The RMALDCBS1X32 Rack Mount Amplified 1X32 GPS Splitter (GNSS Splitter) is a one input, thirty-two output device. The frequency response covers the entire L-band (all GPS/GNSS frequencies) with excellent gain flatness. In the standard configuration, the splitter is powered by the receiver connected to the J1 port that powers the splitter's internal amplifier and outdoor antenna. The other outputs are DC blocked and loaded with 200Ω resistors to simulate the antenna current draw to prevent false antenna alarm faults. Ideally suited for timing and testing applications where the GPS/GNSS signal is required by as many as 16 devices simultaneously.
The NHIRMALD32 is a High Isolation 32 output splitter.
- Excellent Gain Flatness
- Extremely Flat Group Delay
- Amplified 14dB gain typical
- High Isolation Option
- DC Blocked Outputs feature 200 ohm loads
- Phase Matched Outputs
- Durable Rugged Standard 3U Chassis
- LED Power Light
Product Codes | |
|---|---|
| Mfr Part No: | NHIRMALDCBS1X32: S/0.0/110 |
Weight: 15.6 lbDimensions: 17 x 8.5 x 5.25 in.Operating temperature: -40ºC to +75ºCFrequency range: 1.1-1.7 GHzImpedance: 50ΩGain: 14.5 dB typicalGain high isolation: 0 dBCurrent: 15 mAInput voltage: 110 VACConnector: SMA
- Stock: Out of Stock
- Manufacturer Part #: NHIRMALDCBS1X32: S/0.0/110
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
