#4 ROCKER COVER ASSY. AF0555233-1. Engine valve-train rocker assembly. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AF0555233-1 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

03D23350 LYCOMING COVER FUEL PUMP 03D23350. Engine accessory pump (oil, fuel, vacuum, hydraulic). Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 03D23350 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

06B21644 LYCOMING GASKET - OIL FILTER BASE COVER 06B21644..

06B26811-Y LYCOMING GASKET - ROCKER BOX COVER - SILICONE 06B26811..

06B26813-Y LYCOMING GASKET - ROCKER BOX COVER - SILICONE 06B26813..

08C21936 LYCOMING PLATE - INJECTOR COVER 08C21936. Fuel injection component. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 08C21936 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

1 inch Square White & Black UltraCote Covering, 78 inch Roll HAN U930..

1 inch Square White & Red UltraCote Covering, 78 inch Roll HAN U932..

1/2 inch Square Yellow & Black UltraCote Covering, 78 inch Roll HAN U936..

1/2 OVAL BRAID/TINNED COPPER 2146-SILVER pack of 100Oval Braid | 1/2 in, Tinned CopperAlpha Wire braid is an exceptional, low resistance option to create a point-to-point ground strap. In retrofit applications, braid is an ideal way to install additional shielding to cable.Version (Alternate Part# 2146 SV005) is 1/2 inch tinned copper oval braid.1/2 inchRound Construction per QQ-B575BShield Coverage 95% MinimumTinned CopperUsed in Aspen EFD1000 installProduct CodesMfr Part No:2146-SILVERASTM:ASTM-B-33ECCN:EAR99SCHEDULE B CODE:8544.00.0000..

1/4 OVAL BRAID/TINNED COPPER 2142-SILVER pack of 100Oval Braid | 1/4 in, Tinned CopperAlpha Wire braid is an exceptional, low resistance option to create a point-to-point ground strap. In retrofit applications, braid is an ideal way to install additional shielding to cable.Version (Alternate Part# 2142 SV005) is 1/4 inch tinned copper oval braid.1/4 inchRound Construction per QQ-B575BShield Coverage 95% MinimumTinned CopperUsed in Aspen EFD1000 installProduct CodesMfr Part No:2142-SILVERASTM:ASTM-B-33ECCN:EAR99SCHEDULE B CODE:8544.00.0000..

1/5 Scale Fiberglass Floats HAN 6030. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number HAN 6030 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

10 AMP DIGITAL LOW RESISTANCE OHMMETER DLRo10HDDLRO10HD 10 Amp Digital Low Resistance OhmmeterThe DLRO10HD digital low resistance ohmmeter is designed for measure low resistant values in applications ranging from railways and aircraft. This ohmmeter features an internal rechargeable battery to allow operation in a laboratory, workshop,  or in the field. It can also operation from a mains power supply, even if the battery has run out.Rugged case well suited to transportation with shoulder strap and lead set pouch„Removable lid facilitates easy test lead connection„Operational ingress protection is IP 54 (battery power only) ensuring protection from the elements„7 Ah lead acid battery provides extended operation and can be charged whilst operating from mains power„Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous and inductive modes„Large, clear LCD display with backlight and contrast adjustment„Auto power off function conserves batteryProduct CodesMfr Part No:DLRo10HDWeight: 6.7 kg Case Dimensions: 315 x 285 x 181 mm Display: Main display 5 digit plus 2x5 digit secondary display Temperature: -10°C to 50°C, operational -25°C to 60°C, storage Battery Type: 6V, 7Ah sealed lead acid Voltage Input Range: 100V – 240V, 50/60Hz, 90VA Charge Time: 8 hours Backlight: LED backlight Auto Power Off: 300 seconds Mode Selection: Left rotary switch Range Switch: Right rotary switch IP Rating: IP65 with lid closed IP54 during battery operation Safety: IEC61010-1, CAT 300V when used with terminal cover EMC: IEC61326-1..

