69828 LYCOMING GASKET 69828. Aviation aftermarket seal or gasket. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 69828 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

69949-1 LYCOMING KIT - SEAL & GASKET SET 69949-1. Aviation aftermarket seal or gasket. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 69949-1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

6Q SEL 152MHZ V/O/T 28V BLK 071-01282-0043KFS 598A Control Display Unit | Black Faceplate, 151.975MHz, 28V, VOLUME/ON/OFF/TESTThe KFS 598A is the control/display unit for the KTR 908 VHF communications transceiver. The digital gas discharge display simultaneously shows readouts of active and standby frequencies. When used with the KNS-660 system a nine-slot, non-volatile, pilot programmable frequency and storage option is available. Version 071-01282-0043 has a black face with VOLUME, ON/OFF, TEST control, 28V lighting and 151.975 MHz frequencies.Digital control for use with KTR-908 VHF communications transceiver7-segment gas discharge readoutsCool-burning readouts for greater reliabilityACTIVE and STANDBY frequency displaysAutomatic squelch eliminates need for manual adjustments but manual squelch override provided with pulling of ON/OFF/VOLUME knobAutomatic dimming circuit adjusts brightness of displayFlip-flop frequency transfer button9 preset channel memoryMay be configured for additional channel mode and/or tandem cockpit applicationsDisplay dimmer overrideDirect channeling of frequency displayed in Active windowFrequency management capability when used with KNS-660 systemProduct CodesMfr Part No:071-01282-0043SCHEDULE B CODE:8537.10.9090Weight: 0.5 lb Dimensions: 5.5 x 2.193 x 2.35 in. Temperature range: -20ºC to +55ºC TSO compliance: Environmental Cat.:7b and C38b..

6X2 AERO CLASSIC SOLID TAILWHEEL TIRE 6350. Aircraft tire. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 6350 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

7 MULTI-CONDUCTOR CABLE/1 length, spool. EPD-RWC-123057 MULTI-CONDUCTOR CABLE/1 length, spool.7 CONDUCTOR CABLEProduct CodesMfr Part No:EPD-RWC-12305..

7 QUARTER TURN FASTENER TRAY ADAPTER/BLACK TA07-0017 QUARTER TURN FASTENER TRAY ADAPTER/BLACK2.67" 7 Dzus Tray Adaptor (BLK Trim) The TA Series Tray Adapter will convert common size Dzus mount products into 6.25 tray mount products. Lightweight at .2 to .25 lbs., the TA allows installers to flush mount mixed avionics quickly and easily, saving install time and providing a uniform professional installation. The adapter has been rigorously tested to DO-160D vibration and shock standards for equipment weighing up to 5 pounds.Product CodesMfr Part No:TA07-001ECCN:EAR99SCHEDULE B CODE:8536.69.4040..

7.4V 200mAh 2S 30C Li-Po Battery EFL B2002S30. Aircraft battery. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number EFL B2002S30 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

7.4V/2000mAh LI-ION BATTERY PACK BP245N7.4V/2000mAh LI-ION BATTERY PACKLi-Ion battery pack for the M72 handheld marine transceiver.Product CodesMfr Part No:BP245N Hazmat charges may apply..

