The HIALDCBS1X8 GPS High Isolated Amplified Splitter is a one input, eight output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS frequencies) with excellent gain flatness. In the standard configuration without external power, Output 1 (J1) passes DC from the connected GPS device through the splitter to the input (antenna port), allowing the GPS receiver to power both an active antenna and the splitter’s internal amplifier. The other RF outputs (J2-J8) are DC blocked and loaded with 200Ω resistors to simulate the antenna current draw to prevent false antenna alarm faults.
- Excellent Gain Flatness (J1-J8) < 1.0dB
- Extremely Flat Group Delay Less than 1ns variation
- Amplifier Gain 4dB typical
- Passes all GNSS frequencies (entire L-band)
- DC blocked outputs feature 200Ω Loads
- Phase matched outputs phase (J1-J8) < 1.0°
Product Codes | |
|---|---|
| Mfr Part No: | NHIALDCBS1X8-T/5/MC |
Weight: 14 ozDimensions: 5.25 x 2.5 x 1.3 in.Frequency range: 1.1 to 1.7 GHzImpedance: 50ΩGain: 4.5 typicalInput SWR: 50Ω 2.0:1Output SWR: 50Ω 1.5:1Noise figure: 4 dB typical
- Stock: Out of Stock
- Manufacturer Part #: NHIALDCBS1X8-T/5/MC
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
