1/4 NPT x 3/8 HOSE/90 DEGREE AA1K1-4-61/4 NPT x 3/8 HOSE/90 DEGREETempest fittings are FAA-PMA approved and are specially designed to reduce pressure drop and improve pneumatic system performance. The fittings are manufactured of light weight, thin wall steel tubing. Smooth tube bends permits an even flow of air through the fitting with minimal restriction. Tempest fittings are unlike the standard AN/MS fittings that have sharp internal corners, which restricts air flow in the system.Product CodesMfr Part No:AA1K1-4-6ECCN:9A994PMA:PQ1206CESCHEDULE B CODE:8803300010..

100 PSI Hand Air Pump with Gauge ROB 164G. Aircraft instrument or gauge. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ROB 164G against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

2.80/2.50 X 4 4-PLY SPECIALTY TIRES PNEUMATIC TAILWHEEL TIRE AD1A2..

3M ELITE PNEUMATIC ORBITAL SANDER - 3 INCH 051125-87092..

85 Deg Mini Pneumatic Main Gear ROB 551RS. Landing gear or drive-gear component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number ROB 551RS against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ADVANCED AIRCRAFT SYSTEMS 007038603X. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 007038603X against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

AIR DATA TEST SET/RVSM/4 CHANNEL ADTS554F-E0-SCAS-SRADTS554F Air Data Test Set | 4-ChannelThe ADTS554F Air Data Test Set is a portable four-channel flightline pitot static tester. It provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing for any aircraft requiring angle of attack two off static-controlled channels, in addition to a pitot test channel. The ADTS554F can also be used as a standard two-channel, three-channel, or 2 independent two-channel flightline air data test set. Included is the ADTS Touch, a removable, robust wireless hand terminal that communicates to the test set via secure Bluetooth® wireless technology. This technology and the innovative design of the ADTS Touch remove the need to run cables or hoses into the cockpit.Test Set Includes:ADTS554F pitot static testerADTS Touch hand terminalAC power lead: 1.8 m (6 ft) length approximatelyADTS Touch remote connecting cable: 1X 5m (16ft)and 1X 18m (59 ft) length approximatelyADTS Touch battery packADTS Touch AC power supply unitPack of Ps and Pt color labelsMulti-language installation manualAccessories  bagOperator manual (installed in ADTS Touch)Calibration certificate traceable to international standardsFeatures:ADTS Touch hand terminal with Bluetooth® wireless technology (backup cable supplied)Swipe–action touch screen user interface with the color graphics and menuUses standard icons and layouts for routine testingCan be used as two- or three-channel air data test setMultiple languagesHigh flow proportional pressure control technologyLow airspeed optionTERPS high accuracy pressure sensors insideAccuracy suitable for RVSM validation15-month accuracy for low cost of ownershipOptional 18-month accuracy for increased savings on the cost of ownershipEngine Pressure Ratio optionStores customized aircraft test sequencesLarge capacity pressure/ vacuum pumpRetrospectively upgradable to four channelsAccessories bagDruck ADTS global service supportProduct CodesMfr Part No:ADTS554F-E0-SCAS-SRECCN:EAR99SCHEDULE B CODE:9031.80.8000 Hazmat charges may applyWeight: 54 lb Dimensions: 20.7 x 16.7 x 11.8 in. (base unit dimensions) Display: 7” WVGA (800X480) TFT, LED backlit display Power: Auto-selection between: 100/120/230 Vac, 50/60 Hz, power - 250 VA 115 Vac, 400 Hz, power - 250 VA Pneumatic connections: AN6 for Ps1 and Ps2 AN4 for Pt1 and Pt2 Temperature: 0°C to 50°C (32°F to 122°F)..

Air-Line Restrictors, for 1/16 inch Airlines, 4 pack ROB 189..

AIRESEARCH PNEUMATIC REL. (P/N: 107312). FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 107312 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

Airframe Structures Aviation Maintenance Technician Book ASA AMT-STRUC..

Airframe Systems Aviation Maintenance Technician Book ASA AMT-SYS..

ALTIMETER PNEUMATIC CDP (P/N: 23932-981). Pitot-static instrument (altimeter). Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 23932-981 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

AMPHENOL DIE SET/For use with Amphenol Crimp Tool 227-944 and Pneumatic Crimp Tool 227-60...

