SV-HDX1100 10 SkyView HDX Touch Display, with Harness & Mapping Software DYNON SV-HDX1100..

SV-HDX800 7 SkyView HDX Touch Display, with Harness & Mapping Software DYNON SV-HDX800..

SWITCH AND CABLE ASSEMBLY/Black case with large clothing clip/TJT-120 JACK/Momentary lock intercom system key switch with mic hi interrupt and 3' coil cable with a MS3476W10-6P Plug CIX313K3-6WSWITCH AND CABLE ASSEMBLY/Black case with large clothing clip/TJT-120 JACK/Momentary lock intercom system key switch with mic hi interrupt and 3' coil cable with a MS3476W10-6P PlugSWITCH AND CABLE ASSEMBLY/Black case with large clothing clip/TJT-120 JACK/Momentary lock intercom system key switch with mic hi interrupt and 3' coil cable with a MS3476W10-6P PlugProduct CodesMfr Part No:CIX313K3-6W..

TELEX HEADSET/AIRMAN 850, ANR 12 DB, electret mic, GA plug, 2 x PJ connection, 150 ohms, 3 year warranty 301317-000Airman 850 ANR Headset | Double-sided, Dual PJ connector, 150ΩThe Telex Airman 850 ANR headset is an ultra-lightweight commercial headset that dramatically improves the clarity of communication and does not require batteries or panel power—active noise reduction is powered by microphone bias. Using the latest in ANR circuitry to target and reduce wind noise in jet cockpits, the Airman 850 provides up to 12 decibels (dB) of noise attenuation between 100 and 2000 Hz. It also features a miniature, amplified, noise-canceling electret microphone that provides superior 400Hz hum rejection. The flexible boom rotates 320° and can be worn on either side of the head. The Airman 850 is available for Boeing, Airbus, and other airframes and does not require specialized intercom adapters. Approved for aircraft use under FAA TSO-C57a and C58a.This Airman 850 ANR headset (Alternate Part# 301317-000) is double-sided, with a dual PJ-068 and PJ-055 connector, and has a 150Ω impedance. No batteries requiredNoise reduction targeted at wind noise for reduced fatigueCombined active noise reduction and microphone noise cancellation provide clear in-flight communicationsUltra-lightweight headset combined with pillow-like ear cushions ensure comfort on long flightsFAA TSO-C57a and C58a approvedProduct CodesMfr Part No:301317-000ECCN:7A994PROAPP:PT4047CESCHEDULE B CODE:8518.30.2000SIN:332999TSO:C57a, C58aWeight: 4.02 oz (113.98 g) Boom: Flexible Boom Color: Black Cord Length: 5.58 ft (1.7 m) Ear Seals: Plush foam Frequency Response: 350 Hz – 15,000 Hz Impedance: 150Ω ±20% Microphone Frequency Response: 300 Hz – 6,000 Hz Microphone Impedance: 50Ω – 600Ω Microphone Sensitivity: -51 ±3 dB dBV/Pa Microphone Type: Noise-Cancelling Amplified Electret Noise Reduction: ≤12 dB Power: via mic bias Power Requirements: Microphone Bias (requires boom microphone to be powered continuously) Speaker: Dynamic Speaker Sensitivity: 85 – 95 SPL/mW Stereo: No FAA TSO Approvals:  C57a and C58a..

