SOLDER SLEEVE SHIELD TERMINATOR/Maximum temperature: +150 degrees Celsius,minimum shrink temperature: +125 degrees Celsius. D-101-00 pack of 100Solder Sleeve Shield Terminal | 0.018 – 0.200inSolder sleeve shield terminals provide a reliable method of terminating a wide variety of coaxial cables and screens. They can be used for wire-to-wire, wire-to-pin connections, and triaxial cable assemblies. STS are designed to solder, seal terminations, provide strain relief and are installed by the application of heat.  This shield terminal (Alternate Part# D-101-00) fits cables with a 0.018 – 0.200 inch jacket diameter. Meets NAS-1747 standards125°C minimum temperature ratingConvection or infrared installation procedureProduct CodesMfr Part No:D-101-00ECCN:EAR99SCHEDULE B CODE:8536.90.4000Cable Size: 0.018 – 0.200 in (4.55 – 5.00 mm) Insulation Material: Radiation cross-linked polyvinylidene fluoride Solder Preform (with Flux): Sn63 Pb37 solder alloy Thermal Indicator: violet Meltable Ring: Thermally stabilized thermoplastic Temperature Range: -55°C to 150°C..

100' LENGTH OF M27500-20TE2T14. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-20TE2T14M27500-20TE2T14 Extruded ETFE Tefzel Wire | 20 AWG, 2 ConductorSAE AS22759 wire is a fluoropolymer–insulated, single-conductor wire offering excellent performance for a variety of military aerospace and commercial applications. It has high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles as well as areas requiring overload stability, low smoke emission and fire resistance, such as aircraft cabins.M27500-20TE2T14 meets SAE AS22759/16 specifications and is designed for aerospace applications for commercial and military aircraft. It has a stranded tin-plated, copper conductor, Extruded ETFE dielectric, a rating of 600 volts and 150°C. This M27500-20TE2T14 extruded ETFE tefzel wire (Alternate Part# 20TE2T14) has two, tin-plated 20 AWG conductors with extruded ETFE insolation, a 150°C rating. Colored white.600 volt rating150°C temperature ratingExcellent thermal stabilityHigh reliabilityHigh break strength and flex lifeHigh abrasion resistanceProduct CodesMfr Part No:M27500-20TE2T14MIL SPEC:M27500-20TE2T14ECCN:EAR99MIL SPEC:M27500-20TE2T14SCHEDULE B CODE:8544110050AWG Size: 20 Conductor Stranding: 19/32 Number of Strands: 19 Strand Size: 32 Numbers of Conductors: 2 Outside Diameter: 0.0600 in, nominal Conductor Material: Tin-plated copper Insulation Material: Extruded Ethylene Tetrafluoroethylene (ETFE) Shield: Overall braid shield Shield Material: Tinned copper braid Shield coverage: 85% Jacket Material: Extruded Ethylene Tetrafluoroethylene (ETFE) Jacket Color: White Weight Approx: 19 lb/MFT Operating Temperature: 150°C, maximum Voltage: 600 volts NEMA Type: WC 27500 Mil-Spec: M27500/16..

100' LENGTH OF M27500-20TG2T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-20TG2T14M27500-20TG2T14 Extruded ETFE Tefzelâ„¢ Wire | 20 AWG, 2-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-20TG2T14 Tefzelâ„¢ wire (Alternate Part# 20TG2T14) meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 2-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-20TG2T14MIL SPEC:M27500-20TG2T14ECCN:EAR99MIL SPEC:M27500-20TG2T14SCHEDULE B CODE:8544110050SAE AS22759/18 SPECIFICATIONS: Gauge: 20 AWG Number of Strands: 19 Strand Size: 32 Outside Diameter (Insulation): 0.049 - 0.053 in Conductor Diameter: 0.038 in Weight: 4.60 LB/MFT Impedance (@ 20°C): 9.8 Ω/MFT, maximum Number of Conductors: 2, (20TG2T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG1T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG1T14M27500-22TG1T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 1-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG1T14 Tefzelâ„¢ wire (Alternate Part# 22TG1T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 1-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG1T14MIL SPEC:M27500-22TG1T14ECCN:EAR99MIL SPEC:M27500-22TG1T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 1, (22TG1T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG3T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG3T14M27500-22TG3T14 Extruded ETFE Tefzel Wire | 22 AWG, 3-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.This M27500-22TG2T14 Tefzelâ„¢ wire (Alternate Part# 22TG3T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 3-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG3T14MIL SPEC:M27500-22TG3T14ECCN:EAR99MIL SPEC:M27500-22TG3T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 3, (22TG3T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14) – Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG4T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG4T14M27500-22TG4T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 4-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG4T14 Tefzelâ„¢ wire (Alternate Part# 22TG4T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG4T14MIL SPEC:M27500-22TG4T14ECCN:EAR99MIL SPEC:M27500-22TG4T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 4, (22TG4T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

