The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities.
Using the Fluke VCHEKâ„¢ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. LoZ low impedance measurements also block ghost voltages induced by nearby conductors.
Includes:
Fluke TL75 test leads, Holster, Users manual, and 9 V battery (installed)
Features:
- VCHEKâ„¢ LoZ low impedance measurement function to simultaneously test for voltage or continuity*
- True RMS for accurate AC measurements on non-linear loads
- A large backlit display allows for easy visibility in low-lit areas
- Record signal fluctuations using the Min/Max function
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Integral holster with probe holders for easy storage
- Auto and Manual ranging for added user functionality
Product Codes | |
|---|---|
| Mfr Part No: | FLUKE 113 |
Weight: 13.0 oz (404 g)Dimensions: 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)Maximum voltage: 600 V (between any terminal and earth ground)Display: 3 3/4-digits, 6000 counts, updates 4/secOperating temperature: -10°C to 50°C (14°F to 122°F)Storage temperature: -40°C to 60°C (-22°F to 140°F)Temperature coefficient: 0.1 x (specified accuracy) / °C (< 18°C or > 28°C)Operating altitude: 2,000 mStorage altitude: 10,000 mRelative humidity: 95% to 30°C 75% to 40°C 45% to 50°CBattery type: 9 Volt Alkaline, IEC 6F22Battery life: 300 hours typical, without backlightSafety: IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT III 600VEMI regulations: Complies with FCC Part 15, Class BVCHEK: Range: 6.000 V / 60.00 V / 600.0 V Resolution: 0.001 V / 0.01 V/ 0.1 V Accuracy: DC, 45 to 500 Hz: 2.0% + 3 / 500 Hz to 1 kHz: 4.0% + 3Diode test: Range: 2.000 V Resolution: 0.001 V Accuracy: 2.0% + 3Continuity: Accuracy: Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longerOhms: Range: 600.0 Ω / 6.000 kΩ / 60.00 kΩ Resolution: 0.1 Ω / 0.001 kΩ / 0.01 kΩ Accuracy: 0.9% + 2 / 0.9% + 1 / 0.9% + 1Capacitance: Range: 1000 nF / 10.00 μF / 100.0 μF / 9999 μF Resolution: 1 nF / 0.01 μF / 0.1 μF / 1 μF Accuracy: 1.9% + 2 / 100 μF - 1000 μF: 1.9% + 2 / 1000 μF: 5% + 20
- Stock: Out of Stock
- Manufacturer Part #: FLUKE 113
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
