Menu
Your Cart

TRIM SERVO/3.6 RPM 065-00180-2700

TRIM SERVO/3.6 RPM 065-00180-2700
TRIM SERVO/3.6 RPM 065-00180-2700
TRIM SERVO/3.6 RPM 065-00180-2700
KS 272C Trim Servo | 3.6 RPM

The KS 272C Trim Servo is used for elevator trimming. This unit (00180-2700) is rated at 3.6 RPM.


  • Contains a servo motor with amplifier and an engage clutch solenoid
  • Is installed with a KM 275 servo mount, which contains a slip clutch
  • The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitude of the command
  • The command polarity will determine direction of the servo rotation
  • The command inputs have an impedance of at least 15K ohms

Product Codes

Mfr Part No:065-00180-2700
SCHEDULE B CODE:9014.20.4000
TSO:C9c


Weight: 2.1 lbDimensions: 3.925 x 4.675 x 4.605 inMounting: Two (2) AN 3 boltsPower Inputs: +28VDC at 4.0 ampsClutch Engage Signal: +28VDC (active high input) and Ground (active low input)Mating Connector: 030-03248-0000Signal Inputs: -10VDC to +10VDCSignal Outputs: Trim Voltage: -28VDC to +28VDC Trim Sense: -3VDC to +3VDC

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Warehouse
  • Manufacturer Part #: 065-00180-2700
$6,359.99

Find Parts by Aircraft