TELEX HEADSET/AIRMAN 850, ANR 12 DB, XLR-5-12C connection, for use with AIRBUS, 3 year warranty 301317-002Airman 850 ANR Headset | Double-sided, XLR5 connector, 600ΩThe Telex Airman 850 ANR headset is an ultra-lightweight commercial headset that dramatically improves the clarity of communication and does not require batteries or panel power—active noise reduction is powered by microphone bias. Using the latest in ANR circuitry to target and reduce wind noise in jet cockpits, the Airman 850 provides up to 12 decibels (dB) of noise attenuation between 100 and 2000 Hz. It also features a miniature, amplified, noise-canceling electret microphone that provides superior 400Hz hum rejection. The flexible boom rotates 320° and can be worn on either side of the head. The Airman 850 is available for Boeing, Airbus, and other airframes and does not require specialized intercom adapters. Approved for aircraft use under FAA TSO-C57a and TSO-C58a.This Airman 850 ANR headset (Alternate Part# 301317-002) is double-sided, with an XLR-5-12C connector, and a 600Ω impedance.No batteries requiredNoise reduction targeted at wind noise for reduced fatigueCombined active noise reduction and microphone noise cancellation provide clear in-flight communicationsUltra-lightweight headset combined with pillow-like ear cushions ensure comfort on long flightsFolds flat into a custom protective carrying caseFAA TSO approvedProduct CodesMfr Part No:301317-002ECCN:7A994SCHEDULE B CODE:8518.30.2000TSO:C57a, C58aWeight: 4.02 oz (113.98 g) Boom: Flexible Boom Color: Black Cord Length: 5.58 ft (1.7 m) Ear Seals: Plush foam Frequency Response: 350 Hz – 15,000 Hz Impedance: 150Ω ±20% Microphone Frequency Response: 300 Hz – 6,000 Hz Microphone Impedance: 50Ω – 600Ω Microphone Sensitivity: -51 ±3 dB dBV/Pa Microphone Type: Noise-Cancelling Amplified Electret Noise Reduction: ≤12 dB Power: via mic bias Power Requirements: Microphone Bias (requires boom microphone to be powered continuously) Speaker: Dynamic Speaker Sensitivity: 85 – 95 SPL/mW Stereo: No FAA Approvals:  TSO-C57a and TSO-C58a..

The Eliminator EMI Noise Filter LON 122253-10A. Engine, fuel, hydraulic, or air filter. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number LON 122253-10A against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Transcom III Portable Stereo Intercom, 2-6 Place SIG SPO..

TRIPLE HEADSET ADAPTER/ Converts one radio or intercom Helicopter/Military jack into three sets. PA-90HTRIPLE HEADSET ADAPTER/ Converts one radio or intercom Helicopter/Military jack into three sets. Product CodesMfr Part No:PA-90H..

TRIPLE HEADSET ADAPTER/converts one set of radio/intercom mic and phone jacks into three sets PA-90STRIPLE HEADSET ADAPTER/converts one set of radio/intercom mic and phone jacks into three setsTriple Headset Adapter: Converts one set of radio or intercom mic and phone jacks into three sets.Product CodesMfr Part No:PA-90SECCN:EAR99SCHEDULE B CODE:8544.49.0000..

V16 VHF Aviation Com Radio, Experimental MGL V16. Avionics communication unit. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number MGL V16 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

