Longer fulfillment
TRIM SERVO - 22.0 RPM 065-00180-1400
TRIM SERVO - 22.0 RPM 065-00180-1400KS 272C Trim Servo | 22.0 RPM
The KS 272C Trim Servo is used for elevator trimming.
Version 065-00180-1400 is rated at 22.0 rpms.
- Contains a servo motor with amplifier and an engage clutch solenoid
- Is installed with a KM 275 servo mount, which contains a slip clutch
- The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitude of the command
- The command polarity will determine direction of the servo rotation
- The command inputs have an impedance of at least 15K ohms
Product Codes | |
---|---|
Mfr Part No: | 065-00180-1400 |
SCHEDULE B CODE: | 9014.20.4000 |
Weight: 2.1 lbDimensions: 3.925 x 4.675 x 4.605 inMounting: Two (2) AN 3 boltsPower Inputs: +28VDC at 4.0 ampsClutch Engage Signal: +28VDC (active high input) and Ground (active low input)Mating Connector: 030-03248-0000Signal Inputs: -10VDC to +10VDCSignal Outputs: Trim Voltage: -28VDC to +28VDC Trim Sense: -3VDC to +3VDC
- Manufacturer Part #: 065-00180-1400
$5,286.29