Ω load) External speaker connector: 2-conductor 3.5 mm (1⁄8 in) / 4Ω Supplied Accessories: Hand Microphone (HM-152) Microphone Hanger DC power cable Key assign stickers Mounting bracket kit ..

2 PIN CONNECTOR FOR OPC-346 65100172702-Pin Connector | for OPC-346Two-pin connector for OPC-346 power cable.No product features currently available.Product CodesMfr Part No:6510017270..

AVMAP EKPV FREE WIRE CABLE CBY1MG0500..

AVMAP ULTRA EFIS PLUS ENGIBOX KIT FOR ROTAX UX0EFSE1AM..

CHARGING UNIT/Holds up to 4 li-polymer 3.7V batteries. For use with 9900 series wireless battery powered modules 41034G-02Series 9100 & 9900 Wireless Belt Station Charging Station | Four-BayThe digital intercom system Model A99-14CRG is a next generation four-bay battery charger that is specifically designed to charge 3.7V li-polymer batteries for David Clark's 9100 & 9900 series wireless belt stations. Each battery charges independently of the others. The batteries charge status is indicated by a multi-colored LED conveniently located next to its respective battery bay. This unit is capable of charging batteries in as little as three to four hours. Power cable options are available in a variety AC and DC configurations. Charges up to four Li-polymer 3.7V batteries for all series 9900 wireless battery powered modulesbuilt-in NFPA compliant battery holders — approved for fire & rescueDC input range from 5-volts to 15-voltsIndividual multi-color LED indicators for each batteryLi-Polymer batteries include internal thermistor for independent monitoringThree to four hour charge cycle provides full charge to depleted batteriesPower supply cord kits available (sold separately) provides 110VAC, 230VAC, 12VDC, and 24VDC)Includes permeant and portable mounting optionsRugged design for reliable serviceLow-profile, space-saving enclosure allows for flexible installation optionsProduct CodesMfr Part No:41034G-02Weight: 10.4 oz (295 g) Dimensions: 4.75 x 3.25 x 3.5 in Power Connections: DC power jack mates with C99-14xxx series power cord kits Input Voltage: 5VDC — 15VDC Input Current: 5A, max. Output Voltage: 4.2 VDC Output Current: 850 mA per battery (max.), 4A total (max.) Battery Compatibility: Li-Polymer 3.7V, 2,260 mAh (P/N 40688G-90) Mounting Method: surface or desktop mount kits (both included) Enclosure Material: Polycarbonate (enclosure), ABS (battery holders) Temperature: 32°F to 100°F 0°C to 38°C..

CIGARETTE LIGHTER CABLE IC-A6/A24/A25 CP20Cigarette Lighter Cable | IC-A6, IC-A24, IC-A25Cigarette Lighter Power Cable For IC-A6, IC-A24 & IC-A25 handheld radios.No product features currently available.Product CodesMfr Part No:CP20ECCN:5A991SCHEDULE B CODE:8544.49.0000..

