Out of Stock
Manufacturer Part #: 8610013220
Stock: Out of Stock
TUNING KNOB/INNER/A210 8610013220Inner Tuning Knob | A210 Panel Mount RadioThis knob (Alternate Part# 8610013220) is a replacement inner tuning knob for the A210 panel mount radio from Icom.Works with Icom's A210 panel mount radioProduct CodesMfr Part No:8610013220..
$0.00
Manufacturer Part #: FES KK-4
Stock: Warehouse
Tubing Mount, Fits 6mm Tubing, by Festo FES KK-4. Engine or accessory mount. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number FES KK-4 against your aircraft's illustrated parts ..
$5.99
Manufacturer Part #: FES KK-3
Stock: Warehouse
Tubing Mount, Fits 4mm Tubing, by Festo FES KK-3. Engine or accessory mount. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number FES KK-3 against your aircraft's illustrated parts ..
$5.99
Out of Stock
Manufacturer Part #: UTD 8130-B185
Stock: Out of Stock
True Airspeed Indicator, 3 1/8 inch 55-300 mph/ 60-260 knots, TSO UTD 8130-B185..
$1,547.15
Out of Stock
Manufacturer Part #: UTD 8130-B429
Stock: Out of Stock
True Airspeed Indicator, 3 1/8 inch 40-260 knots, TSO UTD 8130-B429..
$1,547.15
Out of Stock
Manufacturer Part #: UTD 8125-B267
Stock: Out of Stock
True Airspeed Indicator, 3 1/8 inch 40-210 knots, TSO UTD 8125-B267..
$1,547.15
Out of Stock
Manufacturer Part #: UTD 8100-B95
Stock: Out of Stock
True Airspeed Indicator, 3 1/8 inch 0-180 mph/ 155 knots, TSO UTD 8100-B95..
$1,547.15
Out of Stock
Manufacturer Part #: UTD 8125-B97
Stock: Out of Stock
True Airspeed Indicator, 3 1/8 40-240 mph/ 40-210 knots, TSO UTD 8125-B97..
$1,547.15
Out of Stock
Manufacturer Part #: CI-1120-300
Stock: Out of Stock
TRIPLEXER/For use with CI 295-300 SAR Antenna, 4 TNC Female Connector, 2 Hole Mount & a Nickel Plated Aluminum Finish. CI-1120-300CI 1120-300 SAR Triplexer / 136 - 174 MHz / 380 - 520 MHz / 764 - 870 MHzThe CI 1120-300 triplexer (CI-1120300) is specifically designed to operate with the CI 295-300 s..
$1,098.53
Manufacturer Part #: H23-1
Stock: Warehouse
TRIPLEXER/Dual VOR, single GS, (4) BNC Connector, 2 Hole Mount & a Black Finish. H23-1DM H23-1 Antenna Coupler | Dual VOR, Single GS, BNC ConnectorThe H series antenna couplers are designed are designed to couple multiple receiver systems to a single antenna with minimum insertion loss. These anten..
$539.99
Out of Stock
Manufacturer Part #: RK3027
Stock: Out of Stock
TRIPLE STACK TRAY MOUNT KIT RK3027. Engine or accessory mount. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number RK3027 against your aircraft's illustrated parts catalog (IPC) or..
$0.00
Manufacturer Part #: 065-00180-3500
Stock: Warehouse
TRIM SERVO/4.70 RPM 065-00180-3500KS 272C Trim Servo | 4.70 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-3500) is rated at 4.7 rpm.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe s..
$6,485.99
Manufacturer Part #: 065-00180-2700
Stock: Warehouse
TRIM SERVO/3.6 RPM 065-00180-2700KS 272C Trim Servo | 3.6 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-2700) is rated at 3.6 RPM.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe ser..
$5,137.09
Manufacturer Part #: 065-00180-0600
Stock: Warehouse
TRIM SERVO/14.58 RPM 065-00180-0600KS 272C Trim Servo | 14.58 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-0600) is rated at 14.58 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutch..
$10,631.99
Manufacturer Part #: 065-00180-0800
Stock: Warehouse
TRIM SERVO-8.2 RPM 065-00180-0800KS 272C Trim Servo | 8.20 RPMThe KS 272C Trim Servo is used for elevator trimming.
Version 065-00180-0800 is rated at 8.20 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe..
$9,107.99
Manufacturer Part #: 065-0061-36
Stock: Warehouse
TRIM SERVO 065-0061-36KS-272A Replacement Trim ServoThe KS-272A Trim Servo is a replacement for the KS-272 Servo (part# 065-0029-36). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Trim Servo used in KFC-200, KFC-250, and KFC-250A Autopilot SystemElectrically driven..
$19,151.99
Manufacturer Part #: 065-0061-04
Stock: Warehouse
TRIM SERVO 065-0061-04KS-272A Replacement Trim ServoThe KS-272A Trim Servo is a replacement for the KS-272 Servo (part# 065-0029-04). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Trim Servo used in KFC-200, KFC-250, and KFC-250A Autopilot SystemElectrically driven..
$17,393.99
Manufacturer Part #: 065-00061-0050
Stock: Warehouse
TRIM SERVO 065-00061-0050KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-50). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
$17,183.99
Manufacturer Part #: 065-00061-0022
Stock: Warehouse
Trim Servo 065-00061-0022KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-22). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System.Trim Servo used in KFC-200, KFC-250, and KFC-250A Autop..
$31,757.99
Manufacturer Part #: 065-00061-0013
Stock: Warehouse
TRIM SERVO 065-00061-0013KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-13). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
$13,566.46
Manufacturer Part #: 065-00061-0006
Stock: Warehouse
Trim Servo 065-00061-0006KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-06). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
$12,101.99
Manufacturer Part #: 065-00180-1400
Stock: Warehouse
TRIM SERVO - 22.0 RPM 065-00180-1400KS 272C Trim Servo | 22.0 RPMThe KS 272C Trim Servo is used for elevator trimming.
Version 065-00180-1400 is rated at 22.0 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutch..
$6,347.99
Manufacturer Part #: 065-00180-0400
Stock: Warehouse
TRIM SERVO - 2.40 RPM 065-00180-0400KS 272C Trim Servo | 2.40 RPMThe KS 272C Trim Servo is used for elevator trimming. Version 065-00180-0400 is rated at 2.40 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchT..
$7,793.99
Manufacturer Part #: 9-30-10
Stock: Warehouse
TRAY MOUNT RF ANTENNA CONNECTOR 9-30-10RF Antenna Connector | Tray MountThis blind, self-centering connector is helpful when an antenna needs to be mounted in a panel without rear access, such as in the cockpit of an aircraft. The 9-30-10 aligns and centers itself with its mating connector as the bo..
$35.33
Out of Stock
Manufacturer Part #: RK100
Stock: Out of Stock
TRAY MOD TOOL KIT RK100RK100 Tray Modification Tool KitThe RK100 tray modification tool kit provides a precise and efficient method for modifying avionic trays for ensuring proper mounting into the Radiorax offset rails. Simplifies avionic tray modification for proper fitProvides precision and effic..
$77.60
