The Fluke 190 series III ScopeMeter is a portable oscilloscope that offers technicians a precision troubleshooting tool they can take with them to any job site. This category III/IV rated test tool features fast sample rates and deep memory per channel allowing for a very high capture rate for accurate measurements. Available in either a 2- or 4-channel version, the Fluke 190 features TrendPlotâ„¢ Paperless Recorder, ScopeRecordâ„¢ mode, Connect-and-viewâ„¢ triggering, and a unique 100-screen Replay function to help quickly diagnose issues and minimize repair cost and downtime. This tool is simple to use when diagnosing difficult concepts like complex waveforms, induced noise, intermittent events and signal fluctuations or drift.
This Fluke 190 Includes (Alternate Part# FLUKE-190):
- ScopeMeter 190-102-III
- BC190/830 power adapter
- Power cord set
- BP290 Li-ion battery pack
- TL175 test lead set
- VPS421 probe (2x)
- Hand strap
- Hanging strap
- USB-cable
- CXT293 carrying case
- DWA-131 WiFi dongle
- FlukeView Activation instructions (paper)
- Printed instructions
Features:
- Up to four independent isolated inputs, up to 1,000V
- Up to 5 GS/s real time sampling (model depending)
- Deep Memory: 10,000 points per trace waveform capture (scope model)
- CAT III 1,000V/CAT IV 600V safety rated instruments for industrial environments
- Up to seven hours of battery operation using BP291
- Easy-to-view large, bright color display
- Easy-to-store and view historical data and transfer to a PC over USB or WiFi
- Convenient battery access door for quick battery swaps
- IP51 rating, dust and drip-proof protection
- Connect-and-view triggering for intelligent, automatic triggering on fast, slow and complex signals
- Frequency spectrum using FFT-analysis
- Automatic capture and REPLAY of 100 screens
- ScopeRecord mode gives 30,000 points per input channel
- Trend Plot Paperless record mode with deep memory for long-term automatic measurements
- 5,000 count DMM in includes in the 2-channel models
Product Codes | |
|---|---|
| Mfr Part No: | FLUKE-190-202-III-S |
Weight: 4.6 lb (2.1 kg)Dimensions: 10.5 x 7.6 x 2.8 in (265 x 192 x 70 mm)Display Resolution: 1120 x 765 pxBattery Power: Re-chargeable Li-Ion battery (included). Battery swappable through easily accessible battery door at the rear of the instrumentNumber of Channels: 2Bandwidth: 200 MHzRise Time: 1.7 nsNumber of Scope Inputs: 2 channels plus external triggerChannel Architecture: all inputs insulated from each other and from groundInput Coupling: AC or DC, with ground level indicatorInput Sensitivity: with 10:1 probe, 20 mV to 1,000V/div with 100:1 probe, 200 mV to 10kV/div Direct (1:1), 2 mV to 100V/divBandwidth Limiter: 20 MHz and 10 kHzPolarity: normal, inverted, variableInput Voltage: CAT III 1000 V/CAT IV 600 V ratedVertical Resolution: 8 bitAccuracy at 4 sec. to 10 µs/div: 5 mV/div to 100 V/div, ±(1.5 % + 6 counts) 2 mV/div, ±(1.5 % + 10 counts)Input Impedance: 1 MΩ (±1 %) // 15 pF (±2.25 pF)Maximum Sample Rate: 2.5 GS/s (each channel)Record Length: up to 10,000 samples per channelTime Base Range: 2 ns/div to 4 s/divTiming Accuracy: ±(0.01% of reading + 1 pixel)Glitch Capture: 8 ns (10 µs/div to 2 min/div)Display Resolution: 133 x 90 mm, full-color & high brightnessDisplay Modes: any combination of channels; average on/off, replayVisible Screen Width: 12 divisions horizontal in scope modeDigital Persistence Mode: off, short, medium, long, infinite and envelope modeAcquisition Modes: Normal, Averaged, Auto, Single Shot, ScopeRecordâ„¢ roll, glitch capture, waveform compare with automatic “Pass/Fail testingâ€; ReplayCompliance: EN61010-1, Pollution Degree 2; IEC 61010-2-030: CAT IV 600 V / CAT III 1000 VIncluded Accessories: ScopeMeter 190-102-III BC190/830 power adapter Power cord set BP290 Li-ion battery pack TL175 test lead set VPS421 probe (2x) Hand strap Hanging strap USB-cable CXT293 carrying case DWA-131 WiFi dongle FlukeView Activation instructions (paper) Printed instructions
- Stock: Out of Stock
- Manufacturer Part #: FLUKE-190-202-III-S
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
