CUB/HIGH WING KIT-NO PLATE/25 89000008-001005
CUB/HIGH WING KIT-NO PLATE/25 89000008-001005KR 10 Lift Reserver Indicator | High Wing/Strut Mount, 25ft hose kit
The KR 10 Lift Reserve Indicator measures pressure at two points from an AOA probe mounted to the wing in reference to a wing chord that conveys changes in air pressure, via sense lines, to the KLR 10 IF module. The KLR 10 is a stand-alone system that does not interfere or replace any existing instrument or displays.
This KR 10 lift reserve indicator (Alternate Part# 008-001005) includes:
- KLR 10 indicator and cable
- KLR 10 interface module and power cable
- KLR 10 auxiliary cable
- High wing/strut mounting plating
- 25-foot hose kit
- Small flat-head screw driver for calibration
- Protractor
- Installation manual
- Pilot's guide
- Certificate of conformity
Product Codes | |
|---|---|
| Mfr Part No: | 89000008-001005 |
| SCHEDULE B CODE: | 9014.20.80 |
Operating Airspeed: 25 – 500 knots TASOperating Altitude: 0 – 30,000 ft MSLHumidity: 96%, maximumTemperature: -20°C to 66°C, operating -30°C to 85°C, storageVoltage: 12V – 28VElectrical Load: IF Module: <200 mA @14 VDC; < 100 mA @ 28 VDC Heated Probe: < 8 AMP @ 12 VDC & 24 VDCAngular Operation: -5° to 25° AOAPrecipitation: The KLR 10 probe functions properly when flown through non-icing precipitationDe-icing Fluid: No de-icing fluid restrictions on probeSideslip Operation: ±15° (Note: At sideslip angles of > 15°, the accuracy may be diminished. However, the error will cause the warning indications to provide a greater margin of safety prior to wing stall)Calibration Accuracy: A properly calibrated system will result in an accuracy of ±3% over the full scale of the calibration.
- Stock: Warehouse
- Manufacturer Part #: 89000008-001005
$2,639.99