7.5 AMP CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 2TC14-7.52TC14 Series Circuit Breaker | 7.5 Amp RatingThe 2TC14 series single-phase circuit breakers provide reliable state-of-the-art circuit protection for aerospace power systems. The compact and lightweight design makes these circuit breakers well suited for aircraft avionics and electronic systems. The 2TC series ratings is coordinated so any rating will trip before another rating twice its capacity in the event of a fault. Ambient temperature compensation allows the 2TC circuit breakers to operate where temperatures exceeds the 160°F maximum of non–ambient compensated thermal circuit breakers and may also operate in temperatures as high as 150°F without derating the circuit breaker while eliminating the need for added cooling.  Includes hardware.This 2TC14 circuit breaker (Alternate Part# 2TC14-7.5) is rated for 7.5 amps. Compact size and weightTrip-free design1 to 25 Amp current ratingHigh vibration resistanceHigh interrupting capacity up to 6,000 amps at 28 VDC and 3,500 amps at 120 VAC, 400 HzTypically used on aircraft power distribution systemsAS58091 qualified as well as military approvals, and FAA PMAProduct CodesMfr Part No:2TC14-7.5Weight: 24 g, maximum Current Rating: 7.5 Amps Vibration: 10G minimum, 50 - 500 Hz Mechanical Shock: 50G Acceleration: 10G Interrupt Current:  1–20 amps: 6,000 amps at 28 VDC 25 amps: 1,625 amps at 28 VDC 1–15 amps: 2,500 amps at 120 VAC, 400 Hz 20 amps: 2,000 amps at 120 VAC, 400 Hz 25 amps: 1,800 amps at 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load Operating Altitude: 70,000 ft..

7.5 AMP FUSE OAGC07.5V7.5 AMP FUSE7.5 AMP 32 AC/DC 3AG glass body fuse3AGPackage of 5 fusesProduct CodesMfr Part No:OAGC07.5VECCN:EAR99SCHEDULE B CODE:8536100020..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 2TC12-7.52TC12 Series Circuit Breaker | 7.5 Amp RatingThe 2TC12 series single-phase circuit breakers provide reliable state-of-the-art circuit protection for aerospace power systems. The compact and lightweight design makes these circuit breakers well suited for aircraft avionics and electronic systems. The 2TC series ratings is coordinated so any rating will trip before another rating twice its capacity in the event of a fault. Ambient temperature compensation allows the 2TC circuit breakers to operate where temperatures exceeds the 160°F maximum of non–ambient compensated thermal circuit breakers and may also operate in temperatures as high as 150°F without derating the circuit breaker while eliminating the need for added cooling.  Includes hardware.This 2TC12 circuit breaker (Alternate Part# 2TC12-7.5) is rated for 7.5 amps. Compact and lightweightTrip–free designCurrent ratings 1 to 25 ampsHigh vibration resistanceHigh interrupting capacityCoordinated ratingsAS58091 qualified (Also: Military Approvals, FAA PMA)Typical end use: Aircraft power distribution systemsProduct CodesMfr Part No:2TC12-7.5Weight: 25 g Dimensions: 0.781 x 1.343 x 0.593 in  Current Rating: 7.5 Amps Vibration: 10G minimum, 50 Hz – 500 Hz Mechanical Shock: 50G Acceleration: 10G Interrupt Current: 1 – 15 amps: 2500 amps @ 120 VAC, 400 Hz 1 – 20 amps: 6000 amps @ 28 VDC 25 amps: 1625 amps @ 28 VDC 20 amps: 2000 amps @ 120 VAC, 400 Hz 25 amps: 1800 amps @ 120 VAC, 400 Hz Endurance: 2500 cycles: 120 VAC, 400 Hz (inductive) 5000 cycles: 120 VAC, 400 Hz (resistive) 2500 cycles: 30 VDC (inductive) 5000 cycles: 30 VDC (resistive) 10000 cycles: mechanical, no load Operating Altitude: 70,000 ft..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 3TC7-7 1/23TC7 Series Circuit Breaker | 7.5 Amp RatingThe 3TC7 series single-phase circuit breakers provide reliable state-of-the-art circuit protection for aerospace systems. The compact and lightweight design makes these circuit breakers well suited for aircraft avionics and electronic systems. The 3TC series ratings is coordinated so any rating will trip before another rating twice its capacity in the event of a fault. Ambient temperature compensation allows the 3TC circuit breakers to operate where temperatures exceeds the 160°F maximum of non–ambient compensated thermal circuit breakers and may also operate in temperatures as high as 150°F without derating the circuit breaker while eliminating the need for added cooling.  Includes hardware.This 3TC7 series circuit breaker (Alternate Part# 3TC7-7.5) is rated for 7.5 amps. Miniature sizeLight weightTrip-free designCurrent rating: 7.5 ampsAS58091 qualified (MS25244)High vibration resistanceTypical use: Aircraft, avionics and electrical systemsProduct CodesMfr Part No:3TC7-7 1/2MIL SPEC:MS25244-7.5ECCN:EAR99MIL SPEC:MS25244-7.5NSN:5925-00-686-3298SCHEDULE B CODE:8536.20.0020Weight: 0.1 lb, max. Dimensions: 1.094 x 0.75 x 1.49 in Current Rating: 7.5 Amps Vibration: 10G Mechanical Shock: 30G, peak Acceleration: 10G Sand and Dust: 12 hr Corrosion: salt spray 96 hr Moisture: 10 days Explosion Proof: while interrupting rupture currents Interrupt Current: 15–35 amps: 6,000 amps @ 28 VDC  15–35: 2,000 amps @ 120 VAC, 400 Hz  25 amps: 1,800 amps @ 120 VAC, 400 Hz Endurance: 2500 cycles: 120 VAC, 400 Hz (inductive) 5000 cycles: 120 VAC, 400 Hz (resistive) 2500 cycles: 30 VDC (inductive) 5000 cycles: 30 VDC (resistive) 10000 cycles: mechanical, no load Operating Altitude: 65,000 ft Voltage Drop: 5A – 35A: 0.25V, max...