VHF AIRBAND TRANSCEIVER/Vehicle mount, 12-24 VDC, OLED display includes MB-53 mounting bracket, HM-176 microphone and SP-35 external speaker. IC-A220MIC-A220 VHF Airband Transceiver | Vehicle MountThe IC-A220 VHF Airband Transceiver features an innovative, easy to read OLED display. It provides higher contrast, wider viewing angle of almost 180 degrees, and faster response time than a conventional LCD. The most frequently used FLIP-FLOP (Frequency exchange) switch button is designed large enough to be pushed with ease. Adjustable audio level and squelch control functions are also featured.The IC-A220 also has a built-in voice-activated intercom function allowing the pilot to talk with the copilot via the headset. Additionally, the IC-A220 has 20 memory channels and 20 history memory channels respectively. Often used memory channels can be instantly recalled. Group memory channels are organized into 10 memory channels by five groups (total 50 channels). Weather channel scanning function searches for weather channel signals. When combined with the IC-A220, the optional PS-80 power supply provides a convenient base station operation on the ground.This version (Alternate Part# IC-A220M) includes an MB-53 vehicle mounting bracket, HM-176 microphone, and SP-35 external speaker. Bright and easy to read organic light-emitting diode (OLED) displayWide 170-degree viewing angle with auto dimmer functionThe "flip-flop" arrow button allows for easy channel switchingAuto stack memory makes it easier to recall the last 20 channels usedAutomatic or manual squelch operationBuilt-in DC-DC converter accepts a 12/24V DC power source fBuild-in, voice-activated intercom functionIndustry-standard, 25-pin D-sub connector20 regular memory channels with a 6-character channel name50 group memory channels (10 Ch x 5) groups with a channel tagAutomatic weather channel scanning and receive (USA version only)Dualwatch and priority functionsOne-touch access to 121.5 MHz emergency frequencySidetone function for monitoring your voice with headsetANL (automatic noise limiter) function reduces pulse-type noiseRemote control capabilityPC programming capabilityDial lock and panel lockTime-out timerD-sub 25-pin industry-standard connector for easy installationSlim 1.34 inch (34 mm) height can be installed in a limited panel spaceTwo types of menu mode: settings menu and configuration menuProduct CodesMfr Part No:IC-A220MECCN:5a991SCHEDULE B CODE:8525.60.1025Weight: 1.0 kg (2.2 lb) Dimensions: 160 x 34 x 271 mm (6.3 x 1.34 x 10.67 in) PS-80 Dimensions: 7.87 x 7.87 x 11.81 in (200 x 200 x 300 mm) PS-80 Current: 13.8 VDC at 6A output Power requirements: 13.8 VDC / 27.5 VDC (negative ground) Frequency Coverage: Tx/Rx: 8.33 kHz spacing; 118.000  to 136.992 MHz 25 kHz spacing; 118.000 to 136.975 MHz Rx Wx: 161.650 to 163.275 MHz Mode: AM (6K00A3E, 5K60A3E) Frequency spacing: 8.33 kHz/25 kHz Frequency stability: ±5 ppm Operating Temperatures: -20°C to 55°C Antenna Impedance: 50Ω No. of memory channels: 20 regular memory 50 group memory 10 GPS 10 Weather 20 auto stack memory TRANSMITTER Output Power: 8 watts typical (carrier power) Spurious Emissions: -60 dBc Modulation Limiting: 70% (maximum 98%) Microphone Impedance: 600Ω RECEIVER Intermediate Frequencies: 38.85 MHz/450 kHz (1st/2nd) Selectivity: 25 kHz spacing: ±3kHz/±22 kHz (6dB/60dB) 8.33 kHz spacing: ±2.778 kHz/±7.37 kHz (6 dB/60 dB) Spurious Rejection: more than 74 dBµ Audio Output Power: External SP: 5W with 4Ω load Headphone: 60 mW with 500Ω load..

VHF AIRBAND TRANSCEIVER/With PS-80 05 Base Station. 12-24VDC, OLED display, includes HM-176 hand microphone , microphone hanger bracket, power cord, MBA-3 rear panel adapter with a card edge connector. IC-A220BIC-A220 VHF Airband Transceiver | PS-80 Base StationThe IC-A220 VHF Airband Transceiver features an innovative, easy to read OLED display. It provides higher contrast, wider viewing angle of nearly 180 degrees, and faster response time than a conventional LCD. The most frequently used FLIP-FLOP (Frequency exchange) switch button is designed large enough to be pushed with ease. Adjustable audio level and squelch control functions are also featured.The IC-A220 also has a built-in voice-activated intercom function allowing the pilot to talk with the copilot via the headset. Additionally, the IC-A220 has 20 memory channels and 20 history memory channels respectively. Often used memory channels can be instantly recalled. Group memory channels are organized into 10 memory channels by five groups (total 50 channels). Weather channel scanning function searches for weather channel signals.When combined with the IC-A220, the optional PS-80 power supply provides a convenient base station operation on the ground.  The PS-80 includes built-in speaker and HM-176 hand microphone. This version (Alternate Part# IC-A220B) includes the PS-80 base station power supply for ground-based operations, HM-176 hand microphone, microphone hanger bracket, and power cord.Bright and easy to read organic light-emitting diode (OLED) displayWide 170-degree viewing angle with auto dimmer functionThe "flip-flop" arrow button allows for easy channel switchingAuto stack memory makes it easier to recall the last 20 channels usedAutomatic or manual squelch operationBuilt-in DC-DC converter accepts a 12/24V DC power source fBuild-in, voice-activated intercom functionIndustry-standard, 25-pin D-sub connector20 regular memory channels with a 6-character channel name50 group memory channels (10 Ch x 5) groups with a channel tagAutomatic weather channel scanning and receive (USA version only)Dualwatch and priority functionsOne-touch access to 121.5 MHz emergency frequencySidetone function for monitoring your voice with headsetANL (automatic noise limiter) function reduces pulse-type noiseRemote control capabilityPC programming capabilityDial lock and panel lockTime-out timerD-sub 25-pin industry-standard connector for easy installationSlim 1.34 inch (34 mm) height can be installed in a limited panel spaceTwo types of menu mode: settings menu and configuration menuProduct CodesMfr Part No:IC-A220BECCN:5A991SCHEDULE B CODE:8525.60.1050Weight: 1.0 kg (2.2 lb) Dimensions: 160 x 34 x 271 mm (6.3 x 1.34 x 10.67 in) PS-80 Dimensions: 7.87 x 7.87 x 11.81 in (200 x 200 x 300 mm) PS-80 Current: 13.8 VDC at 6A output Power requirements: 13.8 VDC / 27.5 VDC (negative ground) Frequency Coverage: Tx/Rx: 8.33 kHz spacing; 118.000  to 136.992 MHz 25 kHz spacing; 118.000 to 136.975 MHz Rx Wx: 161.650 to 163.275 MHz Mode: AM (6K00A3E, 5K60A3E) Frequency spacing: 8.33 kHz/25 kHz Frequency stability: ±5 ppm Operating Temperatures: -20°C to 55°C Antenna Impedance: 50Ω No. of memory channels: 20 regular memory 50 group memory 10 GPS 10 Weather 20 auto stack memory TRANSMITTER Output Power: 8 watts typical (carrier power) Spurious Emissions: -60 dBc Modulation Limiting: 70% (maximum 98%) Microphone Impedance: 600Ω RECEIVER Intermediate Frequencies: 38.85 MHz/450 kHz (1st/2nd) Selectivity: 25 kHz spacing; ±3kHz/±22 kHz (6dB/60dB) 8.33 kHz spacing; ±2.778 kHz/±7.37 kHz (6 dB/60 dB) Spurious Rejection: more than 74 dBµ Audio Output Power: External SP: 5W with 4Ω load Headphone: 60 mW with 500Ω load..

