ARTEX WIRE WHIP ANTENNA 110-324 110-324. Aircraft electrical wire or cable. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number 110-324 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

ASTRO+/dual band ADS-B Receiver includes 1 RS232 Serial Port, SD card recorder, Pressure Altitude, External ADSB antenna( GPS is internal) 0108-01-01..

AUTOMATIC ANTENNA TUNER AH4 12AUTOMATIC ANTENNA TUNERTune-up from HF through 50 MHz band. Covers all amateur bands from 3.5 MHz through 50 MHz with a 7m (23ft) or longer wire antenna or the AH-2B antenna. Small size for easy installation in mobile our ground installations. Weather-resistant housing allows use in all conditions.The AH-4 is designed for use with Icom HF transceivers.Automatically performs tuning operations for mode, power settings, etc.Average tune-up time is less than 2.5 seconds.Up to 45 memory channels store minimum SWR settings to provide quick re-tuningEmits only 300mW of RF output while tuning.Product CodesMfr Part No:AH4 12ECCN:5A991SCHEDULE B CODE:8525.20.3030..

AVIATION MOBILE ANTENNA/30 inch length, Frequency 118-136 MHZ. Includes: 12 feet of RG-58/U coax cable with PL-259 connector, magnetic base for vehicle mount. For use with IC-A120. K220AK220A Com Whip Antenna | Magnetic Mount, 118-136 MHzThe K220A communications whip antenna is a 30-inch VHF antenna with included magnetic base mount.Works inconjunction with Icom IC-A110 and IC-A210 radiosProduct CodesMfr Part No:K220AECCN:5A991SCHEDULE B CODE:8526.10.6000Length: 30 in Antenna type: VHF, whip Mounting: magnetic base Cable length: 17 in Frequency: 118 MHz – 136 MHz..

AVIATION MOBILE ANTENNA/WHIP, 30 inch length, frequency 118-136 MHZ, includes 17 feet of RG-58/U coax cable, no connector, permanent mount base for vehicle. Requires 3/4 inch hole to mount. For use with Icom IC-A120. K220CK220C Communication Antenna | 30 inch Whip & 17 inch CableThe K220C is a roof mount antenna to accompany the ICOM A-110-05 vehicle mount transceiver. This communications antenna (Alternate Part# K220C): Includes a 300-inch whip antenna and a 17-inch cableProduct CodesMfr Part No:K220CECCN:5A991SCHEDULE B CODE:8526.10.6000..

AVMAP EKPV EFIS PLUS EMS KIT FOR ROTAX P1MK3705AM. FAA-approved aircraft parts kit. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number P1MK3705AM against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

AVMAP EKPV FREE WIRE CABLE CBY1MG0500. Aircraft electrical wire or cable. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number CBY1MG0500 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

AVMAP EXTERNAL GPS ANTENNA FOR ULTRA EFIS UX0GRM00AM..

AVMAP ULTRA EFIS PLUS ENGIBOX KIT FOR ROTAX UX0EFSE1AM..

AvMap ULTRA EFIS/Electronic Flight Instrument System(EFIS), Stand-alone unit, 3.5 ultra bright LCD display, solid-state gyros accelerometers, magnetic field sensors, air data sensors and UAV navigation motion processor. Includes GPS antenna receiver and 2 serial connections for sending out NMEA messages. Compatible with RS-232 and NMEA 0183. UX0EFS51AMUltra EFIS | Electronic Flight Instrument SystemThe Ultra EFIS is a complete instrumentation system for primary flight display (PFD) and horizontal situation indicator (HSI) functions. It is a rugged and reliable system designed for fixed panel installation and fits in a standard 3 1/8” diameter hole. This unit combines 9 instruments into 1. Users get an Altimeter, Airspeed Indicator, Artificial Horizon, Directional Gyro / HSI, Side Slip Indicator, Vertical Speed Indicator, Automatic Direction Finder with GPS, G-meter, and Magnetic Compass all in one instrument. The Ultra EFIS contains solid-state gyros, accelerometers, magnetic field sensors, air data sensors and motion processors.Connecting an external GPS receiver to the Ultra, the system provides the pilot with navigation information on the HSI page, providing its position, direction and radials relative to reference navigation points.Software Update 5.22.0R released! For more information, check out the promo video here. Preloaded with Jeppesen navigation POI’sCoverage in Europe-Africa, North America, South America, Asia-AustraliaDisplays altimeter, airspeed, artificial horizon, directional gyro/horizontal situation, side slip, vertical speed informationAutomatic direction finder with GPSG-meterMagnetic compassFits in a standard 3 1/8” diameter holeProduct CodesMfr Part No:UX0EFS51AMWeight: 230g (5.11 oz) Dimensions: 3.74 x 3.74 x 3.07 in. (95 x 95 x 78 mm) Interface: RS-232 serial Operating temperature: -20 °C + 70 °C ( -4 °F + 158 °F) Pitot/static ports: 1/8 in. NPT..

BAE Hawk Red Arrow 80mm EDF PNP with Reflex FMM 099P2X..

