TACHOMETER TESTER RPM READOUT/230 VAC. Includes power cord. 230020-7
TACHOMETER TESTER RPM READOUT/230 VAC. Includes power cord. 230020-7Model 1790 Tachometer Tester | 220VAC, RPM Readout
The Model 1790 Tachometer Tester is used for testing and calibration of electrical and mechanical tachometer generators and indicators. A high-quality DC motor is coupled directly to a 1/4-inch square hole drive (AN Pad). This tachometer tester output can be converted to a wide variety of adapters and different tachometer interfaces. The motor drive control circuit uses SCR components and an open loop system for an economical solution to speed adjustment. The control panel consists of a five-digit LED display, momentary switches for start and stop, a direction switch, a display select switch, and a ten-turn potentiometer for speed adjustment.
Version (MFR# 230020-7) includes a RPM readout and operates on 230 VAC.
- 250 - 10,000 RPM Tachometer Testing Range
- 250 - 5,000 RPM Actual Drive Speed
- 1 RPM Accuracy of Digital Display
- Bright Red 5-Digit Display
- Maximum Torque: 60 oz-in
- Low Cost
- direct-drive
- Bi-directional
- Ten-turn Speed Adjustment
- Optional Calibration Kit Available
Product Codes | |
|---|---|
| Mfr Part No: | 230020-7 |
| ECCN: | 7B994 |
| SCHEDULE B CODE: | 9031.80.8080 |
Weight: 36 lbDimensions: 12.7 x 12 x 8.1 inDrive type: Permanent magnet DC motorMaximum torque: 60 oz-in.Drive outlet: 1/4 inch square hole (AN Pad)Shaft speed range: Infinitely variable within 250 - 5,000 RPM bi-directionalIndicator speed range: 250 - 5,000 RPM (1x setting) 500 - 10,000 RPM (2x setting)Operating temperature: 40º to 90º F (4º to 32º C)
- Stock: Warehouse
- Manufacturer Part #: 230020-7
$7,226.50
Tags:
tachometer
, tester
, rpm
, readout/230
, vac.
, includes
, power
, cord.
, 230020-7
, equipments
, 1790-230