21070090036 YETI RAMBLER 12OZ COLSTER SLIM CAN INSULATOR SS 21070090036..

21070090048 YETI RAMBLER 16OZ TALL CAN INSULATOR SS 21070090048..

21070090060 YETI RAMBLER 12OZ COLSTER CAN INSULATOR SS 21070090060..

22GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-22(19)-TT-F Q100-22(19)-TT-F pack of 100022GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-22(19)-TT-F DataMaster Q100 series cable has a four-connector "Quadrax" design offering 1000 Base T ethernet support and Cat 5e performance. These lightweight and small cables are designed specifically for high speed airborne data applications. The lightweight Q100 Data Quad cables are ideal for in-flight entertainment systems. Stable electrical performance supporting 1000 base T Ethernet Cat5e performance Lightweight and small size for high speed data applications Silver plated copper and copper alloy conductors with tin or silver plated copper braids Non-shrinkback insulation terminates easily and fits standard connectors 1000 Base T Cat 5e performance 100 Ohm and 150 Ohm impedances are standard and temperature rated at 150C and 200C Four conductor quadrax design Proprietary fluropolymer insulation Fluropolymer tape binder Flat TPC inner braid and round wire TPC outer braid SPC and other shield configurations available FEP jacket (laser markable ETFE and PFA available) Supports Gigabit Ethernet, FDDI, USB, and 1397 standards Product CodesMfr Part No:Q100-22(19)-TT-FSCHEDULE B CODE:8544.19.0000..

22GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-22(19)-FS/F 1E100-22(19)-FS/F pack of 100022GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-22(19)-FS/F DataMaster twisted pair aerospace cable streamlines communication between various electronic components and avionic units in commercial, military, and military ground vehicles. These composite cables have been designed for minimal insertion loss and superior protection against EMI and RFI. DataMaster cables are designed to meet the FAA, ARINC, military, and industry electrical requirements. Applications include in-flight entertainment systems, cabin management systems, USB and VGA multimedia, standard definition video, and HDTV. 100 ohm and 150 ohm impedances are standard with a typical frequency range from 10 to 1,000 MHz One through four pairs and composite designs Proprietary fluropolymer insulation 150, 100, 90, and 77 ohm designs Round wire braids, tin and silver FEP jacket (laser markable ETFE and PFA available) All cables comply with RoHS and REACH directives Cables pass FAR 25.853, Airbus ABD0031, and Boeing smoke and toxicity requirements Product CodesMfr Part No:1E100-22(19)-FS/FSCHEDULE B CODE:8544.19.0000..

24G 4C/POLY JACKET/COILED CIK15244SU. Engine ignition coil or solenoid. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number CIK15244SU against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

24G 4C/RUBBER JACKET/COILED CIK15244SR. Engine ignition coil or solenoid. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number CIK15244SR against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

24GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-24(19)-TT-F Q100-24(19)-TT-F pack of 100024GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-24(19)-TT-F DataMaster Q100 series cable has a four-connector "Quadrax" design offering 1000 Base T ethernet support and Cat 5e performance. These lightweight and small cables are designed specifically for high speed airborne data applications. The lightweight Q100 Data Quad cables are ideal for in-flight entertainment systems. Stable electrical performance supporting 1000 base T Ethernet Cat5e performance Lightweight and small size for high speed data applications Silver plated copper and copper alloy conductors with tin or silver plated copper braids Non-shrinkback insulation terminates easily and fits standard connectors 1000 Base T Cat 5e performance 100 Ohm and 150 Ohm impedances are standard and temperature rated at 150C and 200C Four conductor quadrax design Proprietary fluropolymer insulation Fluropolymer tape binder Flat TPC inner braid and round wire TPC outer braid SPC and other shield configurations available FEP jacket (laser markable ETFE and PFA available) Supports Gigabit Ethernet, FDDI, USB, and 1397 standards Product CodesMfr Part No:Q100-24(19)-TT-FSCHEDULE B CODE:8544.19.0000..

24GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-24(19)-FS/F 1E100-24(19)-FS/F pack of 100024GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-24(19)-FS/F DataMaster twisted pair aerospace cable streamlines communication between various electronic components and avionic units in commercial, military, and military ground vehicles. These composite cables have been designed for minimal insertion loss and superior protection against EMI and RFI. DataMaster cables are designed to meet the FAA, ARINC, military, and industry electrical requirements. Applications include in-flight entertainment systems, cabin management systems, USB and VGA multimedia, standard definition video, and HDTV 100 ohm and 150 ohm impedances are standard with a typical frequency range from 10 to 1,000 MHz One through four pairs and composite designs Proprietary fluropolymer insulation 150, 100, 90, and 77 ohm designs Round wire braids, tin and silver FEP jacket (laser markable ETFE and PFA available) All cables comply with RoHS and REACH directives Cables pass FAR 25.853, Airbus ABD0031, and Boeing smoke and toxicity requirements Product CodesMfr Part No:1E100-24(19)-FS/FSCHEDULE B CODE:8544190000..

24GA/GIGIBIT ETHERNET CABLE/4E100-24(19)-FS/F 4E100-24(19)-FS/F pack of 100024GA/GIGIBIT ETHERNET CABLE/4E100-24(19)-FS/F DataMaster gigabit ethernet cable is a 10 gigabit solution to provide future-proof headroom for demanding aerospace applications. The DataMaster Aero series cables exceed expectations for performance, flexibility, ease of termination and low weight. The Aero series ethernet cables are ideal for use with in-flight entertainment systems, military and commercial avionic, and cabin management systems. Highly durable cables are perfect for a wide range of demanding data applications Reduces crosstalk and eliminates the need for individual pair shielding Applications: in-flight entertainment systems, cabin management systems, ethernet backbone avionics, and ground vehicle trunk and bus Four pair cable design Proprietary fluropolymer insulation Fluroplumer tape binding Aluminum inner shield Round wire outer braid FEP Jacket (laser markable ETFE and PFA available) 10 Gigabit allows future-proof signal headroom Impedance 100.015 ohms All cable comply with RoHS and REACH directives Cables pass FAR 25.853, Airbus ABD0031, and Boeing Smoke and Toxicity requirements Product CodesMfr Part No:4E100-24(19)-FS/FSCHEDULE B CODE:8544.19.0000..

26GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-26(19)-TT-F Q100-26(19)-TT-F pack of 100026GA/100 BASE-T SHIELDED QUAD ETHERNET CABLE/Q100-26(19)-TT-F DataMaster Q100 series cable has a four-connector "Quadrax" design offering 1000 Base T ethernet support and Cat 5e performance. These lightweight and small cables are designed specifically for high speed airborne data applications. The lightweight Q100 Data Quad cables are ideal for in-flight entertainment systems. Stable electrical performance supporting 1000 base T Ethernet Cat5e performance Lightweight and small size for high speed data applications Silver plated copper and copper alloy conductors with tin or silver plated copper braids Non-shrinkback insulation terminates easily and fits standard connectors 1000 Base T Cat 5e performance 100 Ohm and 150 Ohm impedances are standard and temperature rated at 150C and 200C Four conductor quadrax design Proprietary fluropolymer insulation Fluropolymer tape binder Flat TPC inner braid and round wire TPC outer braid SPC and other shield configurations available FEP jacket (laser markable ETFE and PFA available) Supports Gigabit Ethernet, FDDI, USB, and 1397 standards Product CodesMfr Part No:Q100-26(19)-TT-FSCHEDULE B CODE:8544.19.0000..

26GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-26(19)-FS/F 1E100-26(19)-FS/F pack of 100026GA/100 BASE-T TWISTED PAIR ETHERNET CABLE/1E100-26(19)-FS/F DataMaster twisted pair aerospace cable streamline communication between various electronic components and avionic units in commercial, military, and military ground vehicles. These composite cables have been designed for minimal insertion loss and superior protection against EMI and RFI. DataMaster cables are designed to meet the FAA, ARINC, military, and industry electrical requirements. Applications include in-flight entertainment systems, cabin management systems, USB and VGA multimedia, standard definition video, and HDTV. 100 ohm and 150 ohm impedances are standard with a typical frequency range from 10 to 1,000 MHz One through four pairs and composite designs Proprietary fluropolymer insulation 150, 100, 90, and 77 ohm designs Round wire braids, tin and silver FEP jacket (laser markable ETFE and PFA available) All cables comply with RoHS and REACH directives Cables pass FAR 25.853, Airbus ABD0031, and Boeing smoke and toxicity requirements Product CodesMfr Part No:1E100-26(19)-FS/FSCHEDULE B CODE:8544.19.0000..

26GA/GIGIBIT ETHERNET CABLE/4E100-26(19)-FS/F 4E100-26(19)-FS/F pack of 100026GA/GIGIBIT ETHERNET CABLE/4E100-26(19)-FS/F DataMaster gigabit ethernet cable is a 10 gigabit solution to provide future-proof headroom for demanding aerospace applications. The DataMaster Aero series cables exceed expectations for performance, flexibility, ease of termination and low weight. The Aero series ethernet cables are ideal for use with in-flight entertainment systems, military and commercial avionics, and cabin management systems. Highly durable cables are perfect for a wide range of demanding data applications Reduces crosstalk and eliminates the need for individual pair shielding Applications: in-flight entertainment systems, cabin management systems, ethernet backbone avionics, and ground vehicle trunk and bus Four pair cable design Proprietary fluropolymer insulation Fluroplumer tape binding Aluminum inner shield Round wire outer braid FEP Jacket (laser markable ETFE and PFA available) 10 Gigabit allows future-proof signal headroom Impedance 100.015 ohms All cable comply with RoHS and REACH directives Cables pass FAR 25.853, Airbus ABD0031, and Boeing Smoke and Toxicity requirements Product CodesMfr Part No:4E100-26(19)-FS/FSCHEDULE B CODE:8544.19.0000..

4450/COAX/REV C UNIVERSAL SPEC, 50 OHM,TEMP.RATING -55C TO +200C, STRANDED CENTER CONDUCTOR. RG-58C/U pack of 1000RG-58C/U Coaxial CableRG58C/U coaxial cable is lightweight, flexible, and suitable for aerospace, avionics, and ordnance equipment applications.This RG-58C/U (Alternate Part# RG-58C/U-1) is 100 feet of coax cable.Operating frequency: 0.05 GHz to 1 GHz Product CodesMfr Part No:RG-58C/UECCN:EAR99SCHEDULE B CODE:8544.19.0000Weight: 24 lb per 1,000 ft Conductor: Quantity: 1 RG Type: 58C/U Gauge: 20 AWG Stranding: 19/32 Diameter: 0.032 Material: Tin-plated copper Insulation: Material: Solid Polyethylene Diameter: 0.116 in Outer Shield: Type: braided Layer 1 Material: Tinned copper Coverage: 95% Outer Jacket Material: RoHS Compliant PVC Overall Nominal Diameter: 0.196 in Temperature: -20°C to 80°C (operating) 80°C (UL rating) Pulling Tension: 50 lb, maximum Bend Radius: 2.0 in Impedance: 50Ω, nominal Operating frequency: 0.05 GHz to 1 GHz ..