Out of Stock - On Backorder
AMPLIFIED ANTENNA SPLITTER/With SMA connector ALDCBS1X8-SMA
AMPLIFIED ANTENNA SPLITTER/With SMA connector ALDCBS1X8-SMAAmplified GPS Antenna Splitter | 8 outputs, 1 input, SMA connect
The ALDCBS1X8 GPS amplified splitter has one input and eight outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J8) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.
This ALDCBS1X8 GPS amplified splitter (Alternate Part# ALDCBS1X8S) includes one input and eight outputs each with SMA connectors.
- Excellent gain flatness for all GNSS frequencies
- Provides a typical amplifier gain of 14 dB
- Extremely flat group delay with a variation less than 1 ns
- Phase matched outputs (less than 1.0)
- Prevents antenna alarm faults from connected devices with 200 DC blocked outputs
Product Codes | |
|---|---|
| Mfr Part No: | ALDCBS1X8-SMA |
Weight: 10 oz (286 g)Dimensions: 1.3 x 5.25 x 2.5 in, not including connectorsOperating Temperature: -40°C to 75°CFinish Housing and Base Plate: electroless nickel plated MIL-C-26074C class 1, 0.0001 to 0.0003 maxFinish Lid: anodize, TYPE II, class 2, black, per MIL-A-8625Frequency Range: 1.1 to 1.7 GHzImpedance: 50ΩGain: 13 t0 15 dB, 14 dB typicalInput SWR: 2.0:1Output SWR: 1.5:1Noise Figure: 3.8 dB typical, 4.3 maximumGain Flatness: 0.5 dB typical, 1.5 dB maximumAmplitude Balance: 0.5 dBPhase Balance: 1.0°Isolation: 15 to 25 dB, 20 dB typicalGroup Delay Flatness: 1 nsPi dB: -18 dBCurrent Draw: 15 mA
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: ALDCBS1X8-SMA
$0.00