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 6TC14-7.56TC14 Series Circuit Breaker | 7.5 Amp RatingThe 6TC ambient compensated circuit breakers provide a three-phase design in a lightweight and miniature package. The three-phase design integrates each individual phase to provide over current protection in the event of simultaneous or unbalanced overloads including short circuit protection. The 6TC series are compatible with the single phase 2TC and 3TC counter parts. The 6TC circuit breakers are available in ratings from 1 amp to 35 amp with military and commercial approval on most styles. Includes hardware.This 6TC14 circuit breaker (Alternate Part# 6TC14-7.5) is rated for 7.5 amps. One phase trips all designProtective shielding between each phase terminalPads for increased mounting securityAmbient temperature compensationTrip-free designHigh short circuit capacityProduct CodesMfr Part No:6TC14-7.5MIL SPEC:MIL-C-5809MIL SPEC:MIL-C-5809Weight: 65 g, max. Dimensions: 6TC14: 1.8 x 1.218 x 1.1 in, max. Current Rating: 7.5 Amps Vibration: 10G, minimum (50Hz – 500Hz) Mechanical Shock: 50G Acceleration: 10G Interrupt Current: 2A – 20A: 2000A at 120 VAC, 400 Hz 15A – 35A: 2000A at 120 VAC, 400 Hz Endurance: 2500 cycles: 120 VAC, 400 Hz (inductive) 5000 cycles: 120 VAC, 400 Hz (resistive) 5000 cycles: mechanical, no load Qualifications: MS14154..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7270-1-7.57270-1 Series Circuit Breaker | 7.5 Amp Rating, Toggle ActuatorThe Klixon® 7270 series circuit breakers are designed to utilize less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. Inherently resistant to shock and vibration, the disc element is capable of calibration within close tolerances throughout the service life of the breaker. The 7270-1 series circuit breaker feature a single pole, toggle actuator.  Includes hardware.This 7270-1 series circuit breaker (Alternate Part# 7270-1-7.5) is rated for 7.5 amps. Toggle actuatorTrip-free operationSnap-acting thermal elementSmall sizeLight weightMIL-C-5809 qualifiedCurrent ratings (3 to 35 amps)High interrupting capacityProduct CodesMfr Part No:7270-1-7.5MIL SPEC:MS24509-A-7 1/2ECCN:EAR99MIL SPEC:MS24509-A-7 1/2SCHEDULE B CODE:8536.20.0020Weight: 39 grams maximum Current Rating: 7.5 amps Vibrations: 10G minimum, 50–500 Hz Mechanical shock: 30G Acceleration: 10G Endurance: 5,000 cycles: 120 VAC. 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 5,000 cycles: 30 VDC, inductive 2,500 cycles: 30 VDC, resistive 5,000 cycles: Mechanical, no load Mounting: Screw terminals and neck mounting..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7270-5-7.57270-5 Series Circuit Breaker | 7.5 Amp Rating, Bat ToggleThe Klixon® 7270 series circuit breakers are designed to utilize less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. Inherently resistant to shock and vibration, the disc element is capable of calibration within close tolerances throughout the service life of the breaker. The 7270-5 series circuit breaker feature a single pole, bat handle toggle actuator.  Includes hardware.This 7270-5 series circuit breaker (Alternate Part# 7270-5-7.5) is rated for 7.5 amps. Bat handle toggle actuatorTrip-free operationSnap-acting thermal elementSmall sizeLight weightMIL-C-5809 qualifiedCurrent ratings (3 to 35 amps)High interrupting capacityProduct CodesMfr Part No:7270-5-7.5MIL SPEC:MIL-C-5809ECCN:EAR99MIL SPEC:MIL-C-5809SCHEDULE B CODE:8536.20.0020Weight: 39 grams maximum Current Rating: 7.5 amps Vibrations: 10G minimum, 50–500 Hz Mechanical shock: 30G Acceleration: 10G Endurance: 5,000 cycles: 120 VAC. 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 5,000 cycles: 30 VDC, inductive 2,500 cycles: 30 VDC, resistive 5,000 cycles: Mechanical, no load Mounting: Screw terminals and neck mounting..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7271-8-7 1/27271-8 Series Circuit Breaker | 7.5 Amp Rating, Push ButtonThe Klixon® 7271 series circuit breakers are designed to utilize less space behind the panel while protecting wire and cable in aircraft and ground support equipment on 120 VAC, 400 Hz or 30 VDC systems. Inherently resistant to shock and vibration, the disc element is capable of calibration within close tolerances throughout the service life of the breaker. The 7271 series circuit breaker feature a single pole, push button actuator that pops out for trip indication.  Includes hardware.This 7271-8 series circuit breaker (Alternate Part# 7271-8-7.5) is rated for 7.5 amps.Trip-free operationSnap-acting thermal elementSmall sizeLight weightMIL-C-5809 qualifiedCurrent ratings (3 to 35 amps)High interrupting capacityProduct CodesMfr Part No:7271-8-7 1/2MIL SPEC:MS24510-A 7 1/2ECCN:EAR99MIL SPEC:MS24510-A 7 1/2SCHEDULE B CODE:8536.20.0020Weight: 39 grams maximum Current Rating: 7.5 amps Vibrations: 10G minimum, 50–500 Hz Mechanical shock: 30G Acceleration: 10G Endurance: 5,000 cycles: 120 VAC. 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 5,000 cycles: 30 VDC, inductive 2,500 cycles: 30 VDC, resistive 5,000 cycles: Mechanical, no load Mounting: Screw terminals and neck mounting..