ALLIGATOR TEST CLIP/Black, large, insulated, shrouded banana jack. CT2392A-0 ALLIGATOR TEST CLIP / Black ALLIGATOR TEST CLIP / Black, large, insulated, shrouded banana jackProduct CodesMfr Part No:CT2392A-0..

BNC ADAPTER/5mm/for High Performance and GE Series Advanced Technologies Oscilloscope Probe/Sold in Packages of 10 CT2708 BNC ADAPTER/5mm/for High Performance and GE Series Advanced Technologies Oscilloscope Probe/Sold in Packages of 10 BNC ADAPTER/5mm/for High Performance and GE Series Advanced Technologies Oscilloscope Probe/Sold in Packages of 10Product CodesMfr Part No:CT2708..

RE-RADIATING SYSTEM/GPS L1 networked variable gain portable, with LCD display and push button control. VGLCDPNRRKIT-TNC/0/MCVariable gain portable networked re-radiating kit with LCD | TNC Connectors, 9VDC—32VDC Ouput VoltageThis variable gain portable networked re-radiating kit is designed to re-distribute GPS signals where an L1 antenna is already in use. Portable re-radiating kits consists of a re-radiating antenna, an amplifier with external power supply for powering the entire system. In the standard networked configuration, the re-radiating amplififer output J1 is DC blocked while the antenna port receives RF signal and passes DC voltage back to power an active antenna.  Custom gain, DC power, and connector configurations are available. This portable GPS re-radiating kit (Alternate Part# VGLCDPNRRK) features variable gain with LCD display, TNC connectors,  and 9 VDC — 32 VDC MIL-DTL-5015 10SL source power. Re-radiating amplifier with external power supply: 30 dB typical gainOption mounting kit hardwareOptional variable gain amplifier: adjustable from 1 dB — 25 dBOptional variable gain amplifier with LCD: adjustable from 1 dB — 30 dBProduct CodesMfr Part No:VGLCDPNRRKIT-TNC/0/MCRe-Radiating Antenna: Weight: 1.7 oz (48 g) Dimensions: 0.67 x 2.6 x 2.6 in Operating Temperature: -40°C to 85°C Frequency: 1.572 GHz — 1.578 GHz Axial Ratio: 3 dB, max. Peak Gain: 4 dBic Bandwidth: 20 MHz, min. Input SWR: 1.5:1, max. Characteristic Impedance: 50Ω   Re-Radiating Amplifier Weight: 9.9 oz (281 g) Dimensions: 1.25 x 3.25 x 2.5 in, max. (not including connectors) Operating Temperature: -57°C to 87°C Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Req. DC Input V.: 3.3 VDC — 15 VDC Current Draw: 36 mA, typical (40 mA, max.) Gain: 29 dB — 31 dB (30 dB, typical) Input SWR: 2.0:1 Output SWR: 2.0:1, max. (1.8:1, typical) Noise Figure: L1: 2.0 dB L2: 4.25 dB Band Gain Flatness: 0.5 dB, typical (1 dB, max.) Group Delay: L1: 1.5 ns L2: 2.0 ns Reverse Isolation: L1: -55 dB L2: -60 dB Input P1dB: L1: -21.5 dBm L2: -23 dBm 3rd Order Intercept: -13 dBm Source Voltage Option: 9 VDC — 32 VDC, user supplied (MIL-DTL-5015 10SL Two-Pin DC Connector) Source Option: custom Connector Option: TNC type..

-34S-0001 / 67 PINS & CONNECTO (P/N: DPXBNA-67M). Aircraft pin or fastener pin. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number DPXBNA-67M against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

0.250 WIDE BAND APPLICATION TOOL, M81306/2-01A, TWO-STEP DBS-1100Two-Step Band Application Tool | 0.250 Wide, M81306/2-01AThe DBS-1100 is a Two-Step Banding Tool designated for M85049/128- 1, M85049/128-2, M85049/128-5 and M85049/128-6 “welded buckle” bands. This tool tensions and cuts the band and leaves an extended cut off tab. The cut-off tab can then be rolled over a full 180 degrees.Tensions and cuts bandLeaves extended cut-off tabCut-off roll-over provides extra level of security0.250 in. wide band applicationCompatible with M85049/128- 1, M85049/128-2, M85049/128-5 and M85049/128-6 welded buckle bandsProduct CodesMfr Part No:DBS-1100  ..

1 INCH MOUNTING BAR/For Panel Pro 5-0004-4APanel Pro Mounting Bar / 1 inchOne-inch mounting bar for Panel Pro 5925.Product CodesMfr Part No:5-0004-4AECCN:2B991SCHEDULE B CODE:8429.61.0080..