COMMERCIAL BASE STATION/760 channel, 25kHz and 8.33kHz channel pitch, with 120V power supply, cabinet for base station and hand mic. A120B 24 USAIC-A120 VHF Airband Transceiver | Base StationIcom’s IC-A120 VHF Airband Mobile Transceiver introduces two features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition.The IC-A120 also features an ON-Hook scan function that automatically starts scanning when the hand microphone is hooked on the microphone hanger. When a user takes the microphone OFF hook, the scanning stops at the priority channel or displayed channel. A Dualwatch function checks the priority and operating channels alternatively. Meets IP54 standards for dust protection and water-resistance.This version (Alternate Part# IC-A120B) includes a base station with a 120-volt power supply and hand microphone.Includes:Base station cabinetHand microphone (HM-216)DC power cableMicrophone hanger kitMounting bracket kitFusesFeatures:Dot-matrix LCD display is easy to read with crisp, clear textMemory channels and other radio settings can be programmed from the front panelProvides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacingBuilt-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signalsAutomatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time)IP54 dust-protection and water-resistant construction allows the IC-A120 to be used in open-air vehiclesON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hangerDualwatch feature checks the priority and operating channels alternatively while ON-HookProvides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added — allowing for third-party wireless Bluetooth headsets to be usedThird-party headsets can be used with the optional OPC-871A headset adapterOptional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built-in speakerThe speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functionsCompatible with 12- and 24- volt systems36W (PEP) RF output powerPower-on password protectionPC programming capabilityCI-V Commands for external controlVE-PG3 RoIP gateway for interconnecting with other radio devicesProduct CodesMfr Part No:A120B 24 USAECCN:5A991NSN:5820-01-481-8769SCHEDULE B CODE:8525.60.1025Weight: 3.3 lb (1.5 kg) Dimensions: 6.3 x 1.8 x 6.9 in (161 x 45 x 175 mm) Frequency Range: 118 MHz - 136.99166 MHz, (IC-A120) 118 MHz - 136.975 MHz, (ICA120E) Channel Spacing: 25 kHz, 8.33 kHz Type of Emission: 6K00A3E/5K60A3E (FCC/EXP), 6K00A3E (Industry Canada), (IC-A120) 6K80A3E/5K00A3E, (IC-A120E) Number of Memory Channels: 200 Antenna Impedance: 50Ω, nominal Antenna Connector: SO-239 Power Supply Requirement: 13.75VDC / 27.5VDC, negative ground Current Drain (13.75 VDC): 5.0A, Tx 4.0A, maximum audio Operating Temperature: -22°C to 140°F (-30°C to 60°C), (IC-A120) -20°C to 55°C, (IC-A120E) TRANSMITTER Output Power: 9 watt, carrier power, typical (IC-A120) 9 watt, ±1.5dB, (IC-A120E) Frequency Stability: ±5 ppm (IC-A120) ±1 ppm (IC-A120E) Modulation System: Last stage modulations Audio Frequency Distortion: 10 watts, @ 13.75 VDC with 8Ω load Side tone: > 100 mW, @ 13.75 VDC with 500Ω load..

COMMERCIAL BASE STATION/760 channel, 25kHz and 8.33kHz channel pitch, with 220V power supply, cabinet for base station and hand mic. A120BEIC-A120 VHF Airband Transceiver | European Base StationIcom’s IC-A120 VHF Airband Mobile Transceiver introduces two features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition.The IC-A120 also features an ON-Hook scan function that automatically starts scanning when the hand microphone is hooked on the microphone hanger. When a user takes the microphone OFF hook, the scanning stops at the priority channel or displayed channel. A Dualwatch function checks the priority and operating channels alternatively. Meets IP54 standards for dust protection and water-resistance.This version (Alternate Part# IC-A120BE) includes a European base station with a 220-volt power supply and hand microphone.Includes:European base station cabinetHand microphone (HM-216)DC power cableMicrophone hanger kitMounting bracket kitFusesFeatures:Dot-matrix LCD display is easy to read with crisp, clear textMemory channels and other radio settings can be programmed from the front panelProvides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacingBuilt-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signalsAutomatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time)IP54 dust-protection and water-resistant construction allows the IC-A120 to be used in open-air vehiclesON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hangerDualwatch feature checks the priority and operating channels alternatively while ON-HookProvides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added — allowing for third-party wireless Bluetooth headsets to be usedThird-party headsets can be used with the optional OPC-871A headset adapterOptional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built-in speakerThe speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functionsCompatible with 12- and 24- volt systems36W (PEP) RF output powerPower-on password protectionPC programming capabilityCI-V Commands for external controlVE-PG3 RoIP gateway for interconnecting with other radio devicesProduct CodesMfr Part No:A120BEECCN:5A991SCHEDULE B CODE:8525.60.1025Weight: 3.3 lb (1.5 kg) Dimensions: 6.3 x 1.8 x 6.9 in (161 x 45 x 175 mm) Frequency Range: 118 MHz - 136.99166 MHz, (IC-A120) 118 MHz - 136.975 MHz, (ICA120E) Channel Spacing: 25 kHz, 8.33 kHz Type of Emission: 6K00A3E/5K60A3E (FCC/EXP), 6K00A3E (Industry Canada), (IC-A120) 6K80A3E/5K00A3E, (IC-A120E) Number of Memory Channels: 200 Antenna Impedance: 50Ω, nominal Antenna Connector: SO-239 Power Supply Requirement: 13.75VDC / 27.5VDC, negative ground Current Drain (13.75 VDC): 5.0A, Tx 4.0A, maximum audio Operating Temperature: -22°C to 140°F (-30°C to 60°C), (IC-A120) -20°C to 55°C, (IC-A120E) TRANSMITTER Output Power: 9 watt, carrier power, typical (IC-A120) 9 watt, ±1.5dB, (IC-A120E) Frequency Stability: ±5 ppm (IC-A120) ±1 ppm (IC-A120E) Modulation System: Last stage modulations Audio Frequency Distortion: 10 watts, @ 13.75 VDC with 8Ω load Side tone: > 100 mW, @ 13.75 VDC with 500Ω load Output Power: 9 watt, carrier power, typical (IC-A120) 9 watt, ±1.5dB, (IC-A120E) Frequency Stability: ±5 ppm (IC-A120) ±1 ppm (IC-A120E) Modulation System: Last stage modulations Audio Frequency Distortion:..