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7274-11-71/27274-11 Series Circuit Breaker | 7.5 Amp RatingKlixon® 7274-11 series circuit breakers are small, lightweight, and low amperage devices specifically designed to protect aircraft and aerospace cables, and components. The 7274 features a trip–free, indicating reset button and is available in standard ratings from ½ to 20 amps. Includes hardware.This 7274-11 series circuit breaker (Alternate Part# 7274-11-75) is rated for 7.5 amps. Single-Phase, Non-CompensatedUses minimum spaceLight weightTrip-free designMIL-C-5809 qualifiedLow amp ratingHigh vibration resistanceDesigned to protect military airborne vehicles and equipment Product CodesMfr Part No:7274-11-71/2MIL SPEC:MS22073-7 1/2ECCN:EAR99MIL SPEC:MS22073-7 1/2SCHEDULE B CODE:8536.20.0020Weight: 33g, maximum Current Rating: 7.5 amps Vibrations: 10G, minimum, 50 to 500 Hz Mechanical Shock: 35G Acceleration: 10G Interrupt Current: 0.50A – 5A: unlimited @ 28 VDC 7.50A – 15A: 2,000A @ 28 VDC 0.50A – 1.50A: unlimited @ 120 VAC, 400 Hz 2A – 5A: 800A @ 120 VAC, 400 Hz 7.50A – 20A: 500A @ 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load Voltage Drop (at nominal rated current): 0.30V @ 7.5A..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7274-2-7 1/27274-2 Series Circuit Breaker | 7.5 Amp RatingKlixon® 7274-2 series circuit breakers are small, lightweight, and low amperage devices specifically designed to protect aircraft and aerospace cables, and components. The 7274 features a trip–free, indicating reset button and is available in standard ratings from ½ to 20 amps. Includes hardware.This 7274-2 series circuit breaker (Alternate Part# 7274-2-7.5) is rated for 7.5 amps. Single-Phase, Non-CompensatedUses minimum spaceLight weightTrip-free designMIL-C-5809 qualifiedLow amp ratingHigh vibration resistanceDesigned to protect military airborne vehicles and equipmentProduct CodesMfr Part No:7274-2-7 1/2MIL SPEC:MS26574-7.5ECCN:EAR99MIL SPEC:MS26574-7.5NSN:5925-00-935-5287SCHEDULE B CODE:8536.20.0020Weight: 28g, maximum Current Rating: 7.5 amps Vibrations: 10G, minimum, 50 to 500 Hz Mechanical Shock: 35G Acceleration: 10G Interrupt Current: 0.50A – 5A: unlimited @ 28 VDC 7.50A – 15A: 2,000A @ 28 VDC 0.50A – 1.50A: unlimited @ 120 VAC, 400 Hz 2A – 5A: 800A @ 120 VAC, 400 Hz 7.50A – 20A: 500A @ 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load Voltage Drop (at nominal rated current): 0.30V @ 7.5A..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7277-2-7 1/27277-2 Series Circuit Breaker | 7.5 Amp RatingKlixon 7277-2 series circuit breakers are meant for use in applications that do not require military approvals. The trip-free 7277 was originally developed as an alternative to slow blow fuses and is used extensively as primary electrical circuit protection on general aviation aircraft. The military grade version of this circuit breaker is physically and electrically identical to the Klixon 7277, which has wider calibration limits. Includes hardware.This 7277 series circuit breaker (Alternate Part# 7277-2-7.5) is rated for 7.5 amps. Miniature sizeLight weightTrip free designCurrent ratings (0.5 to 20 amps)High vibration resistanceElectrical circuit protection on general aviation aircraftProduct CodesMfr Part No:7277-2-7 1/2ECCN:EAR99SCHEDULE B CODE:8536.20.0020Weight: 28 grams, maximum Current Rating: 7.5 Amps Vibrations: 10G minimum, 50–500 Hz Mechanical shock: 35G Acceleration: 10G Interrupt Current: 0.50–5 amps: unlimited at 28 VDC 7.50–15 amps: 2,000 amps at 28 VDC 0.50–1.50 amps: unlimited at 120 VAC, 400 Hz 2–5 amps: 800 amps at 120 VAC  400 Hz 7.50–20 amps: 500 amps at 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 2,500 cycles: 30 VDC inductive  5,000 cycles: 120 VAC, 400 Hz resistive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7277-5-7 1/27277-5 Series Circuit Breaker | 7.5 Amp RatingKlixon 7277 series circuit breakers are meant for use in applications that do not require military approvals. The trip-free 7277 was originally developed as an alternative to slow blow fuses and is used extensively as primary electrical circuit protection on general aviation aircraft. The military grade version of this circuit breaker is the physically and electrically identical Klixon 7277, which has wider calibration limits. Includes hardware.This 7277 series circuit breaker (Alternate Part# 7277-5-7.5) is rated for 7.5 amps. Miniature sizeLight weightTrip free designCurrent ratings (0.5 to 20 amps)High vibration resistanceTypical use: computers, construction, data processing and telecommunications equipment, flight simulators, general aviation aircraft, materials handling, industrial electronic equipment, trainers and simulators, where all breakers are operated on low ampere control currentProduct CodesMfr Part No:7277-5-7 1/2ECCN:EAR99SCHEDULE B CODE:8536.20.0020Weight: 28 grams, maximum Current Rating: 7.5 Amps Vibration: 10G minimum, 50Hz – 500Hz (other vibration levels available) Mechanical Shock: 35G Acceleration: 10G Interrupt Current: 0.50–5 amps: unlimited at 28 VDC 7.50–15 amps: 2,000 amps at 28 VDC 0.50–1.50 amps: unlimited at 120 VAC, 400 Hz 2–5 amps: 800 amps at 120 VAC, 400 Hz 7.50–20 amps: 500 amps at 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load..