WIRELESS BELT STATION/Hands free, full duplex, voice activated intercom communication. DECT 6.0 based technology. Works with any 9900 wireless headset 40992G-01U9910-BSW Wireless Belt StationThe Series 9900 wireless intercom system is the perfect solution for wireless communications in demanding, high-noise environments such as airline and airport operations, fire and rescue applications, marine intercom, or any applications requiring robust, reliable and secure communications. The 9900 system is ideal for push-back operations, wing-walkers, marshaling agents, maintenance mechanics and de-icing operations. The 9900 wireless system consists of the push-back gateway, wireless belt stations, and any Series 9900 wireless headsets.The U9910-BSW is a voice-active, belt station that provides the wireless interface between the headset and a wireless gateway. Up to four belt stations can be linked to the a gateway via close-proximity linking. The status of the wireless link, radio/intercom PTT transmit, and battery charge is indicted by the bi-color LED which is located on the on/off/link button. A user replaceable, rechargeable Li-Polymer battery provides 24 hours of continual use.Provides a hand-free, full-duplex, and voice-activated intercom communicationsDECT 6.0 based technology provides secure signaling and prevents unwanted interceptions and eliminates cross talk with other systems or work groupsWorks with any Series 9900 Wireless HeadsetControls incorporate a power button used for close-proximity linking, a VOX adjustment used for mic control, and a large PTT switch used for override or radio PTT applicationsVOX “helper” tones assist users when setting up the optimal volume for any high-noise environments through the rotary switchIncluded black rubberized protective skin adds impact protectionVoice prompts inform the user about the wireless link statusMarine-grade, water-tight, impact-resistant enclosure provides rugged durability and reliability360° rotating belt clip provides versatile attachment and accessibility optionsA water-tight battery compartment holds the user replaceable, rechargeable Li-Polymer battery so that the belt station can stay in serviceProduct CodesMfr Part No:40992G-01ECCN:5A991SCHEDULE B CODE:8544490000TSO:C139 Hazmat charges may applyWeight: 10 oz (280 g), with battery Dimensions: 4 x 2-3/4 x 1-7/8 in, with belt clip Frequency: 1920 MHz -1930 MHz Average Power Output: 4mW (100 mW peak), typical Range: 100 m (300 ft) line-of-sight, typical Carriers: 5 each (1,728 kHz spacing) Time Slots: 2x12 (up and down stream) Operating Temperature: -10°C to 45°C Storage Temperature: -20°C to 60°C Power Source: Li-Polymer rechargeable 3.7V, 2,000mA battery Power Consumption: 100mA, typical..