BARE UNIT/NO ANT/CABLE/BRACKET 3000-10BModel 3000-10B (AF)(AP) ELT | ELT unit & Battery OnlyThe Model 3000-10 (AF)(AP) ELT has been updated to meet the requirements of RTCA DO-183 for emergency locator transmitters. The Model 3000 ELT is interchangeable with existing units in form, fit and function. The standard whip antenna and coaxial cable, previous supplied with the model 3000, remains interchangeable with the newer 3000-10 & 3000-11 models while other serviceable components may remain in use with the this current model transmitter. The remote switch may use already existing wiring and installation requires minimal panel space. The 3000-10 and 3000-11 transmitters incorporate an alkaline battery pack that is specifically designed to endure extreme short-term, thermal variations which meet the mechanical shock requirements of RTCA DO-183. This Model 3000-10 (Alternate Part# 3000-10B) includes the ELT unit and battery only.Interchangeable with existing units in form, fit and functionRemote panel control switch includes a visual activation monitorStandard whip antenna and coaxial cable is interchangeable with newer modelsRemote switch may use already existing wiring and installation requires minimal panel spaceEmergency voice transmission is provided on the 3000-10 transmitter if desiredProduct CodesMfr Part No:3000-10BECCN:7A994SCHEDULE B CODE:8526106000TSO:C91AWeight: 1.9 lb (0.86 kg) with battery, antenna, and mounting bracket Dimensions: 7-5/8 x 3-/12 x 2-3/4 in (19.4 x 9 x 7 cm) Frequency: 121.493925 MHz – 121.506075 MHz..

BASE STATION ANTENNA SYSTEM/For use with all aviation base station radios. Includes: 50ft of RG-213 with PL-259 connector on both ends, Base station antenna kit collar, Set screws, Ground radials, Bulkhead adapter, Lock washer, Hex Nut, Base station antenna bracket, Mounting clamps and Phasing coil. B ANT A20 0Base Station Antenna SystemThe B-ANT antenna system works with aviation base station radios with a frequency range of 118.8 MHz to 126.8 MHz. This antenna system (Alternate Part# B-ANT) includes a 50-foot RG-213 cable with PL-259 connectors at each end, base station antenna kit collar, set screws, ground radials, bulkhead adapter, lock washer and hex nut, base station bracket, mounting clamps and phasing coil.Product CodesMfr Part No:B ANT A20 0ECCN:5A991SCHEDULE B CODE:8529.10.6000..

BEACON TESTER/Compact, with integrated receiver High Stability, Android operating system, IP68 rated, waterproof, received Cospas-Sarsat frequency channels and ELT protocols, measures RF parameters and modulation details on 406, 121.5 and 243 MHz, internal antenna receives 406 burst, receives full RF power- no attenuator required, user-defined cable loss factor, creates PDF test report, interface to PC via direct connection, BT200-2100BBT200 Handheld Beacon Tester | High Stability & ELT Version The BT200 beacon tester follows in the footsteps of the popular BT100. The BT200 is more accurate, inherently rugged, and intuitive to use. Packaged in a handheld design, the BT200 beacon tester performs code verification, annual certifications, inspections, troubleshooting, and tests all Cospas-Sarsat 406 ELTs and older C91a ELTs without requiring expensive equipment.Includes: BT200 rugged handheld deviceRF input cableUSB interface cableOTG/USB cableAC adapterScreen cleaning clothHard caseOperator's manual and calibration certificateFeatures: Compact and rugged with an integrated receiverAndroid operating systemWaterproof and rugged construction with an IP68 ratingReceives all Cospas-Sarsat frequency channels and ELT protocolsMeasures RF parameters along with modulation details on 406, 121.5 and 243 MHzPowerful 406 MHz graphic measurements for power, phase modulation and in-band spectrumInternal antenna receives 406 MHz burst up to 10 meters away or directly connect the beacon to tester at 50Receives full RF power with no attenuator requiredAdd text, audio, photos or videos to each measurementUser-defined cable loss factorEasy to use file systemCreate PDF Test ReportInterfaces easily to a PC through a direct connection, wifi, or USB driveIncludes a Certificate of Calibration with detailed calibration data, free software, and firmware updates (available online)Cospas-Sarsat Second Generation Beacon (SGB) readyProduct CodesMfr Part No:BT200-2100BECCN:7B994SCHEDULE B CODE:8471.30.0100Weight: 0.49 lb Dimensions: 2.76 x 2 x 5.31 in. RF range: 406 MHz, 121.5 MHz, 243 MHz VSWR: 1.20:1 Operating temperature: +5ºC to +50ºC RF cable termination: BNC female..

Beechcraft D18 1.5m BNF Basic, with AS3X & SAFE Select EFL 106250..

Beechcraft D18 1.5m PNP Electric Airplane EFL 106275..

BENDIXKING KT 74 AND KGX 150R ADS-B IN / OUT PACKAGE WITH ANTENNA KGX0150R-01..

BNC ANTENNA CONVERSION CONECTR AD98FSCBNC ANTENNA CONVERSION CONECTRProduct CodesMfr Part No:AD98FSCECCN:5A991SCHEDULE B CODE:8504409580..