CUB/HIGH WING KIT-NO PLATE/25 89000008-001005KR 10 Lift Reserver Indicator | High Wing/Strut Mount, 25ft hose kitThe KR 10 Lift Reserve Indicator measures pressure at two points from an AOA probe mounted to the wing in reference to a wing chord that conveys changes in air pressure, via sense lines, to the KLR 10 IF module.  The KLR 10 is a stand-alone system that does not interfere or replace any existing instrument or displays.This KR 10 lift reserve indicator (Alternate Part# 008-001005) includes: KLR 10 indicator and cableKLR 10 interface module and power cableKLR 10 auxiliary cableHigh wing/strut mounting plating25-foot hose kitSmall flat-head screw driver for calibrationProtractorInstallation manualPilot's guideCertificate of conformity Product CodesMfr Part No:89000008-001005SCHEDULE B CODE:9014.20.80Operating Airspeed: 25 – 500 knots TAS Operating Altitude: 0 – 30,000 ft MSL Humidity: 96%, maximum Temperature: -20°C to 66°C, operating -30°C to 85°C, storage Voltage: 12V – 28V Electrical Load: IF Module: 15°, the accuracy may be diminished. However, the error will cause the warning indications to provide a greater margin of safety prior to wing stall) Calibration Accuracy: A properly calibrated system will result in an accuracy of ±3% over the full scale of the calibration...

DC POWER CABLE..

DC POWER CABLE FOR IC-A110,IC-A120. OPC-344DC Power Cable | IC-A110 & IC-A120 Air Band RadiosThe OPC-344 DC power cable for IC-A110 and IC-120 Air band mobile radio.Works with the IC-A110 & IC-A120 mobile radios from IcomProduct CodesMfr Part No:OPC-344ECCN:5A991SCHEDULE B CODE:8544.19.0000..

DC POWER CABLE/12-15VDC. For use with IC-A16,IC-A16B. OPC515L..

DC POWER CABLE/3m/F121/F221 OPC-1132DC Power Cable | F121 & F122, 9.8 ftOPC-1132 is a DC power cable for F121 and F122 radios from Icom.Works in conjunction with Icom's F121 and F122 radiosProduct CodesMfr Part No:OPC-1132Length: 9.8 ft (3 m)..

DC POWER CABLE/BC-121/12-16V. For use with IC-A16, IC-A16B. OPC-656OPC-656 DC Power CableThe OPC-656 DC power cable is for for use with the BC-121N must-charging unit for charging Icom's IC-A16 series radios. DC power cable for BC-121N gang chargerProduct CodesMfr Part No:OPC-656ECCN:5A991SCHEDULE B CODE:8544.19.0000..

DC POWER/CHARGE CORD/A4/A5/A23 OPC254LDC Power Cable | for External 12V Power SourcesOPC-254L is a DC power cable for use with an external 12-volt DC power supply.No product features currently available.Product CodesMfr Part No:OPC254LECCN:5A991SCHEDULE B CODE:8544190000..

DUAL XHUD1000 HEAD UP DISPLAY XHUD1000..

DUALAV XHUD1000 HEADS UP DISPLAY & XGPS190D BUNDLE XGPS COMBO PROMO..

EKPV FREE WIRE CABLE/Free wire power cable with one USB input for connection interface with external devices CBY1MG0500..