Out of Stock - On Backorder
AMPLIFIED GPS SPLITTER/With SMA connector ALDCBS1X4-SMA
AMPLIFIED GPS SPLITTER/With SMA connector ALDCBS1X4-SMAAmplified GPS Antenna Splitter | 4 outputs, 1 input, SMA connectors
The ALDCBS1X4 GPS amplified splitter has one input and four outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L-band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna. This allows the GPS receiver to power both the antenna and the splitters internal amplifier. Each RF output (J2-J4) are DC blocked and incorporates a 200 resistor to simulate the antenna current draw preventing false antenna alarm faults.
This ALDCBS1X4 GPS amplified splitter (Alternate Part# ALDCBS1X4S) includes one input and four outputs each with SMA connectors.
- Excellent gain flatness for all GNSS frequencies
- Provides a typical amplifier gain of 18 dB
- Extremely flat group delay with a variation less than 1 ns
- Phase matched outputs (less than 1.0)
- Prevents antenna alarm faults from connected devices with 200 DC blocked output
Product Codes | |
|---|---|
| Mfr Part No: | ALDCBS1X4-SMA |
Weight: 12 oz (345 g)Dimensions: 1.3 x 3.25 x 2.5 in, not including connectorsOperating Temperature: -40°C to 75°CFinish Housing and Base Plate: electroless nickel plated MIL-C-26074C class 1, 0.0001 to 0.0003 maxFinish Lid: anodize, TYPE II, class 2, black, per MIL-A-8625Frequency Range: 1.1 to 1.7 GHzImpedance: 50ΩGain: 17 to 20 dB, 18.5 dB typicalInput SWR: 2.0:1Output SWR: 1.8:1Noise Figure: 4.2 dB typical, 4.5 maximumGain Flatness: 0.5 dB typical, 1.5 dB maximumAmplitude Balance: 0.5 dBPhase Balance: 1.0°Isolation: 15 dBGroup Delay Flatness: 1 nsPi dB: -14 dBCurrent Draw: 15 mA
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: ALDCBS1X4-SMA
$0.00
