ANTENNA SPLITTER/2 outputs, T/5/MC NLDCBS1X2-T/5/MC
ANTENNA SPLITTER/2 outputs, T/5/MC NLDCBS1X2-T/5/MCNetworked GPS Antenna Splitter | 2 outputs, 1 input, TNC connector
The NLDCBS1X2 passive, networked GPS splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire GPS L-band (GNSS) frequencies with excellent gain flatness. In the standard configuration without external power, RF output (J1) passes DC from the connected GPS receiver, through the splitter and onto the antenna, while the other RF output (J2) remains DC blocked. When optional external power is applied, the DC output voltage on all RF outputs become user selectable. The DC blocked outputs incorporate a 200 resistor to simulate antenna current draw and prevent false antenna fault detections.
This passive, networked GPS splitter (Alternate Part# NLDCBS1X2) includes one input and two outputs, each with TNC connectors. This GPS splitter operates on 9 - 32 VDC military DC connector and provides DC output of 5 volts.
- Excellent gain flatness for all GNSS frequencies
- Extremely flat group delay with a variation less than 1 ns
- Low insertion loss
- Passes entire L-band (GNSS) frequencies
- Phase matched outputs (less than 1.0)
- Prevents antenna alarm faults from connected devices with 200 DC blocked outputs
Product Codes | |
|---|---|
| Mfr Part No: | NLDCBS1X2-T/5/MC |
Weight: 11.8 oz (340 g)Dimensions: 1.3 x 3.25 x 2.5 in (including base plate)Operating Temperature: -40°C to 75°CFinish Housing and Base Plate: Electroless Nickel Plated MIL-C-26074C Class 1, .0001-.0003 MaxFinish Lid: Anodize, Type II, Class 2, Black, per MIL-A-8625Frequency Range: 1.1 - 1.7 GHzImpedance: 50ΩInput SWR: 2.0:1Output SWR: 1.5:1Insertion Loss: —7.5 to -9.5 dB, -8.5 dB typicalGain Flatness: 1.0 dBAmplitude Balance: 1.0 dBPhase Balance: 1°Isolation: Adjacent ports: 15 dB Opposite ports: 22 dBGroup Delay Flatness: 1 ns
- Stock: Warehouse
- Manufacturer Part #: NLDCBS1X2-T/5/MC
$388.00
