The dual antenna rack mount amplified GPS splitter receives two antenna inputs and splits GPS into 32 isolated outputs with only -2 dB maximum signal loss. This GPS slitter covers the entire L1 & L2 bands with excellent gain flatness. Normally, this splitter is powered by a transformer that supplies power to the splitter's amplifier and root antenna. The outputs are blocked with a 200Ω resistor to simulate antenna current draw. This two-input and 32-output is suited to aid in timing and testing applications where the GPS carrier signal is required by up to 32 GPS devices simultaneously.
- Two antenna input allows for dual antenna
- Less than 1ns flat group delay
- High isolation between adjacent ports (>35 dB)
- Phase matched outputs (phase J1 – J2 < 1.0°)
AI disclosure: this description was generated with AI assistance from this product's own listing data.
Product Codes | |
|---|---|
| Mfr Part No: | NHIDRMALDCBS2X32-T/5/MC |
Weight: 16 lbDimensions: 5.4 x 18 x 17 inOperating Range: -40°C to 75°CFrequency Range: 1.1GHz — 1.7 GHz (Ant – any output, unused outputs - 50Ω)In/Out Impedance: 50Ω (Ant, J1, J2, J3, J4, J5, J6, J7, J8)Gain: 13dB – 15dB (14dB typical)Gain-High Isolation: -2.0dB — 2.0 dB (Ant – any output, unused outputs - 50Ω)Input SWR: 2.0:1, max. (all ports @ 50Ω)Output SWR: 1.3:1 max. (all ports @ 50Ω)Noise Figure: 3.8dB typical (4.3dB max.)Gain Flatness: 0.5 dB typical (1 dB max.)Amplitude Balance: 0.5 dB max. (| J1 – J2 | ; Ant – any output, unused outputs - 50Ω)Phase Balance: 1.0dB max. (Phase (J1 – J2) ; Ant – any output, unused outputs - 50Ω)Isolation: 35dB min.Group Delay Flatness: 1 ns (Td,max - Td,min : Ant – J1, J2 - 50Ω ; Ant – J2, J1 - 50Ω)Current: 15 mA (amplifier current draw @ 50Ω)Source Voltage Option: 9 VDC — 32 VDC military connector (customer supplied)Output Voltage Option: 5 VDC @ 110 mAOutput Port Isolation: 35 dB, min. (high isolation)Pass/Block DC Option: DC blocked (Jx (x=1...32) is DC blocked, Pass DC to ANT.)RF Connector Option: TNC connector
- Stock: Out of Stock
- Manufacturer Part #: NHIDRMALDCBS2X32-T/5/MC
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