7.5 AMP KLIXON CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 7274-4-7.57274-4 Series Circuit Breaker | 7.5 Amp RatingKlixon® 7274-4 series circuit breakers are small, lightweight, and low amperage devices specifically designed to protect aircraft and aerospace cables, and components. The 7274 features a trip–free, indicating reset button and is available in standard ratings from 1/2 to 20 amps. Includes hardware.This 7274-4 series circuit breaker (Alternate Part# 7274-4-7.5) is rated for 7.5 amps. Single-Phase, Non-CompensatedUses minimum spaceLight weightTrip-free designMIL-C-5809 qualifiedLow amp ratingHigh vibration resistanceDesigned to protect military airborne vehicles and equipmentProduct CodesMfr Part No:7274-4-7.5MIL SPEC:ms26574-7 1/2MIL SPEC:ms26574-7 1/2Weight: 28g, maximum Current Rating: 7.5 amps Vibrations: 10G, minimum, 50 to 500 Hz Mechanical Shock: 35G Acceleration: 10G Interrupt Current: 0.50A – 5A: unlimited @ 28 VDC 7.50A – 15A: 2,000A @ 28 VDC 0.50A – 1.50A: unlimited @ 120 VAC, 400 Hz 2A – 5A: 800A @ 120 VAC, 400 Hz 7.50A – 20A: 500A @ 120 VAC, 400 Hz Endurance: 2,500 cycles: 120 VAC, 400 Hz inductive 5,000 cycles: 120 VAC, 400 Hz resistive 2,500 cycles: 30 VDC inductive 5,000 cycles: 30 VDC resistive 10,000 cycles: Mechanical, no load Voltage Drop (at nominal rated current): 0.30V @ 7.5A..

