Out of Stock - On Backorder
RACK MOUNT AMPLIFIED SPLITTER/2 Input, 32 Output, Networking, Hi-Isolation, TNC Connector, 5V output, MC (Military DC) Connector NHIDRMALDCBS2X32-T/5/MC
RACK MOUNT AMPLIFIED SPLITTER/2 Input, 32 Output, Networking, Hi-Isolation, TNC Connector, 5V output, MC (Military DC) Connector NHIDRMALDCBS2X32-T/5/MCDual Antenna Rack Mount Amplified GPS Splitter | 2 Input, 32 Output
The dual antenna rack mount amplified GPS splitter receives two antenna inputs and splits GPS into 32 isolated outputs with only -2 dB maximum signal loss. This GPS slitter covers the entire L1 & L2 bands with excellent gain flatness. Normally, this splitter is powered by a transformer that supplies power to the splitter's amplifier and root antenna. The outputs are blocked with a 200Ω resistor to simulate antenna current draw. This two-input and 32-output is suited to aid in timing and testing applications where the GPS carrier signal is required by up to 32 GPS devices simultaneously.
- Two antenna input allows for dual antenna
- Less than 1ns flat group delay
- High isolation between adjacent ports (>35 dB)
- Phase matched outputs (phase J1 – J2 < 1.0°)
Product Codes | |
|---|---|
| Mfr Part No: | NHIDRMALDCBS2X32-T/5/MC |
Weight: 16 lbDimensions: 5.4 x 18 x 17 inOperating Range: -40°C to 75°CFrequency Range: 1.1GHz — 1.7 GHz (Ant – any output, unused outputs - 50Ω)In/Out Impedance: 50Ω (Ant, J1, J2, J3, J4, J5, J6, J7, J8)Gain: 13dB – 15dB (14dB typical)Gain-High Isolation: -2.0dB — 2.0 dB (Ant – any output, unused outputs - 50Ω)Input SWR: 2.0:1, max. (all ports @ 50Ω)Output SWR: 1.3:1 max. (all ports @ 50Ω)Noise Figure: 3.8dB typical (4.3dB max.)Gain Flatness: 0.5 dB typical (1 dB max.)Amplitude Balance: 0.5 dB max. (| J1 – J2 | ; Ant – any output, unused outputs - 50Ω)Phase Balance: 1.0dB max. (Phase (J1 – J2) ; Ant – any output, unused outputs - 50Ω)Isolation: 35dB min.Group Delay Flatness: 1 ns (Td,max - Td,min : Ant – J1, J2 - 50Ω ; Ant – J2, J1 - 50Ω)Current: 15 mA (amplifier current draw @ 50Ω)Source Voltage Option: 9 VDC — 32 VDC military connector (customer supplied)Output Voltage Option: 5 VDC @ 110 mAOutput Port Isolation: 35 dB, min. (high isolation)Pass/Block DC Option: DC blocked (Jx (x=1...32) is DC blocked, Pass DC to ANT.)RF Connector Option: TNC connector
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: NHIDRMALDCBS2X32-T/5/MC
$5,999.99
