GPS L1 VARIABLE GAIN NETWORKED PORTABLE RE-RADIATING KIT VGPNRRKIT-TNC/5/110Variable Gain Portable Networked Re-Radiating Kit | 30 dB Gain, TNC Connector, 5V Output, 110VAC SupplyThis GPS portable networked re-radiating kit is designed in places where an L1 antenna is already in place. The re-radiating kit receives an existing L1 signal and amplifies it then distributes the GPS signal indoors. The GPS re-radiating kit includes a passive antenna and amplifier with an external power supply for power the entire system. In the standard networked configuration, the re-radiating amplifier output port (J1) is DC blocked while the antenna port receives the RF signal and passes voltage back through to the antenna. Re-Radiating amplifier with external power supply with 30 dB gainOptional kit mounting hardwareOptional variable gain amplifier from 1 dB — 30 dBProduct CodesMfr Part No:VGPNRRKIT-TNC/5/110Re-Radiating Antenna Specifications: Weight (antenna): 1.7 oz (48 g) Dimensions (antenna): 0.67 x 2.6 x 2.6 in Frequency Range: L1 band: 1.572 GHz — 1.587 GHz Axial Ratio: 3 dB Peak Gain: 4 dBic Bandwidth: 20 MHz Input SWR: 1.5:1 Characteristic Impedance: 50Ω Polarization: Right hand circular polarization Connector Option: SMA type Re-Radiating Amplifier Specifications: Weight (amplifier): 9.9 oz (281 g) Dimensions (amplifier): 1.25 x 3.26 x 2.5 in Frequency Range: 1.1 GHz to 1.7 GHz Characteristic Impedance: 50Ω Req. DC Input V.: 3.3 VDC — 15 VDC Current Draw: 36 mA, typical (40 mA, max.) Gain: 29 dB — 30 dB, (30 dB typical) Input SWR: 2.0:1 Output SWR: 1.8:1, typical (2.0:1, max.) Noise Figure: L1: 2.0 dB L2: 4.25 dB Band Gain Flatness: 0.5 dB, typical (1 dB, max.) Group Delay: L1: 1.5 ns L2: 2.1 ns Reverse Isolation: L1: -55 dB L2: -60 dB Input P1dB: L1: -21.5 dBm L2: -23 dBm 3rd Order Intercept: -13 dBm Source Voltage Option: 110 VAC, Transformer (ITA Type A Wall Mount) Output Voltage Option: 5V @ 130 mA Connector Option: TNC type..