70 AMP CIRCUIT BREAKER/1.93X.75X2.189. Includes: Nut-washer key plate and screws for terminals. 6752-100-706752-100 Series Circuit Breaker | 70 Amp Rating, Push ButtonThe 6752-100 series thermal–magnetic circuit breakers are designed and manufactured to meet stringent military standards with the reliability of the 6752 design. These circuit breakers feature a single pole, push button switch design.  The 6752-100 is similar to the 6752-12 in size, with higher interrupting capacity, vibration resistance and longer cycling life. In addition, the 6752-100 series provides ambient compensation, fault coordination of all ratings and an option for auxiliary circuits. Includes hardware.This 6752-100 series circuit breaker (Alternate Part# 6752100-70) is rated for 70 amps.Current ratings: 50–100 ampsProven reliability and performance of the 6752 series circuit breakerTrip–free designCircuit protection unaffected by temperature fluctuationsMIL-C-5809 qualifiedAmbient compensatedHigh vibration resistanceHigh interrupting capacity: 6,000 ampsTypical use: MilitaryProduct CodesMfr Part No:6752-100-70MIL SPEC:MS25361-70ECCN:EAR99MIL SPEC:MS25361-70NSN:5925-00-823-2366SCHEDULE B CODE:8536.20.0020Weight: 0.25 lbs (114 gm) max Current Rating: 70 amps Vibrations: 10 G’s minimum, 50-2000 Hz Mechanical shock: 30G Acceleration: 10G Endurance: 5,000 cycles: 120 VAC. 400 Hz, inductive 5,000 cycles: 120 VAC 400 Hz, resistive 5,000 cycles: 28 VDC, inductive 2,500 cycles: 28 VDC, resistive 5,000 cycles: Mechanical, no load Mounting: Screw terminals and neck mounting..

