The IC-A120BT air band radio provides active noise cancelling and Bluetooth audio with an included UT-133 Bluetooth module. Active noise cancellation (ANC) reduces background noise making the IC-120 ideal for extremely loud environments. Automatic noise limiter is effective at reducing pulse-type sounds such as engine ignition. Additionally, the included UT-133 bluetooth unit allows connectivity to third-party wireless Bluetooth devices.
The IC-A120 also features an ON-Hook scan function that automatically starts scanning when the hand microphone is hooked on the microphone hanger. When a user takes the microphone OFF hook, the scanning stops at the priority channel or displayed channel. The dual watch function checks the priority and operating channels alternatively. Meets IP54 standards for dust protection and water-resistance.
This IC-A120 VHF air band transceiver (Alternate Part# IC-A120BT) includes the UT-133 Bluetooth unit and a s mount.
Includes:
- UT-133 bluetooth module
- Vehicle mount
- Hand microphone (HM-216)
- DC power cable
- Microphone hanger kit
- Mounting bracket kit
- Fuses
Features:
- Dot-matrix LCD display is easy to read with crisp, clear text
- Memory channels and other radio settings can be programmed from the front panel
- Provides 200 memory channels with 12-character channel names and 8.33 kHz and 25 kHz channel spacing
- Built-in Active Noise Canceling (ANC) reduces background noise in the received and transmitted signals
- Automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition (ANL and ANC functions cannot be used at the same time)
- IP54 dust-protection and water-resistant construction allows the IC-A120 to be used in open-air vehicles
- ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger
- Dualwatch feature checks the priority and operating channels alternatively while ON-Hook
- Provides optional Bluetooth® headset connectivity when the UT-133 Bluetooth unit is added — allowing for third-party wireless Bluetooth headsets to be used
- Third-party headsets can be used with the optional OPC-871A headset adapter
- Optional HM-217 speaker-microphone allows the user to listen to received audio through the HM-217’s built-in speaker
- The speaker-microphone features up/down buttons as well as two programmable P1/P2 buttons that serve as a shortcut for activating frequently used functions
- Compatible with 12- and 24- volt systems
- 36W (PEP) RF output power
- Power-on password protection
- PC programming capability
- CI-V Commands for external control
- VE-PG3 RoIP gateway for interconnecting with other radio devices
Product Codes | |
|---|---|
| Mfr Part No: | IC-A120BT |
Weight: 1.5 kg (3.3 lb)Dimensions: 161 x 45 x 193 mm (6.34 x 1.77 x 7.6 in)Frequency Range: 118.000 to 136.992 MHzChannel Spacing: 25 kHz/8.33 kHzType of Emission: A3E (AM)Number of Memory Channels: 200 channelsAntenna Connector: M type (50Ω)Power Supply Requirement: 13.75 V/27.5 VDCCurrent Drain (at 13.75 VDC): Transmitting: 5.0 A max. Receiving: 4.0 A (at AF max.), 0.5 A at standbyOperating Temperature Range: -30°C to 60°CFrequency Stability: ±5 ppm (-30°C to 60°C)TRANSMITTER Output Power (at 13.75V): 9.0 watts typical (carrier power)Modulation: 70% to 100%Spurious Emission: less than 60 dB (harmonics/non-harmonics, 30MHz to 1 GHz)Microphone Impedance: 600ΩRECEIVER Intermediate Frequency: 38.85 MHz/450 kHz (1st/2nd)Sensitivity (pd): 1 µV (6 dB S/N)Selectivity: 8.33 kHz: 2.778/7.37 kHz (6 dB/ 60 dB) 25 kHz: 8/25 kHz (6 dB/60 dB)Spurious Response: more than 74 dBµAudio Output Power: 10% distortion, 60% modulationInternal Speaker: 1.5 watt (8Ω load)External Speaker: more than 10 watt (8Ω load)Headphones: more than 100 mW (500Ω load)Applicable IP Rating: dust and water: IP54 (dust-protection and water resistance)
- Manufacturer Part #: IC-A120BT
