Menu
Your Cart

GPS Splitter / Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. Connector Tnc. LNFA1X4-T

GPS Splitter / Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. Connector Tnc.   LNFA1X4-T
Out of Stock - On Backorder
GPS Splitter / Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. Connector Tnc. LNFA1X4-T
GPS SPLITTER / Low Noise Filtered Amplified GPS Splitter is a one input, four output device with 0dB nominal gain. Connector TNC. LNFA1X4-T
Low Noise Filtered Amplified GPS Splitter | 1 Input, 4 Output, TNC Connector

This low noise amplified GPS splitter features one input and four outputs for distributing filtered L1 GPS frequencies indoors with a nominal 0 db gain. A low noise input provides an excellent overall  system noise figure. Padded outputs provide excellent port-to-port isolation and unity gain. Excellency frequency selection of the L1 band prevents interference from other high power radio sources. A five-volt power source connected on any of the RF output will power the splitter as well as an external GPS antenna. If multiple DC sources are connected then a "pick and choose" circuit will select one source to power the system, and the remain ports are switched to a 200Ω resistor to prevent antenna alarm faults.
 

This low noise filtered amplified GPS splitter (Alternate Part# LNFA1X4-T) has one-input & two-outputs, and has TNC connectors. 


  • Low Noise
  • Amplified unity gain 0 dB (typical)
  • Filters L1 GPS frequency band
  • Extremely flat group delay: <1 ns variation between ports
  • High isolation between ports
  • 200Ω loads block DC preventing antenna alarm faults
  • Excellent gain flatness

Product Codes

Mfr Part No:LNFA1X4-T


Weight: 20.9  oz (593 g)Dimensions: 1.4 x 6.75 x 2.5 in, max. (not including connectors)Operating Temperature: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 6 VDCCurrent Draw: 7 mAGain: -1.5 dB to 1.5 dBInput SWR: 2.0:1, max.Output SWR: 2.0:1, max.Filter Bandwidth: 30 MHz, typicalRejection: -60 dB, typicalL1 Noise Figure: 4.75 dB, typicalAmplitude Balance: 1.0 dB, max.Phase Balance: 6°, typicalIsolation: 50 dB, typical (>61 dB, max.)Input P1dB: -31.5 dBmConnector Option: TNC type

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Out of Stock - On Backorder
  • Manufacturer Part #: LNFA1X4-T
$865.73

Aircraft Fitment Finder

Returns & refund summary

  • 30-day return window — with prior return authorization, unopened in original packaging.
  • Restocking fee: 20% on unopened items, 30% on open-box items.
  • Refund processing fee: 5.51% applies to all refunds (returns, cancellations, core-fee refunds) regardless of reason.
  • Return shipping: paid by buyer.
  • Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.

Full terms: Return Policy.

Authenticity & authorization

All parts sold by American Aviation Parts are genuine factory products sourced through authorized distribution channels. Our authorization status varies by brand — for some brands we are a direct authorized dealer; for others we are an independent reseller through authorized distribution. Either way, the part you receive is the same factory product, with standard documentation available on request.

See our full Manufacturer Authorizations page for the current per-brand status.

Need traceability paperwork?

If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.

Shipping

Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.