1.25 LC IBC SINGLE FIBER OPTIC CLEANER 93931.25 mm LC Single Fiber Optic Cleaning Tool | LC & MU Connection TypesFiber optic pin and socket connector cleaners are mechanical cleaning tools designed to clean connectors residing in an adapter or faceplate and unmated connectors. These cleaning tools use a dry cleaning strand to gently sweep and lift away dust and residues from the connector end face. A simple pushing motion engages the tool followed by an audible click informs the user when the tool is fully engaged. This 1.25 mm fiber end face cleaning tool (Alternate Part# 9393) cleans LC & MU connector types.Simple push motion engages the toolAudible click sound alerts the operator when full engagedLanyard attached dust cap prevents lost capsProvides over 525 cleaning cycles per toolNon-fraying cloth designRoHS compliant Effectively removes the following contaminates:Arizona Road Dust (ISO 12103-1)Skin oil residueSalt water residueAlcohol residueVegetable residueHand lotionDistilled water residueGraphiteT-shirt lintProduct CodesMfr Part No:9393Style: push style port cleaner Connector Type: LC, MU Cleaning Function: In Situ or Unmated Cable Assembly Ferrule Size: 1.25 mm Number of Cleaning Actuations: over 525..

1/16 7X7 STAINLESS STEEL ORANGE COATED 3/32 GROUNDING CABLE CAB-1/16SS1/16 7X7 STAINLESS STEEL ORANGE COATED 3/32 GROUNDING CABLE1/16 7X7 STAINLESS STEEL ORANGE COATED 3/32 GROUNDING CABLEProduct CodesMfr Part No:CAB-1/16SSSCHEDULE B CODE:0000000000..

10 AMP DIGITAL LOW RESISTANCE OHMMETER DLRo10HDDLRO10HD 10 Amp Digital Low Resistance OhmmeterThe DLRO10HD digital low resistance ohmmeter is designed for measure low resistant values in applications ranging from railways and aircraft. This ohmmeter features an internal rechargeable battery to allow operation in a laboratory, workshop,  or in the field. It can also operation from a mains power supply, even if the battery has run out.Rugged case well suited to transportation with shoulder strap and lead set pouch„Removable lid facilitates easy test lead connection„Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements„7 Ah lead acid battery provides extended operation and can be charged whilst operating from mains power„Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes„Large, clear LCD display with backlight and contrast adjustment„Auto power off function conserves batteryProduct CodesMfr Part No:DLRo10HDWeight: 6.7 kg Case Dimensions: 315 x 285 x 181 mm Display: Main display 5 digit plus 2x5 digit secondary display Temperature: -10°C to 50°C, operational -25°C to 60°C, storage Battery Type: 6V, 7Ah sealed lead acid Voltage Input Range: 100V – 240V, 50/60Hz, 90VA Charge Time: 8 hours Backlight: LED backlight Auto Power Off: 300 seconds Mode Selection: Left rotary switch Range Switch: Right rotary switch IP Rating: IP65 with lid closed IP54 during battery operation Safety: IEC61010-1, CAT 300V when used with terminal cover EMC: IEC61326-1..

100 MHZ SCOPE PROBES CT2674A100 MHZ SCOPE PROBESCal Test Electronics' most popular replacement probe. Its 100MHz bandwidth (10x position) allows it to work with all types of general purpose oscilloscopes. The REF position on the thumb switch quickly provides ground point referencing.The probe is supplied in a convenient clear plastic pouch along with a full complement of accessories. Attenuation selection - 1x/10x/REF Wide compensation adjustment in BNC box Meets IEC61010-031 CATI @ 600V Accessories included: 15cm Ground Lead, Replacement Tip, Black Snap-on Sprung Hook, Tip Insulator, IC Tip, BNC Adapter, Probe Tip Ground, Trimmer Tool, & Coding Rings.Product CodesMfr Part No:CT2674AECCN:EAR99SCHEDULE B CODE:9030908010..