70 AMP E-T-A CIRCUIT BREAKER/Includes: Nut-washer key plate and screws for terminals. 413-K14-LN2-70AK14LN2 Series Circuit Breaker | 70 Amp Rating, Push/Pull ActuatorThe K14LN2 series high performance, thermal, single-pole, circuit breaker has a tease-free, trip-free, snap action mechanism with push-pull, on-off manual actuation. The tripped-off position is clearly shown by a colored band. Includes hardware.This K14LN2 series circuit breaker (Alternate Part# K14LN2-70) is rated for 70 amps. 70 Amp current rating @ 28 VDCDesigned for extra low voltage wiring applicationsSuitable for all types of land, sea, and air vehicles as well as defense equipment and battery powered machines.  Product CodesMfr Part No:413-K14-LN2-70AECCN:EAR99SCHEDULE B CODE:8536.20.0020UL:YESWeight: 65 grams (approx.) Current Rating: 70 amps Voltage Rating: 28 VDC Typical Life: 2,000 operations Ambient Temperature: -55°C to 75°C (-67°F to 167°F) Insulation Resistance: >100 MΩ (500 VDC) Interrupting Capacity: 6,000A Degree of Protection (IEC 60529/DIN 40050): operating area IP40 terminal area IP00 Vibration: 10 g (56-500 Hz), ± 0.76 mm (10-55 Hz) to VG 95210, sheet 19, MIL-STD-202, meth. 204, IEC 60068-2-6, test Fc Shock: 50 g (11 ms) to VG 95210, sheet 28, MIL-STD-202, meth. 213, IEC 60068-2-27, test Ea Corrosion: 96 hours at 5 % salt mist, to VG 95210, sheet 2, MIL-STD-202, meth. 101, IEC 60068-2-11, test Ka Humidity: 240 hours at 95 % RH to VG 95210, sheet 7, MIL-STD-202, meth. 106, IEC 60068-2-3, test Ca..

70 PIECE TOOL SET/Crescent CTK70MP70-Piece Professional Tool Set | with Hard CaseThis 70-Piece professional tool kit includes thirty-two drive sockets and a 1/4-inch and 3/8-inch drive ratchets. This tool set includes:3/8 inch and 1/4 inch drive ratchets1/4 inch and 3/8 inch x 3-inch extensionsSAE and metric sockets (32 qty)SAE hex key set (8 qty)Multi-bit dura-driver screwdriver and 12 bitsSAE and metric combination wrenches (12 qty)Product CodesMfr Part No:CTK70MPECCN:EAR99SCHEDULE B CODE:8203.20.6060Number of Sockets: 32 Drive Size: 1/4 in & 3/8 in Measurement System: imperial Included Tools: 3/8 in Drive, 1/4 in Drive Ratchet Handles, 1/4 in Extensions, 3/8 x 3 in Extensions, (32 qty) SAE and Metric Sockets, (8 qty) SAE Hex Key Set, Multi-Bit DuraDriver Screwdriver and 12 Bits, (12 qty) SAE and Metric combination Wrenches..

700 X 8 6PLY VINTAGE (DIAMOND TREAD) 31315. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 31315 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...