Out of Stock - On Backorder
TRANSDUCER/FUEL FLOW/160 GPH 660534HS-00
TRANSDUCER/FUEL FLOW/160 GPH 660534HS-00FUEL FLOW TRANSDUCER/Flow rate: 7-160 GPH
The 660534HS fuel flow transducer mounts to the engine fuel line and produces electrical signals that represent the fuel flow. The transducer body has hydraulic fittings that connect directly to the engines fuel line, and a small turbine wheel mounted inside with two precision ball bearings driven by the flowing fuel which incorporate a small magnet that is picked-up by a hall-effect sensor. Transducers based on hall effect technology can operate over a broader range of flow rates and in high temperature environments. This transducer also includes an integrated RTD temperature sensor.
Product Codes | |
|---|---|
| Mfr Part No: | 660534HS-00 |
In/Out Fitting: 3/4-16UNF-3A 37° Flare (SAE5309-8 or equivalent)Maximum Line Pressure: 2000 PSIGMounting Screws: 10-32 x 0.5 in (qty 4)Mounting Hole Spacing: 0.80 in square pattern, 0.187 diameterMounting Position: allWeight: 11 ozElectrical:Transducer Supply Voltage: 4.0 to 29 VDC, regulated powerSupply Current: 20 mA, maximumProtection: not internally fusedConnector: MS27505T9B35P on transducerConnector Mate: MS27467T9B35S with backshell M85049/49-2S8W or equivalentOutput Type: open/GNDOpen Circuit Voltage: 24 VDC, maximumExternal Pull-up Resistor: sized to limit current to no more than 15 mAFuel Flow (Performance parameters nominal for Jet Fuel at 20° Celsius):Flow Rate: 7 – 160 GPHK-Factor: 9,000 – 10,000 Pulses per Gallon (PPG) at 70 GPHOutput Type: pulsePressure Drop at 160 GPH: rotor free = 3.0 PSI rotor locked = 6.5 PSITemperature (non-TSO function):Sensor Type: Platinum Resistance Temperature Detector (RTD)Temperature: -55°C - 150°CSensor Output: 1kΩ, typical at 0°CScaling: 3.8Ω/°C, nominalAccuracy to Fuel Temperature: ±5°C (at steady state)
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: 660534HS-00
$2,513.99
