Menu
Your Cart

GPS L1 Variable Gain Networked Portable Re-Radiating Kit Vgpnrrkit-Tnc/5/110

GPS L1 Variable Gain Networked Portable Re-Radiating Kit Vgpnrrkit-Tnc/5/110
Out of Stock
GPS L1 Variable Gain Networked Portable Re-Radiating Kit Vgpnrrkit-Tnc/5/110
GPS L1 VARIABLE GAIN NETWORKED PORTABLE RE-RADIATING KIT VGPNRRKIT-TNC/5/110
Variable Gain Portable Networked Re-Radiating Kit | 30 dB Gain, TNC Connector, 5V Output, 110VAC Supply

This GPS portable networked re-radiating kit is designed in places where an L1 antenna is already in place. The re-radiating kit receives an existing L1 signal and amplifies it then distributes the GPS signal indoors. The GPS re-radiating kit includes a passive antenna and amplifier with an external power supply for power the entire system. In the standard networked configuration, the re-radiating amplifier output port (J1) is DC blocked while the antenna port receives the RF signal and passes voltage back through to the antenna. 


  • Re-Radiating amplifier with external power supply with 30 dB gain
  • Optional kit mounting hardware
  • Optional variable gain amplifier from 1 dB — 30 dB

Product Codes

Mfr Part No:VGPNRRKIT-TNC/5/110


Re-Radiating Antenna Specifications:Weight (antenna): 1.7 oz (48 g)Dimensions (antenna): 0.67 x 2.6 x 2.6 inFrequency Range: L1 band: 1.572 GHz — 1.587 GHzAxial Ratio: 3 dBPeak Gain: 4 dBicBandwidth: 20 MHzInput SWR: 1.5:1Characteristic Impedance: 50ΩPolarization: Right hand circular polarizationConnector Option: SMA typeRe-Radiating Amplifier Specifications:Weight (amplifier): 9.9 oz (281 g)Dimensions (amplifier): 1.25 x 3.26 x 2.5 inFrequency Range: 1.1 GHz to 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 36 mA, typical (40 mA, max.)Gain: 29 dB — 30 dB, (30 dB typical)Input SWR: 2.0:1Output SWR: 1.8:1, typical (2.0:1, max.)Noise Figure: L1: 2.0 dB L2: 4.25 dBBand Gain Flatness: 0.5 dB, typical (1 dB, max.)Group Delay: L1: 1.5 ns L2: 2.1 nsReverse Isolation: L1: -55 dB L2: -60 dBInput P1dB: L1: -21.5 dBm L2: -23 dBm3rd Order Intercept: -13 dBmSource Voltage Option: 110 VAC, Transformer (ITA Type A Wall Mount)Output Voltage Option: 5V @ 130 mAConnector Option: TNC type

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Out of Stock
  • Manufacturer Part #: VGPNRRKIT-TNC/5/110
$630.50

Aircraft Fitment Finder

Returns & refund summary

  • 30-day return window — with prior return authorization, unopened in original packaging.
  • Restocking fee: 20% on unopened items, 30% on open-box items.
  • Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
  • Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
  • Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.

Full terms: Return Policy.

Authenticity & authorization

We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.

See our full Manufacturer Authorizations page for the current per-brand status.

Need traceability paperwork?

If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.

Shipping

Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.