WIRELESS GATEWAY/Fixed mounted wireless communication for use with 3800 series wired intercom systems. Includes whip antenna. 40995G-01WIRELESS GATEWAY/Fixed mounted wireless communication for use with 3800 series wired intercom systems. Includes whip antenna.Product CodesMfr Part No:40995G-01..

WIRELESS HEADSET/Dual ear, behind the head style. M-87 type dynamic noise cancelling microphone, dual volume control and 6' extended coil cord with military grade 7-pin belt station connector 40991G-01WIRELESS HEADSET/Dual ear, behind the head style. M-87 type dynamic noise cancelling microphone, dual volume control and 6' extended coil cord with military grade 7-pin belt station connectorThe H9940 dual-ear, marine-grade, wireless headset is designed to be worn under protective head gear with its behind-the-head style design. It provides excellent comfort, as well as clear and reliable communication. The H9940 can be used in extreme noise environments up to 125 dB. The 9900 Series headsets are designed to be used with the Series 9900 wireless belt stations and wireless push-back gateway. The Series 9900 Wireless Intercom System is the perfect solution for ground support communications in demanding, high-noise environments such as airline and airport operations, fire and rescue applications, or any application requiring robust, reliable, and secure communications. This system is ideal for push-back operations, wing-walkers, marshalling agents, maintenance mechanics, and de-icing operations. The 9900 wireless system consists of the push-back gateway, wireless belt stations, and any Series 9900 wireless headsets. Provides crisp and clear communication in demanding environments Marine-grade, stainless steel hardware for rust and corrosion resistance M-87 type dynamic microphone is noise canceling and immersion-proof Hybrid hinged wire/flex mic boom places microphone in the perfect position Dual Dynamic earphones with titanium nitride drivers and stainless steel retainers Water-tight, dual volume controls for independent left and right gain setting 6-feet extended coil cord with a military grade, 7-pin Belt Station connector Undercut, comfort-gel ear seals provide unsurpassed comfort and enhanced noise-attenuation Nylon overhead support assembly with hook and loop adjustment fits all head sizes Reversible hardware with 280 rotatable mic boom provide left or right microphone positioning Passive noise attenuating rating of 23 dB Product CodesMfr Part No:40991G-01..

WIRELESS HEADSET/Single ear, over the head style. M-2 dynamic noise cancelling microphone, wire flex mic boom, 6' extended coil cord with military grade 7-pin belt station connector H9990WIRELESS HEADSET/Single ear, over the head style. M-2 dynamic noise cancelling microphone, wire flex mic boom, 6' extended coil cord with military grade 7-pin belt station connector The H9990 single-ear, overthe-head style communications headset incorporates a noise-canceling, dynamic microphone that is optimized for extremely noisy environments up to 125 dB. With superlative performance and unsurpassed comfort, the H9990 is ideal for high noise environments and long work hours while providing ease of use and effective communication. The 9900 series headsets are designed to be used with the Series 9900 wireless belt stations and wireless push-back gateway. The Series 9900 Wireless Intercom System is the perfect solution for ground support communications in demanding, high-noise environments such as airline and airport operations, fire and rescue applications, or any application requiring robust, reliable, and secure communications. This system is ideal for push-back operations, wing-walkers, marshalling agents, maintenance mechanics, and de-icing operations. The 9900 wireless system consists of the push-back gateway, wireless belt stations, and any Series 9900 wireless headsets. Crisp and clear communication in demanding environments All hardware is marine-grade stainless steel for resistance to rust and corrosion in harsh marine environments M-2 dynamic microphone is water-resistant and provides superlative noise-cancellation Hybrid hinged wire/flex mic boom and a 280 rotational allows perfect microphone positioning Dynamic earphone with titanium nitride driver and stainless steel retainer Water-tight, volume control provides variable gain setting capability Six-foot extended coil cord with military-grade, 7-pin Belt Station connector Undercut, comfort-gel ear seal provides unsurpassed comfort and enhanced noise-attenuation Four-chamber, air-flow pillow head-pad offers long-term comfort and eliminates hot-spots No NRR (single-ear headset) Product CodesMfr Part No:H9990..