YAW SERVO/V FDBK, 14.58 RPM 065-00179-0600KS 271C Yaw Servo | 14.58 RPMThe KS 271C Primary Servo is used in the Roll and Yaw axis to provide AFCS control of the aircraft ailerons and rudder. It contains a servo motor with amplifier and an engage clutch solenoid.This KC 271C (Alternate Part# 00179-06..
xCruze 100 PITCH SERVO - B/Model: KS 0100EXP 8100-072xCruze 100 Pitch Servo | B Model KS 0100EXPPitch servo for the xCruze 100 Autopilot for experimental aircraft.B Model KS 0100EXPProduct CodesMfr Part No:8100-072ECCN:7E994SCHEDULE B CODE:9014.90.0000..
xCruze 100 Basic Servo - C/Model: KS 0100EXP 8100-071xCruze 100 Basic Servo | C Model KS 0100EXPBasic servo for the xCruze 100 Autopilot for experimental aircraft.C Model KS 0100EXPProduct CodesMfr Part No:8100-071ECCN:7E994SCHEDULE B CODE:8803.30.0010..
xCruze 100 Basic Servo - B/Model: KS 0100EXP 8100-070xCruze 100 Basic Servo | B Model KS 0100EXPBasic servo for the xCruze 100 Autopilot for experimental aircraft.B Model KS 0100EXPProduct CodesMfr Part No:8100-070ECCN:7E994SCHEDULE B CODE:9014.90.0000..
TRIM SERVO/4.70 RPM 065-00180-3500KS 272C Trim Servo | 4.70 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-3500) is rated at 4.7 rpm.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe s..
TRIM SERVO/3.6 RPM 065-00180-2700KS 272C Trim Servo | 3.6 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-2700) is rated at 3.6 RPM.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe ser..
TRIM SERVO/14.58 RPM 065-00180-0600KS 272C Trim Servo | 14.58 RPMThe KS 272C Trim Servo is used for elevator trimming. This unit (00180-0600) is rated at 14.58 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutch..
TRIM SERVO-8.2 RPM 065-00180-0800KS 272C Trim Servo | 8.20 RPMThe KS 272C Trim Servo is used for elevator trimming.
Version 065-00180-0800 is rated at 8.20 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchThe..
TRIM SERVO BELL 230 065-00162-0200KSA 572 Trim Servo Actuator | Bell 230 HelicopterThe KSA 572 trim actuator for the KCF 500 Dual Automatic Flight Control System incorporates into the helicopter control linkage. Trim actuators provide long-term control guidance by moving the control system to allow ..
TRIM SERVO BELL 230 065-00162-0100KSA 572 Trim Servo Actuator | Bell 230 HelicopterThe KSA 572 trim actuator for the KCF 500 Dual Automatic Flight Control System incorporates into the helicopter control linkage. Trim actuators provide long-term control guidance by moving the control system to allow ..
TRIM SERVO 065-0061-36KS-272A Replacement Trim ServoThe KS-272A Trim Servo is a replacement for the KS-272 Servo (part# 065-0029-36). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Trim Servo used in KFC-200, KFC-250, and KFC-250A Autopilot SystemElectrically driven..
TRIM SERVO 065-0061-04KS-272A Replacement Trim ServoThe KS-272A Trim Servo is a replacement for the KS-272 Servo (part# 065-0029-04). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A. Trim Servo used in KFC-200, KFC-250, and KFC-250A Autopilot SystemElectrically driven..
TRIM SERVO 065-00061-0050KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-50). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
Trim Servo 065-00061-0022KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-22). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System.Trim Servo used in KFC-200, KFC-250, and KFC-250A Autop..
TRIM SERVO 065-00061-0013KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-13). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
Trim Servo 065-00061-0006KS 272A Replacement Trim ServoThe KS 272A trim servo is a replacement for the Bendixking KS-272 servo (part# 065-0029-06). This servo is used with the Bendixking flight control system KFC-200 & KFC-250A Autopilot System. Trim Servo used in KFC-200, KFC-250, and KFC-250A Auto..
TRIM SERVO - 22.0 RPM 065-00180-1400KS 272C Trim Servo | 22.0 RPMThe KS 272C Trim Servo is used for elevator trimming.
Version 065-00180-1400 is rated at 22.0 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutch..
TRIM SERVO - 2.40 RPM 065-00180-0400KS 272C Trim Servo | 2.40 RPMThe KS 272C Trim Servo is used for elevator trimming. Version 065-00180-0400 is rated at 2.40 rpms.Contains a servo motor with amplifier and an engage clutch solenoidIs installed with a KM 275 servo mount, which contains a slip clutchT..