100' LENGTH OF M27500-20TE2T14. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-20TE2T14M27500-20TE2T14 Extruded ETFE Tefzel Wire | 20 AWG, 2 ConductorSAE AS22759 wire is a fluoropolymer–insulated, single-conductor wire offering excellent performance for a variety of military aerospace and commercial applications. It has high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles as well as areas requiring overload stability, low smoke emission and fire resistance, such as aircraft cabins.M27500-20TE2T14 meets SAE AS22759/16 specifications and is designed for aerospace applications for commercial and military aircraft. It has a stranded tin-plated, copper conductor, Extruded ETFE dielectric, a rating of 600 volts and 150°C. This M27500-20TE2T14 extruded ETFE tefzel wire (Alternate Part# 20TE2T14) has two, tin-plated 20 AWG conductors with extruded ETFE insolation, a 150°C rating. Colored white.600 volt rating150°C temperature ratingExcellent thermal stabilityHigh reliabilityHigh break strength and flex lifeHigh abrasion resistanceProduct CodesMfr Part No:M27500-20TE2T14MIL SPEC:M27500-20TE2T14ECCN:EAR99MIL SPEC:M27500-20TE2T14SCHEDULE B CODE:8544110050AWG Size: 20 Conductor Stranding: 19/32 Number of Strands: 19 Strand Size: 32 Numbers of Conductors: 2 Outside Diameter: 0.0600 in, nominal Conductor Material: Tin-plated copper Insulation Material: Extruded Ethylene Tetrafluoroethylene (ETFE) Shield: Overall braid shield Shield Material: Tinned copper braid Shield coverage: 85% Jacket Material: Extruded Ethylene Tetrafluoroethylene (ETFE) Jacket Color: White Weight Approx: 19 lb/MFT Operating Temperature: 150°C, maximum Voltage: 600 volts NEMA Type: WC 27500 Mil-Spec: M27500/16..

100' LENGTH OF M27500-20TG2T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-20TG2T14M27500-20TG2T14 Extruded ETFE Tefzelâ„¢ Wire | 20 AWG, 2-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-20TG2T14 Tefzelâ„¢ wire (Alternate Part# 20TG2T14) meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 2-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-20TG2T14MIL SPEC:M27500-20TG2T14ECCN:EAR99MIL SPEC:M27500-20TG2T14SCHEDULE B CODE:8544110050SAE AS22759/18 SPECIFICATIONS: Gauge: 20 AWG Number of Strands: 19 Strand Size: 32 Outside Diameter (Insulation): 0.049 - 0.053 in Conductor Diameter: 0.038 in Weight: 4.60 LB/MFT Impedance (@ 20°C): 9.8 Ω/MFT, maximum Number of Conductors: 2, (20TG2T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG1T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG1T14M27500-22TG1T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 1-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG1T14 Tefzelâ„¢ wire (Alternate Part# 22TG1T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 1-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG1T14MIL SPEC:M27500-22TG1T14ECCN:EAR99MIL SPEC:M27500-22TG1T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 1, (22TG1T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG3T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG3T14M27500-22TG3T14 Extruded ETFE Tefzel Wire | 22 AWG, 3-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.This M27500-22TG2T14 Tefzelâ„¢ wire (Alternate Part# 22TG3T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 3-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG3T14MIL SPEC:M27500-22TG3T14ECCN:EAR99MIL SPEC:M27500-22TG3T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 3, (22TG3T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14) – Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14) : Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

100' LENGTH OF M27500-22TG4T14 WHITE TEFZEL SHIELDED. NOTE: Not on a spool, hand coiled in a sealed plastic bag. M27500-22TG4T14M27500-22TG4T14 Extruded ETFE Tefzelâ„¢ Wire | 22 AWG, 4-ConductorSAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment. M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.M27500-22TG4T14 Tefzelâ„¢ wire (Alternate Part# 22TG4T14) meets SAE AS22759/18 specifications and is a 22 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.Stranded, tin-plated, copper conductorExtruded Ethylene tetrafluoroethylene (ETFE) insulationTin-plated, copper-braided shield with 85% coverageThin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket150°C maximum temperature600 volt ratingProduct CodesMfr Part No:M27500-22TG4T14MIL SPEC:M27500-22TG4T14ECCN:EAR99MIL SPEC:M27500-22TG4T14SCHEDULE B CODE:8544110030SAE AS22759/18 SPECIFICATIONS: Gauge: 22 AWG Number of Strands: 19 Strand Size: 34 Outside Diameter (Insulation): 0.041 – 0.045 in Outside Diameter of Shield: 0.086 in, nominal Conductor Diameter: 0.030 in Weight: 3.04 LB/MFT Impedance (@ 20°C): 16.2 Ω/MFT, maximum Number of Conductors: 4, (22TG4T14) Mil-Spec: M27500 NEMA Type: WC 27500 Conductor Material: tin-plated copper Insulation Material: extruded ethylene tetrafluoroethylene (ETFE) Shield Material: tinned copper braid Shield Coverage: 85% Jacket Material: extruded ethylene tetrafluoroethylene (ETFE) Temperature: 150°C, maximum Voltage Rating: 600 V SAE Specification: SAE-AS 22759/18 M27500 SPECIFICATIONS: Temperature Rating: Up to 200°C (392°F) depending on the type of construction Insulator: (RC-06): Polytetrafluoroethylene (PTFE) (RC-09): Extruded PTFE (TE-14, TG-14): Extruded Ethylene Tetrafluroethylene (ETFE) Conductor: (RC-06, RC-09): Stranded Silver Coated Copper (TE-14, TG-14): Stranded Tin Copper Jacket:  (RC-06): PTFE Tape (RC-09): Extruded FEP (RC-09) (TE-14, TG-14): Extruded ETFE Other Designations: NEMA WC 27500, SAE AS22759..

