Spring-Fast Mil-Spec composite grommet edging is designed for the high performance needs of the defense industry for use on airframes, tactical vehicles & ground based electronics. Grommet Edging is FAA Approved and installs in seconds allowing for immediate wire routing — no adhesive curing, clean up, or inspections. The NASM2259/2 series features an abrasion resistant subsurface and a polymer cushion to provided a soft surface for protecting wires and cables.
- Meets military specifications
- FAA Approved
- Continuous heat up to 185°F (85°C)
- Temperature operation as low as -40°F (-40°C)
- High Corrosion Resistance
- UL94 V-0 flammability rating
- High shock and vibration resistance to RMS G 41.7
- Superior dielectric strength
- Continuous edge protection for 90° inside and outside corners
- Continuous edge protection on inside and outside radius of any size
Product Codes | |
|---|---|
| Mfr Part No: | M22529/2-8C-24 |
Sheet Thickness: 0.240 - 0.260 in (6.10 - 6.60 mm)Width: 0.38 inches (9.70 mm)Axis Conformity: 2Vicat Softening Point per ASTM D01525 Rate B: Thermoplastic Elastomer CushionOperating Temperature: -40°F to 185°F (-40°C to 85°C)Dielectric Strength: 1,500 volt @ 60 HzSubstrate: Type 304 Stainless SteelTaber Abrasion Resistance: TPE Cushion Per D1044 1 kg load, C17 wheel 25 mg 1,000 cyclesFinish: EpoxyColor: Lime green FED STD 595Color Number:Â 14553Salt Spray Hours: 2,000 hr, ASTM B117.MIL-STD-202, Method 301Immersion: Per NASM22529 and Skydrol CompatibleRandom Shock & Vibration: MIL-STD-1344, Method 2005.1 Test Condition VI, Letter J Duration 8 hr longitudinal and 8 hr perpendicular. rms 41.7Flammability: UL94V-0 - File No. E113553 NZMT2 MIL-STD-202F, Method 111A FAR 25.853 Telcordia GR63 Core
- Stock: Out of Stock
- Manufacturer Part #: M22529/2-8C-24
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
