
Icom’s IC-A120 VHF Airband Mobile Transceiver introduces two features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition.
The IC-A120 also features an ON-Hook scan function that automatically starts scanning when the hand microphone is hooked on the microphone hanger. When a user takes the microphone OFF hook, the scanning stops at the priority channel or displayed channel. A Dualwatch function checks the priority and operating channels alternatively. Meets IP54 standards for dust protection and water-resistance.
This version (Alternate Part# IC-A120BE) includes a European base station with a 220-volt power supply and hand microphone.
Includes:
- European base station cabinet
- Hand microphone (HM-216)
- DC power cable
- Microphone hanger kit
- Mounting bracket kit
- Fuses
Features:
- Dot-matrix LCD display is easy to read with crisp, clear text
- Memory channels and other radio settings can be programmed from the front panel
- Provides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacing
- Built-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signals
- Automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time)
- IP54 dust-protection and water-resistant construction allows the IC-A120 to be used in open-air vehicles
- ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger
- Dualwatch feature checks the priority and operating channels alternatively while ON-Hook
- Provides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added — allowing for third-party wireless Bluetooth headsets to be used
- Third-party headsets can be used with the optional OPC-871A headset adapter
- Optional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built-in speaker
- The speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functions
- Compatible with 12- and 24- volt systems
- 36W (PEP) RF output power
- Power-on password protection
- PC programming capability
- CI-V Commands for external control
- VE-PG3 RoIP gateway for interconnecting with other radio devices
AI disclosure: this description was generated with AI assistance from this product's own listing data.
Product Codes | |
|---|---|
| Mfr Part No: | A120BE |
| ECCN: | 5A991 |
| SCHEDULE B CODE: | 8525.60.1025 |
Weight: 3.3 lb (1.5 kg)Dimensions: 6.3 x 1.8 x 6.9 in (161 x 45 x 175 mm)Frequency Range: 118 MHz - 136.99166 MHz, (IC-A120) 118 MHz - 136.975 MHz, (ICA120E)Channel Spacing: 25 kHz, 8.33 kHzType of Emission: 6K00A3E/5K60A3E (FCC/EXP), 6K00A3E (Industry Canada), (IC-A120) 6K80A3E/5K00A3E, (IC-A120E)Number of Memory Channels: 200Antenna Impedance: 50Ω, nominalAntenna Connector: SO-239Power Supply Requirement: 13.75VDC / 27.5VDC, negative groundCurrent Drain (13.75 VDC): 5.0A, Tx 4.0A, maximum audioOperating Temperature: -22°C to 140°F (-30°C to 60°C), (IC-A120) -20°C to 55°C, (IC-A120E)TRANSMITTER Output Power: 9 watt, carrier power, typical (IC-A120) 9 watt, ±1.5dB, (IC-A120E)Frequency Stability: ±5 ppm (IC-A120) ±1 ppm (IC-A120E)Modulation System: Last stage modulationsAudio Frequency Distortion: <10% @ 70% modulation (IC-A120) <10% @ 85% modulation +3dB (IC-A120E)Spurious Emissions: < -60dBc (IC-A120) 9 kHz to 30 MHz: < –46 dBm (IC-A120E) 30 MHz to 1 GHz: < –36 dBm (IC-A120E), for harmonics 1 GHz to 4 GHz: < –30 dBm (For Harmonics), < –40 dBm (For Non-Harmonics)RECEIVER Receiver System: Double conversion superheterodyneIntermediate Frequencies: 1st: 38.85 MHz 2nd: 450 kHzSensitivity: <1 µV (pd), @ 6dB S/N, (IC-A120) < -101 dBm, 12dB SINAD with CCITT, (IC-A120E)Squelch Sensitivity: < 0.35 µV (pd), (IC-A120) < -116 dBm, (IC-A120E)Spurious Response Rejection Ratio: > 5 mV (pd), (IC-A120) > 70 dBm, (IC-A120E)Audio Output Power: External Speaker: > 10 watts, @ 13.75 VDC with 8Ω load Side tone: > 100 mW, @ 13.75 VDC with 500Ω loadOutput Power: 9 watt, carrier power, typical (IC-A120) 9 watt, ±1.5dB, (IC-A120E)Frequency Stability: ±5 ppm (IC-A120) ±1 ppm (IC-A120E)Modulation System: Last stage modulationsAudio Frequency Distortion: <10% @ 70% modulation (IC-A120) <10% @ 85% modulation +3dB (IC-A120E)Spurious Emissions: < -60dBc (IC-A120) 9 kHz to 30 MHz: < –46 dBm (IC-A120E) 30 MHz to 1 GHz: < –36 dBm (IC-A120E), for harmonics 1 GHz to 4 GHz: < –30 dBm (For Harmonics), < –40 dBm (For Non-Harmonics)
- Stock: Out of Stock
- Manufacturer Part #: A120BE
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.