Out of Stock - On Backorder
AMPLIFIED ANTENNA SPLITTER/With N connector. ALDCBX1X8-N
AMPLIFIED ANTENNA SPLITTER/With N connector. ALDCBX1X8-NAmplified GPS Splitter | 1 Input, 8 Outputs, N-type Connectors
This amplified loaded DC blocked GPS splitter features one input and two output for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.
This amplified GPS splitter (Alternate Part# ALDCBS1X8) features one input and eight outputs, N-type female connectors.
- Excellent gain flatness: <1 dB variation between ports
- Flat group delay: <1 ns variation between L1 & L2
- High output gain: 14 dB typical across operating frequencies
- Wide accepted frequency range: covers entire L-band & GNSS constellations
- Efficiently block ports: 200Ω resistors prevents antenna alarm faults
- Matched phase balance: <14° variation between ports
Product Codes | |
|---|---|
| Mfr Part No: | ALDCBX1X8-N |
Weight: 19.3 oz (547 g)Dimensions: 1.3 x 5.25 x 2.5 in, max. (not including connectors)Operating Temperature: -57°C to 87°CFrequency Range: 1.1 GHz — 1.7 GHZCharacteristic Impedance: 50ΩReq. DC Input V.: 3.3 VDC — 15 VDCCurrent Draw: 17 mAGain: 13.0 dB — 15.0 dB (14.0 dB, typical)Input SWR: 2.0:1, max.Output SWR: 2.0:1 max.Noise Figure: L1: 2.25 dB L2: 4.75 dBGain Flatness: 0.5 dB, typical (1.0 dB, max.)Amplitude Balance: 1.0 dB, max.Phase Balance: 14°, max.Isolation: L1: 16 dB L2: 12 dBGroup Delay Flatness: 0.25 ns, typical (1 ns, max.)Input P1dB: -23 dBm, typicalConnector Option: N type
- Stock: Out of Stock - On Backorder
- Manufacturer Part #: ALDCBX1X8-N
$1,079.99
