This Military Qualified Hi-Isolation amplified network loaded DC blocked GPS splitter features one input and two outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. Mil-Specs splitters are qualified to rigorous MIL-STD 810F environmental & MIL-STD-461F EMI standards.
This Military Hi-Isolations amplified GPS splitter (Alternate Part# NHIALDCBS2) features one input and two outputs, TMC-type female connectors, 5-volt output voltage, and 9-32 VDC [customer supplied] source voltage with MIL DC Connector (Includes Mate).
- Precise amplitude balanced: <1 dB variation between ports
- Flat group delay: <1 ns variation between L1 & L2
- High isolation: 50 dB between ports, across operating frequency
- Wide accepted frequency range: covering entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
- Matched phase balance: <4° variation between ports
- Qualification and test reports available
AI disclosure: this description was generated with AI assistance from this product's own listing data.
Product Codes | |
|---|---|
| Mfr Part No: | MIL-NHIALDCBS1X2-T/5/MC |
Weight: 10.2 oz (289 g)Dimensions: 1.3 x 3.25 x 2.5 in (not including connectors)Operating Temperature: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHzCharacteristic impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 12 mA, typical (20 mA, max.)Isolation: 50 dB — 56 dBInput SWR: 2.0:1Output SWR: 2.0:1Noise Figure: L1: 2.8 dB L2: 5.15 dBAmplitude Balance: 1.0 dB, max.Phase Balance: 0.5°, typical (1.0°, max.)Group Delay Flatness: 0.73 ns, typical (1.0 ns, max.)Input P1dB: -25 dBmSource Voltage Option: 9VDC — 32 VDC (customer supplied) MIL-DTL-5015 10SL DC Connector (Includes Mate)Output Voltage: 5V @ 130 mAConnector Option: TNC type
- Stock: Out of Stock
- Manufacturer Part #: MIL-NHIALDCBS1X2-T/5/MC
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
