This insulation tester features excellent test voltage regulation, direct measurement readout, and an external guard terminal for eliminating surface leak current from the measurement. Ideal for general purpose testing, this tester is portable and self-contained and designed to give rapid and accurate measurements. The analog display has four selectable test voltages of 100, 250, 500, and 1,000 VDC for measuring insulation resistance up to 2,000 MΩ and has as ohm range to 5,000Ω.
This insulation tester (Alternate Part# 212159) features a hand-cranked power generator as its power source that is easy to turn even under full load situations. The accuracy remains unaffected by variations in generator cranking speed and test voltage is maintained at its rated value.
- No scale multipliers
- Multiple test voltages for spot and step voltage testing
- Guard terminal for eliminating surface leakage current
Product Codes | |
|---|---|
| Mfr Part No: | 212159 |
| ANSI: | IEC 61326-1 |
| ECCN: | EAR99 |
| SCHEDULE B CODE: | 9031.80.8080 |
Weight: 2.3 lb (1 kg)Dimensions: 5.1 x 4.9 x 7 in (130 x 125 x 180 mm)Temperature Range: 14°F to 133°FHumidity Range: 70% RH @ 68°F (20°C) 60% RH @ 95°F (35°C) 50% RH @ 105°F (40°C) 95% RH @ max. @ 95°F (35°C), StorageInsulation Range: 01Ω – 2,000ΩNominal Test Voltages: 100VDC, 250VDC, 500VDC, 1,000VDCAccuracy: 250V, 500V, 1,000V, +30%, -0% max. 50V, 100V,  +40%, -0% max.Resistance Range: 0.1Ω – 5,000ΩPower Supply: low voltage brushless AC generator, cranking speed between 130 rpm & 170 rpm (212159)Fuses: 500 mA (FF) 660V ceramic 50 kA HBC 1-1/4x1/4 in (32x6 mm) 7A (F) 440V ceramic 10 kA HBC 1-1/4x1/4 in (32x6 mm) 100 mA (F) HBC 20x5 mm (for line protection)Safety: meets requirements for double insulation to IEC 1010-1(1995), EN 61010(1995) to insulation category II, 300V phase to earth, 600V installation category I
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: 212159
