Out of Stock - On Backorder
AMPLIFIED SPLITTER/4 OUTPUTS/TNC/5.0/MC. NALDCBS1X4-T/5/MC
AMPLIFIED SPLITTER/4 OUTPUTS/TNC/5.0/MC. NALDCBS1X4-T/5/MCNetworked Amplified GPS Splitter | 1 input, 4 output, TNC Connectors
This amplified network loaded DC blocked GPS splitter features one input and four output for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other ports J2—J4 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.
This amplified GPS splitter (Alternate Part# NALDCBS1X4) features one input and four outputs, TNC-type female connectors, 5-volt output voltage, and 9V — 32V source voltage from a MIL-DTL-5051 10SL connector.
- Excellent amplitude balance: <1 dB variation between ports
- Flat group delay: <1 ns between L1 & L2
- High output gain: 18.5 dB across operating frequencies
- Wide accepted frequency range: covers entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
- Matched phase balance: < 4° variation between ports
Product Codes | |
|---|---|
| Mfr Part No: | NALDCBS1X4-T/5/MC |
| ECCN: | 7B994 |
| SCHEDULE B CODE: | 8526.91.0070 |
Weight: 11.7 oz (332 g) max.Dimensions: 1.3 x 3.25 x 2.5 (does not include connectors)Operating Temperature: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩCurrent Draw: 17 mAInput P1dB: -24 dBmReq. DC Input V.: 3.3 VDC  — 15 VDCGain: 17 dB — 20 dB (18.5 dB, typical)Input SWR: 2.0:1Output SWR: 2.0:1Noise Figure: L1: 2.5 dB, typical (2.75 dB, max.) L2: 5.5 dB, typical (6.0 dB, max.)Gain Flatness: 0.5 dB, typical (1.0 dB, max.)Amplitude Balance: 0.5 dB, typical (1.0 dB, max.)Phase Balance: 4.0° max.Isolation: L1: 24 dB L2: 22 dBGroup Delay Flatness: 0.25 ns, typical (1.0 ns)Source Voltage Option: 9 VDC — 32 VDC (custom supplied DC) MIL-DTL-5051 10SL connector with mateOutput Voltage Option: 5V @ 130 mAConnector Option: TNC type
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: NALDCBS1X4-T/5/MC
$659.99
