The 660534HS fuel flow transducer mounts to the engine fuel line and produces electrical signals that represent the fuel flow. The transducer body has hydraulic fittings that connect directly to the engines fuel line, and a small turbine wheel mounted inside with two precision ball bearings driven by the flowing fuel which incorporate a small magnet that is picked-up by a hall-effect sensor. Transducers based on hall effect technology can operate over a broader range of flow rates and in high temperature environments. This transducer also includes an integrated RTD temperature sensor.
Product Codes | |
|---|---|
| Mfr Part No: | 660534HS-00 |
In/Out Fitting: 3/4-16UNF-3A 37° Flare (SAE5309-8 or equivalent)Maximum Line Pressure: 2000 PSIGMounting Screws: 10-32 x 0.5 in (qty 4)Mounting Hole Spacing: 0.80 in square pattern, 0.187 diameterMounting Position: allWeight: 11 ozElectrical:Transducer Supply Voltage: 4.0 to 29 VDC, regulated powerSupply Current: 20 mA, maximumProtection: not internally fusedConnector: MS27505T9B35P on transducerConnector Mate: MS27467T9B35S with backshell M85049/49-2S8W or equivalentOutput Type: open/GNDOpen Circuit Voltage: 24 VDC, maximumExternal Pull-up Resistor: sized to limit current to no more than 15 mAFuel Flow (Performance parameters nominal for Jet Fuel at 20° Celsius):Flow Rate: 7 – 160 GPHK-Factor: 9,000 – 10,000 Pulses per Gallon (PPG) at 70 GPHOutput Type: pulsePressure Drop at 160 GPH: rotor free = 3.0 PSI rotor locked = 6.5 PSITemperature (non-TSO function):Sensor Type: Platinum Resistance Temperature Detector (RTD)Temperature: -55°C - 150°CSensor Output: 1kΩ, typical at 0°CScaling: 3.8Ω/°C, nominalAccuracy to Fuel Temperature: ±5°C (at steady state)
- Stock: Out of Stock
- Manufacturer Part #: 660534HS-00
Aircraft Fitment Finder
Returns & refund summary
- 30-day return window — with prior return authorization, unopened in original packaging.
- Restocking fee: 20% on unopened items, 30% on open-box items.
- Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
- Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
- Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.
Full terms: Return Policy.
Authenticity & authorization
We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.
See our full Manufacturer Authorizations page for the current per-brand status.
Need traceability paperwork?
If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.
Shipping
Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.
