3-1/8 ROUND HOLE PUNCH 730TBB

The Greenlee Round Hole Punches makeinstrument hole cutting for 1", 2-1/4" and 3-1/8"holes quick and easy. Here's how it works:

• (1) Layout hole location,draw centerlines so that they extend beyond the hole size to bepunched.
• (2) Drill proper sizepilot hole in the center.
• (3) Put drive screwthrough die and pilot hole.
• (4) Thread on punchuntil both die and punch are ight against metal.
• (5) Line up centerlines of the hole with marks on outside of the die.
• (6) Turn drive screwwith open end or box wrench (clockwise) until hole is punched.
• (7) Remove punch fromdrive screw and the metal halves will fall out.
• NOTE: You canuse the Hydraulic Ram Kit (P/N:7646) with the round hole punchesinstead of turning the drive screw with a wrench.