Longer fulfillment
RE-RADIATING KIT/110V, With TNC connector L1/L2GHNRRKIT-TNC
RE-RADIATING KIT/110V, With TNC connector L1/L2GHNRRKIT-TNCL1/L2 Hanger Networked GPS Re-Radiating Kit | TNC Connectors, 110VAC Source Voltage, 5V Output
The L1/L2 networked hanger re-radiating GPS antenna kit includes the components or building a re-radiating system for distributing all major GNSS frequencies indoors. GNSS signals are received by the roof antenna, amplified, and then distributed inside the hanger. This GPS antenna consists of an active roof antenna, a re-radiating antenna, and a re-radiating amplifier with external power supply for powering the entire systems. In the standard network configuration, the re-radiating amplifier output (J1) is DC blocked.
This L1/L2 networked re-radiating kit (Alternate Part# L1/L2HNRRT) has TNC connectors.
Cable from the roof antenna and the re-radiating kit sold separately.
- High gain amplified roof antenna: provides 40 dB gain
- Re-Radiating amplifier with external power supply: provides 30 dB gain
- Optional kit mounting hardware
- Optional re-radiating variable gain amplifier
Product Codes | |
|---|---|
| Mfr Part No: | L1/L2GHNRRKIT-TNC |
Roof Antenna:Frequency: 1,500 MHz — 1,615 MHzAxial Ratio: 2.5 dBGain: 35 dB — 45 dB (40dB, typical)GPS L1 Bandwidth: 115 MHz, typicalGPS L2/L5 Bandwidth: 140 MHzFiltering: -30 to >80 dB (-45 dB, typical)Noise Figure: 3.0 dBOutput SWR: 2.0:1, typicalCharacteristic Impedance: 50ΩReq. DC Input V.: 37 mA, typical (50 mA, max.)Re-radiating Antenna:Frequency: 1,500 MHz — 1,615 MHzAxial Ratio: 2.5 dBPeak Gain: 3 dBic, min.GPS L1 Bandwidth: 115 MHz, typicalGPS L2/L5 Bandwidth: 140 MHz, typicalInput SWR: 2.0:1, typicalCharacteristic Impedance: 50ΩRe-Radiating Amplifier:Frequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 36 mA, typical (40 mA, max.)Gain: 29 dB — 31 dB (30 dB, typical)Input SWR: 2.0:1 2.0:1Noise Figure: L1: 2.0 dB L2: 4.25 dBBand Gain Flatness: 0.5 dB, typical (1.0 dB, max.)Group Delay: L1: 1.5 ns L2: 2.1 nsReverse Isolation: L1: -55 dB L2: -60 dBInput P1dB: L1: -21.5 dBm L2: -23.0 dBm3rd Order Intercept: -14 dBmSource Voltage Option: 110 VAC, Transformer (ITA Type A Wall Mount)Output Voltage Option: 5V @ 130 mAConnector Option: TNC connector
- Manufacturer Part #: L1/L2GHNRRKIT-TNC
$0.00