Longer fulfillment
HF TRANSCEIVER IC-718 22
HF TRANSCEIVER IC-718 22IC-718 HF All Band Transceiver
The IC-718 HF All Band Transceiver provides radio communications over long distances — even to the other side of the world. This all band transceiver features a wide dynamic rage, high C/N ratio, and full duty operation. A front mounted speaker provides clear audio while onboard DSP capability includes outstanding noise reduction and an automatic notch filter.
- Front-mounted speaker with DSP capabilities
- IF-shift interference rejection
- Adjustable microphone compression
- RF gain control with squelch control
- CW feature include electronic keyer with a variable dot/dash ratio
- VOX operation provides hands-free operation
- Flexible filter selection
- High frequency stability
- Selectable antenna tuner
- Simple operation
- Built-in multi-functional digital S/RF meter
- Option voice synthesizer announce operating frequency, mode, and signal level
- USB, LSB, CW, RTTY(FSK) and AM modes are built-in
- Level adjustable noise blanker
- RF attenuator and Pre-amplifier
- Variety of scanning function types
- Total 101 memory channels are available
- Hand microphone is supplied
Product Codes | |
---|---|
Mfr Part No: | IC-718 22 |
ECCN: | 5A991 |
SCHEDULE B CODE: | 8525203030 |
Weight: 3.8 kg (8 lb 6 oz)Dimensions: 240 x 95 x 239 mm (9-7/16 x 3-3/4 x 9-13/32 in)Frequency Range: Rx: 0.030 MHz – 29.999999 MHz Tx: 1.800 MHz - 1.999999 MHz 3.500 MHz - 3.999999 MHz 7.000 MHz - 7.300000 MHz 10.100 MHz - 10.150000 MHz 14.000 MHz - 14.350000 MHz 18.068 MHz - 18.168000 MHz 21.000 MHz - 21.450000 MHz 24.890 MHz - 24.990000 MHz 28.000 MHz - 29.700000 MHzMode: USB, LSB, CW, RTTY (FSK), AMNumber of Memory Channels: 101 (99 regular, 2 scan edges)Frequency Resolution: 1 HzPower Supply Requirement: 13.8 V DC ±15% (negative ground)Current Drain (at 13.8 VDC): Standy-by: 1.3A Receive (max. audio): 2.0A Transmit (max. power): 20A Temperature: -10°C to 60°C (14°F to 140°F)Antenna Connector: SO-239 (50Ω)ACC connector: 13-pinRemote Connector: 2-connector, 3.5 mm (1/8)TRANSMITTER:Modulation System: SSB: Balanced modulation AM: Low level modulation  Output Power: SSB, CW, RTTY: 2 – 100 watts AM: 2 – 100 wattsSpurious emissions: Less than -50 dB below peak output powerSpurious Emissions: Below 30 MHz: -50 dB Above 30 MHz: -60 dBCarrier suppression: More than 40 dBUnwanted sideband: More than 50 dBMicrophone connector: 8-pin connector (600Ω)KEY connector: 3-conductor 6.5 mm (1/4 in)SEND connector: Phono (RCA)ALC connector: Phono (RCA)RECEIVER:Receiving system: Double conversion superheterodyneSensitivity (10 dB S/N): SSB, CW, RTTY: 0.16 µV (1.8 MHz – 29.999999 MHz) AM: 13 µV (0.5 MHz –1.799999 MHz) 2 µV (1.8 MHz – 29.999999 MHz)SQL sensitivity: Less than 5.6 µV (SSB)Selectivity: SSB,CW, RTTy: More than 2.1 kHz/-6 dB Less than 4.5 kHz/-60 dB AM: More than 6.0 kHz/-6 dB Less than 20 kHz/-40 dBSpurious and image rejection: More than 70 dB (1.8 MHz – 29.999999 MHz)Audio Output Power 13.8 VDC: More than 2.0W at 10% distortion with an 8Ω loadRIT Variable Range: ±1200 HzPhones Connector: 3-connector 6.5 mm (1/4 in)EXT Speaker Connector: 2-connector 3.5 mm (1/8 in) / 8ΩSUPPLIED ACCESSORIES: Hand Microphone DC Power Cable Spare Fuses
- Manufacturer Part #: IC-718 22
$0.00