Longer fulfillment
SPRING-FAST MILITARY GROMMET EDGING/12.75 CUSTOM/0.070-0.093 thick/10 EA 04-M2252
SPRING-FAST MILITARY GROMMET EDGING/12.75 CUSTOM/0.070-0.093 thick/10 EA 04-M22529/2-4C-85NASM2259/2 Mil-Spec Composite Grommet Edging | Fits 0.070 – 0.093 inch panels
Spring-Fast Mil-Spec composite grommet edging is designed for the high performance needs of the defense industry for use on airframes, tactical vehicles & ground based electronics. Grommet Edging is FAA Approved and installs in seconds allowing for immediate wire routing — no adhesive curing, clean up, or inspections.The NASM2259/2 series features an abrasion resistant subsurface and a polymer cushion to provided a soft surface for protecting wires and cables.
This NASM2259/2 Mil-Spec grommet edging (Alternate Part# M/2-4C-85):
- Fits panel thicknesses of 0.070 – 0.093 inches
- Width: 0.24 inches
- Comes in 12.75 inch lengths (quantity 10)
Features:
- Meets military specifications
- FAA Approved
- Continuous heat up to 185°F (85°C)
- Temperature operation as low as -40°F (-40°C)
- High Corrosion Resistance
- UL94 V-0 flammability rating
- High shock and vibration resistance to RMS G 41.7
- Superior dielectric strength
- Continuous edge protection for 90° inside and outside corners
- Continuous edge protection on inside and outside radius of any size
Product Codes | |
---|---|
Mfr Part No: | 04-M22529/2-4C-85 |
MIL SPEC: | M22529/2-4C-85 |
ECCN: | EAR99 |
MIL SPEC: | M22529/2-4C-85 |
SCHEDULE B CODE: | 7326.90.8595 |
Sheet Thickness: 0.070 – 0.093 in (1.80 – 2.40 mm)Width: 0.24 in (6.10 mm)Axis Conformity: 2Vicat Softening Point per ASTM D01525 Rate B: Thermoplastic Elastomer CushionOperating Temperature: -40°F to 185°F (-40°C to 85°C)Dielectric Strength: 1,500 volt @ 60 HzSubstrate: Type 304 Stainless SteelTaber Abrasion Resistance: TPE Cushion Per D1044 1 kg load, C17 wheel 25 mg 1,000 cyclesFinish: Epoxy Color:Lime green FED STD 595 Color Number: 14553Salt Spray Hours: 2,000 hr, ASTM B117.MIL-STD-202, Method 301Immersion: Per NASM22529 and Skydrol CompatibleRandom Shock & Vibration: MIL-STD-1344, Method 2005.1 Test Condition VI, Letter J Duration 8 hr longitudinal and 8 hr perpendicular. rms 41.7Flammability: UL94V-0 - File No. E113553 NZMT2 MIL-STD-202F, Method 111A FAR 25.853 Telcordia GR63 Core
- Manufacturer Part #: AAP202820
$0.00