The SPC-10 static inverter utilizes solid state circuitry to convert 28 VDC to 115/26 VAC, 400 Hz sine wave power. Design features include pulse-width modulated square to sine wave power conversion permitting lightweight and reliable operation. Capable of delivering an overload of 150% of rated current for a duration not less than five minutes under all environmental conditions.
SPC-10(F) features DC ground, AC return, Remote On/Off, Phase Lock, On/Off Return. MS3106B20-16S mate.
The SPC-10(F) pin designation:
- (A) Remote On/Off
- (B) 115 VAC output
- (C) AC return
- (D) On/Off return
- (E) No connection
- (F) Phase lock
- (G) 26 VAC output
- (H) 28 VDC input
- (I) DC ground
Features:
- Solid state circuitry
- 400 Hz sine wave power
- Pulse-width modulated square to sine wave conversion
- Lightweight and reliable operation
- 150% overload of rated current
- TSO'd
Product Codes | |
|---|---|
| Mfr Part No: | SPC-10(F) |
| ECCN: | 3A999 |
| SCHEDULE B CODE: | 8504.40.0040 |
| TSO: | C73 |
Weight: 5.5 lbDimensions: 4.45 x 8.25 x 3.45 in overallInput voltage: 24 to 32 VDCInput current: 10.6 AOutput power: 250 VAOutput voltage: 115 VAC and / or 26 VACEfficiency: 82% min.Phase: SingleWaveform: Sine waveFrequency: 400 Hz ± 1%Amplitude distortion: Less than 7% (3% Typ.)Power factor: 0.8 to -0.95Altitude: 55,000 ftTemperature: -65°F to +160°F (-55°C to +71°C)Humidity: Tested to greater than 95% for 10 days, temperature was cycled between 75°F to 160°FEnvironmental: Qualified to meet RTCA paper D0-160 Env. Cat. D2BR--Input overvoltage: Operate up to 37 VDC input while supplying full rated VA output power. Output voltage under this condition is 115 VAC +5%, 7%.Input transient protection: Withstands without damage or degradation load exceeding 150% of rated output to an output dead short.Inverter delivers rated output on removal of above conditions.
- Stock: Out of Stock
- Manufacturer Part #: SPC-10(F)
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
