RUGGED DIGITAL MULTIMETER/Up to 1000 V AC/DC, up to 10 A (20 a for 30 seconds), 10,000 uF capacitance range, 200 kHz, extended AC voltage bandwidth- 40 HZ to 30 kHz, resistance, continuity and diode test, min-max-average recording. FLUKE 27-IIFluke 27 II Rugged Digital MultimeterThe Fluke 27 II Digi..
ROLL/YAW SERVO 065-0060-09KS-271A Replacement Roll/Yaw ServoThe KS-271A Roll/Yaw Servo is a replacement for the Bendixking KS-271 servo. This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Roll/Yaw Servo used in KFC-200, KFC-250, and KFC-250A Autopilot SystemElectrically..
ROLL/YAW SERVO 065-0060-05KS-271A Replacement Roll/Yaw Servo | 4 RPMThe KS-271A Roll/Yaw Servo is a replacement for the Bendixking KS-271 (part# 065-0028-05) servo at 4 rpm. This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Replacement for KS-270 065-0028-05 at 4 RPM
R..
ROLL/YAW SERVO 065-00060-0004KS 271A Replacement Servo | 15 RPMThe KS-271A Roll/Yaw Servo is a replacement for the Bendixking KS-270 servo (part# 065-0028-04) at 15 rpm. This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Roll/Yaw Servo used in KFC-200, KFC-250, and KFC-..
ROLL/YAW SERVO 065-00060-0003KS 271A Replacement Servo | 2.5 RPMThe KS-271A Roll/Yaw Servo is a replacement for the Bendixking KS-271 servo at 5 rpm. This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Roll/Yaw Servo used in KFC-200, KFC-250, and KFC-250A Autopilot Syste..
ROLL/YAW SERVO 065-00060-0001KS 271A Replacement Servo | 5 RPMThe KS-271A Roll/Yaw Servo is a replacement for the Bendixking KS-271 (part# 065-0028-01) servo at 5 rpm. This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Roll/Yaw Servo used in KFC-200, KFC-250, and KFC-25..
RING TERMINAL/Female, not insulated, tin plating, copper material, 1/4 stud, maximum bundle, straight angle. For use with 1/0 gauge wire. 36915 pack of 100RING TERMINAL/Female, not insulated, tin plating, copper material, 1/4 stud, maximum bundle, straight angle. For use with 1/0 gauge wire.Solist..
RING TERMINAL/#8 stud/tab size, female, not insulated, tin plating, copper material, 4.37 mm maximum bundle diameter. For use with 8 gauge wire. 32996 pack of 100#8 SOLISTRAND Ring Terminal | 8 AWG wire, #8 stud sizeSOLISTRAND terminals and splices are used to terminate solid and strained wire and i..
RING TERMINAL/#2 stud size, crimp, female, not insulated, tin plating, copper material, 11.79 mm in length, straight angle, wire mount. For use with 26-22 gauge wire. 31518 pack of 100#2 SOLISTRAND Ring Terminal | 26–22 AWG wire, #2 stud sizeSOLISTRAND terminals and splices are used to terminate s..
RIGID BACK PROBE PINS TP88Fluke TP88 Rigid Back Probe PinsBetter than a test probe alone, the Fluke TP88 Rigid Back Probe Pins are two-inch long rigid probe pins that easily pass between the weather pack seal and wire. A sharp point ensures good contact with the electrical connector, and the pin's i..
REMOTE DISPLAY DIGITAL MULTIMETER INCLUDES CALIBRATION/True RMS AC voltage, up to 1000 VAC and DC, up to 10 A (20 A for 30 seconds), 10,000 uF capactitance range, 50kHz, built in thermometer, resistance, continuity and diode test, removable and magnetic display, auto power off, mix-max-average recor..
RELAY/MS24178-D1 MS24178MS24178-D1 Relay | 55AContinuous duty, gasketed, powered relay with non-latching solenoid design. Operates at 28 VDC, 55 amp current.Product CodesMfr Part No:MS24178ECCN:EAR99SCHEDULE B CODE:8536.41.0020Weight:
340.91 g (0.75 lb)Dimensions:
2.922 x 2.844 x 2.031 in (74.22 x..
RAMLAIR KITW14V14V 071-04037-0000KA 33 Avionics Cooling Fan | 14VThe KA 33 Avionics Cooling Fan is ideal for avionics equipment concentrated in a stack configuration of three or more. This unit features virtually silent operation with its magnetically commutated fan motor and provides internal sourc..
PROCESS CALIBRATOR with CALIBRATION/Documenting process, current, frequency, pressure, resistance, temperature, voltage. FLUKE-754 CALFluke 854 Documenting Process Calibrator with HART®The Fluke 754 Documenting Process Calibrator is a powerful multifunction documenting calibrator that can download..