BNC TRAY MOUNT RF ANTENNA CONNECTOR/Straight, BNC female connector, includes snap ring. 031-6728RF BNC Antenna Tray Mount Connector | Straight, BNC female, includes snap ringThis BNC antenna tray mount connector features a BNC push-on plug on one end and a BNC jack on the other. This connector includes a snap ring.Straight BNC female connectorIncludes snap ringProduct CodesMfr Part No:031-6728ECCN:EAR99SCHEDULE B CODE:8535.90.0040Impedance: 50Ω Frequency Range: DC – 4 GHz Dielectric Withstanding Voltage: 1,500 VRMS, minium Insertion Loss: 0.25 dB, max (when mated) Durability: 500 cycles, minimum Temperature Range: -65°C to 165° Materials: Body: nickel-plated, brass Outer contact: nickel-plated, BeCu Contact: gold-plated, BeCu Insulation: PTFE, natural color Retaining ring: zinc-plated, steel..

Body Reamer & Scissor (Curved) Set DUB 2330. FAA-approved aviation aftermarket part. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number DUB 2330 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

BROADBAND ANTENNA (P/N: AH-7000). Avionics antenna. Application: aviation aftermarket general fitment — verify part number against your aircraft IPC before ordering. Cross-reference this part by its manufacturer part number AH-7000 against your aircraft's illustrated parts catalog (IPC) or maintenance manual to confirm direct interchangeability. All inventory ships from our Arizona warehouse with FAA 8130-3 documentation where applicable, and traceability paperwork is available on request for parts requiring it. Live pricing, real-time stock status, and secure online checkout for this part are available at American Aviation Parts...

BROADBAND ANTENNA/30-512 MHZ, 50 OHMS, 50 watts cw, TNC female connector, gray. RAV30512GYRAV30512 Broadband Airborne Communications Antenna | 30 - 512 MHz, GrayThe RAV30512 is a broadband, airborne communications antenna that is designed for airspeeds less than Mach 1. The antenna housing is constructed from a fiberglass epoxy that is designed to withstand exposure to sand and dust particles in desert areas. Extreme temperature changes, humidity, shock and vibration are reduced due to its foam filled core.This communications antenna (Alternate Part# RAV30512GY) is painted gray.Mechanically and environmentally qualified to MIL-A-55680 (AT-1108) specificationsOperational altitude up to 50,000 feet and temperatures between -65°F and 131°FResistant to impacts of 30g and the steady-state acceleration of 6gUtilizes the same mounting pattern and footprint as the AT-1108/ARCIncludes a conductive mounting gasket Product CodesMfr Part No:RAV30512GYWeight: 3.5 lb, max Dimensions: 14.44 x 11.5 x 3.72 in Application: airborne communications Frequency: 30 MHz - 512 MHz Impedance: 50Ω, nominal Gain: -20 dBi @ 30 MHz to 0 dBi @ 300 MHz VSWR: 3.5:1, maximum Polarization: vertical Pattern: omni-directional Connector: TNC female RF Power Capacity: 50 watts CW Color: CARC Gray..

BROADBAND ANTENNA/30-512 MHZ, 50 OHMS, 50 watts, TNC female. Color: Gloss White. Designed for speeds less than Mach 1. RAV30512WRAV30512 Broadband Airborne Communications Antenna | 30 - 512 MHz, Gloss WhiteThe RAV30512 is a broadband, airborne communications antenna that is designed for airspeeds less than Mach 1. The antenna housing is constructed from a fiberglass epoxy that is designed to withstand exposure to sand and dust particles in desert areas. Extreme temperature changes, humidity, shock and vibration are reduced due to its foam filled core.This communications antenna (Alternate Part# RAV30512W) is painted gloss white.Mechanically and environmentally qualified to MIL-A-55680 (AT-1108) specificationsOperational altitude up to 50,000 feet and temperatures between -65°F and 131°FResistant to impacts of 30g and the steady-state acceleration of 6gUtilizes the same mounting pattern and footprint as the AT-1108/ARCIncludes a conductive mounting gasket Product CodesMfr Part No:RAV30512WWeight: 3.5 lb, max Dimensions: 14.44 x 11.5 x 3.72 in Application: airborne communications Frequency: 30 MHz - 512 MHz Impedance: 50Ω, nominal Gain: -20 dBi @ 30 MHz to 0 dBi @ 300 MHz VSWR: 3.5:1, maximum Polarization: vertical Pattern: omni-directional Connector: TNC female RF Power Capacity: 50 watts CW Color: CARC white..

BROADBAND/MULTIBAND C118-1DM C118 VHF Comm Broadband/Multi-band AntennaThe DM C118 antenna is a broadband multi-band VHF communications antenna.No product features currently available.Product CodesMfr Part No:C118-1ECCN:7A994NSN:5985-00-251-4315SCHEDULE B CODE:8526.10.6000..

BROADBEAMED HORN TYPE ANTENNA DM PN3-12/ABROADBEAMED HORN TYPE ANTENNA Product CodesMfr Part No:DM PN3-12/AECCN:7A994SCHEDULE B CODE:8526.10.6000TSO:C87..