1060 MICRO CASE/Clear case with black liner, Includes: Rubber Liner, Stainless Steel Hardware and Carabiner, Interior Dimensions: 8.25 x 4.25 x 2.25, Exterior Dimensions: 9 3/8 x 5 9/16 x 2 5/8, water resistant, crushproof, and dust proof 1060-025-1001060 Micro Case | Clear Case with Black Black LinerThe 1060 Micro Case is designed to protect cell phones, iPods, cameras, and other small items and electronics. These cases are manufactured with durable polycarbonate resin with a water-resistant rubber liner and a shock-absorbing insert liner.This 1060 Micro case (Alternate Part# 1060025100) is a clear case with black liner.Interior: 8.3 x 4.3 x 2.3 inchWatertight, crushproof, and dust-proofRubber liner for extra protection doubles as o-ring sealEasy open latchCarabinerAutomatic Pressure Equalization Valve - balances interior pressure, keeps water outStainless steel hardwareAvailable in clear with color liner or solid*Case is able to be submerged under 1 meter of water for up to 30 minutes in accordance with IP67 testing parametersProduct CodesMfr Part No:1060-025-100SCHEDULE B CODE:0000.00.0000Weight: 1.03 lb (0.5 kg), with foam 1.00 lb (0.5 kg), no foam Dimensions: Internal: 8.25 x 4.25 x 2.25 in (21 x 10.8 x 5.7 cm) Exterior: 9.38 x 5.56 x 2.63 in (25.1 x 14.2 x 6.7 cm) Lid Depth: 0.69 in (1.8 cm) Bottom Depth: 1.44 in (3.7 cm) Total Depth: 2.13 in (5.4 cm) Internal Volume: 0.05 ft³ (0.001 m³) Buoyancy: 2.49 lb (1.1 kg) Body Material: Polycarbonate Latch Material: Xylex O-ring Material: Thermoplastic Rubber Foam Material: TL-426 4 lb Esther Temperature Range: -10°F to 199°F (-23°C to 93°C)..

1060 MICRO CASE/Clear case with blue liner, Includes: Rubber Liner, Stainless Steel Hardware and Carabiner, Interior Dimensions: 8.25 x 4.25 x 2.25, Exterior Dimensions: 9 3/8 x 5 9/16 x 2 5/8, Water Resistant, Crushproof, and Dust Proof 1060-026-1001060 Micro Case | Clear Case, Blue LinerThe 1060 Micro Case is designed to protect cell phones, iPods, cameras, and other small items and electronics. These cases are manufactured with durable polycarbonate resin with a water-resistant rubber liner and a shock-absorbing insert liner.Water resistant, crushproof, and dust proofEasy open latchRubber liner for extra protection doubles as o-ring sealAutomatic Pressure Equalization Valve - balances interior pressure, keeps water outStainless steel hardwareCarabinerLifetime Guarantee of ExcellenceAvailable in clear with color liner or solidProduct CodesMfr Part No:1060-026-100ECCN:EAR99SCHEDULE B CODE:3923.10.0000Weight: 1.03 lb (0.5 kg), with foam 1.00 lb (0.5 kg), no foam Dimensions: Internal: 8.25 x 4.25 x 2.25 in (21 x 10.8 x 5.7 cm) Exterior: 9.38 x 5.56 x 2.63 in (25.1 x 14.2 x 6.7 cm) Lid Depth: 0.69 in (1.8 cm) Bottom Depth: 1.44 in (3.7 cm) Total Depth: 2.13 in (5.4 cm) Internal Volume: 0.05 ft³ (0.001 m³) Buoyancy: 2.49 lb (1.1 kg) Body Material: Polycarbonate Latch Material: Xylex O-ring Material: Thermoplastic Rubber Foam Material: TL-426 4 lb Esther Temperature Range: -10°F to 199°F (-23°C to 93°C)..