ATS PNEUMATIC inchC inch SQUEEZER KIT ATSC-ATS-114CK..

ATS PNEUMATIC ALLIGATOR SQUEEZE KIT ATSC-ATS-114AK..

Aviation Maintenance Technician Handbook: Airframe Volume 2 ASA 8083-31V2..

BULKHEAD UNION/BRASS/ Tube to Tube, 1/4 inch tube outside diameter. 282P04Poly-Type Bulkhead Union | Fits 1/4in TubingPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing. This poly-flo bulkhead union (Alternate Part# 282P04) fits tubing with a 1/4 inch O.D.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:282P04ECCN:EAR99SCHEDULE B CODE:7419.91.0050Tube Size: 1/4 in (282P04) Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves; Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..

BULKHEAD UNION/NYLON/ Tube to Tube, 3/8 inch tube outside diameter. 282P06Poly-Type Bulkhead Union | Fits 3/8in TubingPoly-Type Flareless tube fittings have reduced a installation time when compared to regular compression or flare fittings -- just push in the tubing and tighten the nut. No wrenches, flaring tools, benders, or other tools needed for installations. Poly-Type fittings that are assembled finger tight on Poly-Type or PVC Tubing and will hold the tubing's burst pressure. To prevent twisting and weakening of the tubing during installation, the nut revolves around the sleeve as it is being tightened, which prevents torque from being transmitted to the tubing, to provide an excellent seal and ensure reliability. Poly-Type fittings can also be used with plastic or soft metal tubing for pneumatic instrumentation circuits and applications with other gases and liquids. Acetyl copolymer sleeves, PVC, or EVA tubing can also be used with Poly-Type fittings, while the universal brass sleeve and nut assemblies are for use with lmpolene, nylon, and soft metal tubing. The half-knurl/half-hex brass nut design provides the versatility, with the plastic sleeve, to quickly and easily finger tighten onto Poly-Type tubing, and the hex portion permits tightening with a wrench -- just one turn passed finger tight. It is recommended to tighten with a wrench for applications where brass sleeves are used and where service conditions require full pressure and capability of the tubing. This poly-flo bulkhead union (Alternate Part# 282P06) fits tubing with a 3/8 inch O.D.Reduces installation timeNo tool required for installationExcellent holding power without twisting the tubingUniversal fit for Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubingProduct CodesMfr Part No:282P06SCHEDULE B CODE:7419.91.0050Tube Size: 3/8 in (282P06) Materials: Brass bodies and nuts; Acetal copolymer (Celcon®) or brass sleeves; Polyethylene, Polypropylene, Nylon, Polyvinyl Chloride, Polyallomer Compatible Tubing: Poly-Type, PVC or EVA tubing, as well as lmpolene and Nylon tubing and soft metal tubing..

DANIELS POSITIONER/For use with Leach International 22 gauge and 24 gauge contacts. 51245Positioner Adapter | K Series, K1245Positioners allow for the crimping of specific sized contacts when installed on a crimping tool. The data plate on each positioner designates which contacts the positioner accommodates, the wire size, and selector position.Contacts serviced:Leach International05 2850005 91200PAN6566-22Wire gauge:22, 24Compatible tools:AFM8 Hand Crimp Tool FrameWA22 Pneumatic Crimp Tool FrameAFME8B Battery Crimp Tool FrameProduct CodesMfr Part No:51245ECCN:EAR99SCHEDULE B CODE:8203.20.6060..

DIE ASSEMBLY/8 gauge, for use with WA23 pneumatic crimp tool WA23-140DAWA23-140DA Pneumatic Crimp Die Assembly | 8 Gauge, M22520/23The WA23-140DA indenter die assembly is used with the WA23 pneumatic crimp tool. The die assembly inserts to the tool body over the locator, the alignment hole matches with the alignment pin for proper installation. Version WA23-140DA is 8 AWG.For use with WA23 pneumatic crimp toolAlignment hole for alignment with tool bodyProduct CodesMfr Part No:WA23-140DASCHEDULE B CODE:8203.20.6060Gauge: 8 AWG Locator: WA23-256L  Contacts: AMP-TYCO # UN-INSUL LUG 33463..