1010 MICRO CASE/Red with clear lid, Includes: Rubber Liner, Stainless Steel Hardware and Carabiner, Interior Dimensions: 4.37 x 2.87 x 1.68, Exterior Dimensions: 5 7/16 x 4 1/6 x 2 1/8, Water Resistant, Crushproof, and Dust Proof 1010-028-1001010 Micro Case | Red with Clear Lid, Includes Rubber LinerThe 1010 Micro Case is ideal for protecting small sensitive electronic components, such as cellphones, for the elements. The 1010 Micro Case is crush proof, watertight, and dust-proof.Interior: 4.4 x 2.9 x 1.7 inCase is able to be submerged under 1 meter of water for up to 30 minutes in accordance with IP67 testing parametersAvailable in clear with color liner or solidWatertight, crushproof, and dust-proofRubber liner for extra protection doubles as o-ring sealEasy open latchCarabinerStainless steel hardwareProduct CodesMfr Part No:1010-028-100Weight: 0.41 lb (0.2 kg), with foam 0.40 lb (0.2 kg), no foam Dimensions: Internal: 4.37 x 2.87 x 1.68 in (11.1 x 7.3 x 4.3 cm) External: 5.88 x 4.06 x 2.12 in (14.9 x 10.3 x 5.4 cm) Lid Depth: 0.69 in (1.8 cm) Bottom Depth: 0.94 in (2.4 cm) Total Depth: 1.63 in (4.1 cm) Internal Volume: 0.01 ft³ (0 m³) Buoyancy: 0.51 lb (0.2 kg) Body Material: Polycarbonate Latch Material: Xylex O-ring Material: Thermoplastic Rubber Pin Material: Stainless Material: Foam Material: Tl - 426 4 lb Easter Temperature Range: -10°C to 199°C (-23°F to 93°C)..

1060 MICRO CASE/Clear case with blue liner, Includes: Rubber Liner, Stainless Steel Hardware and Carabiner, Interior Dimensions: 8.25 x 4.25 x 2.25, Exterior Dimensions: 9 3/8 x 5 9/16 x 2 5/8, Water Resistant, Crushproof, and Dust Proof 1060-026-1001060 Micro Case | Clear Case, Blue LinerThe 1060 Micro Case is designed to protect cell phones, iPods, cameras, and other small items and electronics. These cases are manufactured with durable polycarbonate resin with a water-resistant rubber liner and a shock-absorbing insert liner.Water resistant, crushproof, and dust proofEasy open latchRubber liner for extra protection doubles as o-ring sealAutomatic Pressure Equalization Valve - balances interior pressure, keeps water outStainless steel hardwareCarabinerLifetime Guarantee of ExcellenceAvailable in clear with color liner or solidProduct CodesMfr Part No:1060-026-100ECCN:EAR99SCHEDULE B CODE:3923.10.0000Weight: 1.03 lb (0.5 kg), with foam 1.00 lb (0.5 kg), no foam Dimensions: Internal: 8.25 x 4.25 x 2.25 in (21 x 10.8 x 5.7 cm) Exterior: 9.38 x 5.56 x 2.63 in (25.1 x 14.2 x 6.7 cm) Lid Depth: 0.69 in (1.8 cm) Bottom Depth: 1.44 in (3.7 cm) Total Depth: 2.13 in (5.4 cm) Internal Volume: 0.05 ft³ (0.001 m³) Buoyancy: 2.49 lb (1.1 kg) Body Material: Polycarbonate Latch Material: Xylex O-ring Material: Thermoplastic Rubber Foam Material: TL-426 4 lb Esther Temperature Range: -10°F to 199°F (-23°C to 93°C)..

1210 PIDG CRIMP HEAD (P/N: 679300-1). Aviation crimp connector or crimp die. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 679300-1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

1270VS CALIBRATION KIT 230005-50. FAA-approved aircraft parts kit. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 230005-50 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

1291BL-24-SR64 SINGLE-AXIS TABLE SYSTEM 231150-23. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 231150-23 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

14.2VDC POWER SUPPLY 53050(12V). FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 53050(12V) against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

15 MONTH ACCURACY/For ADTS-542F E3. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number E3 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

1510 LAP TOP OVERNIGHT CASE/Black, Interior Dimensions: 19.75 x 11 x 7.6/Exterior Dimensions: 22 x 13.81 x 9/watertight, crushproof and dust proof/retractable handle/o-ring seal/automatic pressure equalization valve/stainless steel hardware 1510-006-110..

1520 CASE with 1527 TRAVEL BAG/Black, Interior Dimensions: 18.06 x 12.89 x 6.72, Exterior Dimensions: 19.78 x 15.77 x 7.41, watertight, crush proof and dust proof, o-ring seal, automatic pressure equalization valve, pick n' pluck with convoluted lid foam 1520-007-110..

1520 CASE with 1527 TRAVEL BAG/Orange, Interior Dimensions: 18.06 x 12.89 x 6.72, Exterior Dimensions: 19.78 x 15.77 x 7.41, watertight, crush proof and dust proof, o-ring seal, automatic pressure equalization valve, pick n' pluck with convoluted lid foam 1520-007-150..