Menu
Your Cart

Amplified Splitter NALDCBS1X8-T/5/110

Amplified Splitter NALDCBS1X8-T/5/110
Out of Stock
Amplified Splitter NALDCBS1X8-T/5/110
AMPLIFIED SPLITTER NALDCBS1X8-T/5/110
Networked Amplified GPS Splitter | 1 input, 8 output, TNC Connectors

This amplified network loaded DC blocked GPS splitter features one input and eight outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other ports J2—J8 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.
 

This amplified GPS splitter (Alternate Part# NALDCBS1X8) features one input and eight outputs, TNC-type female connectors, 5-volt output voltage, and 110V source voltage. 


  • Excellent amplitude balance: <1 dB variation between ports
  • Flat group delay: <1 ns between L1 & L2
  • High output gain: 14 dB across operating frequencies
  • Wide accepted frequency range: covers entire L-band & major GNSS constellations
  • Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
  • Matched phase balance: < 14° variation between ports

Product Codes

Mfr Part No:NALDCBS1X8-T/5/110


Weight: 19.3 oz (547 g)Dimensions: 1.3 x 5.25 x 2.5 inOperating Temperature: -57°C to 87°CFrequency Response: 1.1 GHz — 1.7 GHzCharacteristic Impedance: 50ΩInput SWR: 2.0:1Output SWR: 2.0:1Noise Figure (Typical): L1: 2.25 dB L2: 4.75 dBGain Flatness: 0.5 dB, typical (1.0 dB, max.)Amplitude Balance: 1.0 dB, max.Phase Balance: 14°, max. between portsIsolation: L1: 16 dB L2: 12 dBGroup Delay Flatness: 0.25 ns, typical (1 ns, max.)Input P1dB: -23 dBmSource Voltage: 110 VAC [Transformer ITA Type A Wall Mount)]Output Voltage Option: 5V @ 130 mAConnector Option: TNC type

Write a review

Note: HTML is not translated!
Bad Good
Captcha
  • Stock: Out of Stock
  • Manufacturer Part #: NALDCBS1X8-T/5/110
$970.00

Aircraft Fitment Finder

Returns & refund summary

  • 30-day return window — with prior return authorization, unopened in original packaging.
  • Restocking fee: 20% on unopened items, 30% on open-box items.
  • Refund processing fee: 5.51% applies only to customer-remorse returns and customer-initiated cancellations. If a problem is our fault (our cancellation, unavailability, wrong item, confirmed defect, or shipping damage) your refund is 100% with no fees.
  • Return shipping: paid by buyer on customer-remorse returns; we pay return shipping when the problem is our fault.
  • Non-returnable categories: installed/used parts, special-order or rebuilt items, programmed items (incl. ELTs), batteries, AOG-priority orders, international orders.

Full terms: Return Policy.

Authenticity & authorization

We source products from manufacturers, authorized distributors, and established aviation suppliers as applicable. We are an independent reseller; we do not claim direct dealer or authorized-representative status for any brand. Documentation, source, and warranty eligibility vary by product and are confirmed on request.

See our full Manufacturer Authorizations page for the current per-brand status.

Need traceability paperwork?

If your installation requires FAA Form 8130-3, manufacturer Certificate of Conformance, or other traceability documentation, please call 1-877-722-8727 or email [email protected] before placing the order so we can confirm what is available for this part.

Shipping

Standard ground, expedited, and AOG shipping options are available at checkout. Full shipping-cost tiers and timelines are published on our Delivery Information page.