Nulite LED aircraft instrument lights use bright, long-lasting LEDs inside of a special bezel that focuses light toward the instrument, rather than toward the pilot’s eyes. These lighting systems replicate the appearance of an internal lighting kit without the additional cost and install time. Nulite light wedges are installed between the instrument and the panel, effectively reducing glare and hotspots by concentrating 60% of the light toward the upper half of the instrument. These light wedges are available in different sizes and cutout arrangements to fit most instruments and will work with existing dimming systems. Nulite lighting can be installed within a matter of minutes.
This Nulite light wedge (Alternate Part# LW3034AA) fits over 3-1/8 inch standard instruments, altimeter cut out, and 14-volt operates.
- Fits over 3-1/8 inch standard instruments
- Altimeter cutout
- 14-volt operates
- LED lighting
Product Codes | |
|---|---|
| Mfr Part No: | LW3034AA |
| ECCN: | EAR99 |
| SCHEDULE B CODE: | 9014.20.8040 |
Mounting Hole Size: 3-1/8 inOperating voltage: 14VCutout: Altimeter cutout
- Stock: Warehouse
- Manufacturer Part #: LW3034AA
